The configuration registry database is damaged

Similar Questions

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• The configuration in the registry information is incomplete or damaged (Code 19)

  I bought a laptop (e machines D525) recently, and last month the CD/DVD-ROM has stopped working. I always get this message "Windows cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (Code 19).

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Repair of Windows Vista Edition problem Home Premium: a the system registry file is missing or damaged. Status: Oxc000014C

  Hello

  I have a laptop Lenovo G550 with processor dual-core Intel, 4 GB RAM, 320 HDD with Windows Vista Home Premium 64-bit works fine yesterday. All of a sudden all processes be losed with strength and i' received e of error messages to send information or the rejection message. And then he suggested e to perform the disk check so I tried to restart to get the following message.
  Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C
  I tried all the boot options like the boot safe mode, last known, good configuration but without success.
  I tried to fix it by using a Windows Vista DVD,
  Press any key to boot from the CD/DVD...
  I see a bar saying Windows is loading files in progress...
  After that, I get progress bar of Microsoft Corporation followed to a black screen.
  After 10 minutes or so I get a mobile mouse on the black screen pointer. And that's all, he remains the same for centuries.
  I am out of resources on how to solve this problem.
  Any help will be greatly appreciated.
  Thank you.

  Hello

  That's what you should see when you use a Vista DVD take to do a Startup Repair:

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  You have obviously something wrong with it.

  See you soon.

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Cannot use the configuration information of the States DVD burner are incomplete or damaged

  I have an external PIONEER DVRW DVR X 162 DVD WRITER, and I can't use 0depenses with dvd software.
  the warning in the DEVICES MANAGER says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  What should I do now?
  Thanks, Mike

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Crash when updates at shutdown lead Error message 'one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. »

  Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.

  Hello

  • Your computer is on the field?
  If it is connected to a domain, then you can post your query in this link:
  http://social.technet.Microsoft.com/forums/en-us/categories
   
  If it is not then what is the error message in the history of the magazine update on the windows update site?

  See also fix it for windows updates.

  http://support.Microsoft.com/mats/windows_update/

   

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

  I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

  Original title: a registry file

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• What is shell management database, getting the error "shell management database is damaged or missing".

  I tried to uninstall nero 8 without success as he kept announcing that he had ceased to function... I get a signal that "shell management database is damaged or missing.

  I then tried to update nero 8 they suggested, also without success.
  I also tried to fix the problem using microsoft solve this Center, but the same signal (shell management data base etc etc) kept appearing.

  Hello

  See if that helps you.

  Read "Nero 8 Clean Tool" of their removal tool:

  http://www.Nero.com/enu/support-Nero8-tools-utilities.html

  See you soon.

• the system registry file is missing or damaged

  When I try to load up vista premium 32 bit edition on my laptop, a screen will appear and say the system registry file is missing or damaged and the custom of vista so load up, I just need my pictures of my son on my hard drive, all the rest does not matter, I even tried to use one of these inclosures of hard drive to see if I can get the data on the hard drive on my other computer laptop but has not been successful, I just need to know how to recover the system registry file on.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  System Restore restores the registry among other things, and this should solve your problem.  You should probably use the facility or the recovery disc to access this feature.

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (if necessary, you may need to do this drive on another PC / laptop).

  I hope this helps.

  Good Lluck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Organizer database is damaged and I can not find Organizer90 to remove the window troubleshooting

  The Organizer database is damaged and I can not find Organizer90 to delete the Troubleshooting window.

  On Windows:
  Note: These instructions require you to locate hidden files. By default, Windows Explorer does not display hidden folders. To make visible the hidden folders, see Show hidden files, folders and file name extensions. Windows XP, Vista, Windows 7 (kb402324).
  • Close Acrobat.
  • In Windows Explorer, navigate to one of the following locations:
    
    

    • Windows XP: [C:\Documents and Settings\[your username] \Application Data\Adobe\Acrobat\9.0
    • Windows Vista and Windows 7: \AppData\LocalLow\Adobe\Acrobat\9.0[your username]C:\Users\
  • Delete Organizer90.
  • Restart the computer.
  • Open Acrobat.

  This thread has what seems to be the solution to this problem:

  Re: Damaged Organizer Database - Pro 9.0

• Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Hi kathleenm92885635,

  Please check the solution in this doc. KB: http://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html

  Let me know how it goes.

  Kind regards
  Nicos

• Add errors to database with the ID of the configuration must not be empty!

  Everyone ran into a problem with the addition of a database? I am trying to add a postgres database and run into this error. Cannot understand the question exactly.

  The configuration ID must not be empty!

  In general, I see this when there is a space in the url jdbc line - either preceding or following the jdbc url.

• How to remove the configuration of logical standby database cleanly

  Hello

  We are on the BSG with 11.2.0.3 version of DB. For unknown reasons, we would like to recreate the logic of the standby database and for this I want to cleanly remove/uninstall/remove LOGIC of DATABASE of the EVE of the DATA GUARD configuration that we have.

  Setup of the DG has already 1 PHYSICAL STANDBY DATABASE that works very well. PRIM, PHYSICAL and LOGIC are all on different HOSTS. Could you please guide or we suggest exact MOS Doc id in this regard? I found an MOS Doc id which is close enough, but its steps include dg configuration completely deleting what I don't want. Only the logical Standby database must be delete itself so that it can be installed again properly.

  We use the CONTROL GRID and DATA GUARD BROKER.

  Bundle of thanks in advance.

  Best regards

  Hello

  Thank you very much.

  What I have is:

  -DROP DATABASE (from logical database in standby)

  -asmcmd > and removed the rest of the orphaned files related to the logical database.

  -DGMGRL > remove the database logicladb; one

  -Grid control > removed from here

  -deleted the database logical PRIMARY related to logic, for example, log_archive_config.

  Other steps > ID note (Doc ID 733794.1) about the LOGIC of STANDBY DATABASE (I think that MINING regarding)

  She's.

  Best regards