Watch the HD DVD on iPad?
I have a lot of HD DVD on my pc, I have Widonws XP running, and I want to enjoy it on my iPad, is that possible? It seems that iPad cannot support DVD movies so I ask my question here and really need hlp, thank you.
Ask questions on Apple devices on in the Apple forums, where people support them there. Here, we support people using Windows XP. http://www.Apple.com/
Tags: Windows
Similar Questions
-
Vertical green lines while watching the DVD M40-148
When I try to watch the video or DVD on my new laptop computer there are several vertical lines green dotted across the screen.
Why is this? And how do I get rid of them?Hello guys
It's very strange question. One of my friends has also M40 and I tested playback of DVD movies and everything works fine. It's very strange that you see these lines just while DVD player is running. Something like that shouldn't happen.
In my opinion, you should reinstall the unit with recovery DVDs and don t do any installation. Immediately after the installation of the operating system is trying to watch DVDs using a preinstalled DVD player. If the problem persists contact the Service partner and let check the device. The unit is fairly new and the warranty is still valid.
For all I know that the recovery image has been tested and something like that should not happen.
Good luck!
-
Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless?
Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless? I could see the pictures, but really want to see videos? I use the PlayMemories application for remote control. Any suggestions?
Hi bill54107,
Welcome to the community of Sony!
Unfortunately, you can not view videos recorded wireless using your mobile device. You can transfer videos on your iPad, but only if they are saved in the format. Mp4 format AVCHD files can be transferred wireless to a tablet or a smartphone. Enable the video double setting Rec to shoot AVCHD and Mp4 format at the same time.
You can only use the transfer of photos and AVCHD videos wireless when you download Wireless Auto Import (for Mac) and the House of PlayMemories.
If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch
-
Watch the OS 3 drain battery quickly
Since the update shows OS 3 last night, the life of my watch battery drains ridiculously fast. Every 20 minutes, I witnessed a battery drain for at least 4-5% without use. It's even worse when I use the app to training. I turned off refresh in the background app and the problem still remains. I also tried to restart the phone & shows as well as some non-matched and restored from backup. Still nothing.
< published by host >
Hello
Battery life varies depending on use and other factors.
During tests, for example, Apple has reached 18 hours of battery life with the next use: 90 time checks, 90 notifications, 45 minutes of usage of the app and a workout of 30 minutes with Apple Watch Bluetooth music playback.
As you have already tried disconnecting and rematching that progress of your watch, the following can help:
- Close all open applications on your iPhone to them and then restart your iPhone and your watch:
- I understand that you already restarted them, but this time also close all applications first:
- On your iPhone: double-click the Home button, and then drag upward on each Preview app to close;
- Close the two devices together, and then restart your iPhone first.
- I understand that you already restarted them, but this time also close all applications first:
- Find and install the updates that are available for third-party applications on your iPhone and watch.
- Check that you do not have a workout running or suspended in the integrated training application.
- If you already have (not necessarily only recently) already used any third party fitness, followed applications such as Strava to Records workouts on your watch, check on your watch to see if there is currently activity paused in the any of these applications. If there is, put an end to this activity of this application on your watch (not on your iPhone).
- If in doubt, it can help to remove this any application of third party fitness of your watch.
- Under earlier versions of the software, some users have reported problems with battery life in the framework using profiles and/or Exchange calendars. If you use an Exchange calendar, can help to one or more of the following:
- Check your Exchange calendar for all items before today.
- Delete / delete all old messages related to the prompt calendar Inbox (accept and refuse notifications).
- Create a rule in your email account Outlook moves future all accept and reject responses as they are received, in a separate e-mail folder that will not sync with your iPhone and Apple Watch.
- Consult your Exchange calendar to find errors.
- Finally, it can help to remove all third-party applications on your watch and then monitor the performance of the battery after you have added back, one at a time. It is the same regarding complications of watch face.
After trying the above steps, if your watch continues discover much shorter battery life than suggest examples of Apple you should expect, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to have your watch checked, if recommended by Apple (warranty, if it qualifies):
- Contact - Support official Apple
- https://Twitter.com/applesupport
- http://www.Apple.com/retail/Geniusbar/
More information:
- Close all open applications on your iPhone to them and then restart your iPhone and your watch:
-
Can I watch the sky go app on my ipad 2 via my hd tv by connecting iPad to my tv via digital of 30 pins of Apple
AV adapter?
Apple says you can show what on your screen. (?)
http://www.Apple.com/shop/product/MD098AM/A/Apple-Digital-AV-adapter
did you read the comments?
-
Replacing the CD/DVD with SSD
Hi, I have a mid-2009 13 "Macbook, and I plan to replace the CD/DVD drive (which it doesn't) with an SSD, instead of replacing it with a new CD player.
I would move so that OSX and software on the new SSD, leaving other data on my main hard drive. I read that the best solution is to install OSX on the SSD from scratch, since migration it seems impossible, but how then I could remove the 'duplicate' old of my HDD main OSX?
The entire migration process is not quite clear to me, I wouldn't mind some step by step instructions.Thank you in advance!
1st, I did it on an iMac, so I went through it.
You can use a utility cloning as Carbon Copy clone (demo fully active 1 month) or SuperDuper free (free for a full clone) to move your boot disk for SSD and it will be fully functional. In my case, I used Carbon Copy Cloner. It is even technically possible to use the Applications-> utilities-> disk utility-> restoration as a means to clone the drive, but I find it cumbersome.
<http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html>
I think you could also just restore a backup Time Machine for the SSD as well (although I did not do that, so I don't know the details).
You can do a clean install and get rid of any cruft you've accumulated over the years and then install only the stuff that you are currently using.
Or you could do a clean install and then use the Applications-> utilities-> Migration Wizard move above specific categories of files of initial startup disk.
After you have the SSD running with your software on it, consider allowing TRIM
<http://www.imore.com/os-x-10104-and-trim-support-should-you-turn-it>
I used OWC <http://MacSales.com> kit data-Doubler to replace my iMac DVD by an SSD. They provided everything I needed. I chose a kit including the tools I needed. I also watched the OWC installation videos, as well as on YouTube to become familiar with the installation. And I had a copy of the instructions to disassembly <http://iFixIt.com> and images to print for reference, while doing the installation. I would have recorded any screws that I removed the instructions that told me to remove that screw then I would make sure I would put the correct screws into the appropriate holes.
-
Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar
I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.
Thanks in advance.
Hi quietly,
If your CD/DVD drive doesn't work, how do you have a system restore?
Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?
Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
Check this box! -
Re: Question about the CD/DVD player for Portege M400
I have a Portege M100 - and the CD-ROM drive does not work.
Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.
It doesn't seem to be any firmware for this sorting (or am I wrong).
I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.
Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.
The description for the drive I want to put in the M100 is below:
Thank you very much for your time. :)
Description
DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3
Compatible models:
Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.
Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
Productivity:
Backup of important files
Easy access to CD and DVD based media
Use for multimedia presentations
Adapts to your lifestyle:
Watch your favorite DVD movies
Play music and games
Create your own DVDs or music playlist
Create CDs or DVs with ease
Transfer data seamlessly between two discs, improve your productivity
Reduce the time spent to transport and save files
Slide-in simple, plug-and-play operation
Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3Specifications
Speed (Max):
Read: 24 x CD-ROM, DVD-ROM 8 x
Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 ozHello
According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
TOSHIBA SD-C2612
TEAC DW-224THSo if you want to have good player get one of them.
-
Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure
Hello
I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.
Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.
When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.
I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.
Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
Would this work?
Anyone have any ideas?Here's an interesting article from Microsoft Knowledge:
http://support.Microsoft.com/kb/270008/en-usYou must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}Reboot the laptop and check if the CD/DVD drive would work again!
-
Qosmio G30-102 - update of the HD-DVD player
Hello
Despite having owned my system for nearly two years, I still had to use the HD of the STRANGE (TS-L802A) feature to watch HD DVD movies. I recently bought some old titles and started watching the first last week when after 10 minutes, the movie stopped and an error dialog box appears explaining that the media can not be read. After you haven't tried varioud reboots, re-install the reader software HDDVD Toshiba and a re-flash of the firmware still no joy to play HDDVDs. CDs and DVDs are still going strong.
Since I was out of warranty, I put on the search for a replacement unit and found a system of opportunity-pull SD-L802B on ebay for a reasonable amount of money, but with the bezel of a Toshiba Satellite, I can quite easily change. I checked, double checked and triple checked that the SD-L802B reads HDDVDs, and according to the writing on the Toshiba site, it is simply a newer version of the TS-L802A with 8 MB of cache instead of the 1 MB mounted on the TS-L802A.
So I bought the camera and having installed (and resorting to the peripheral solder pin 45 and 47 to make master) I'm finally greeted by a message popup explaining that the system has found a player SD-L622A. My heart is Serra.
It is clearly a CD/DVDR drive despiet the fact it has SD-L802B emblazoned on it. V622 (which should maybe have the game away!) and the Bios is 70.
It's a long shot, but I hope that the reader I can be flashed to make a complete SD-L802B on the remote hope that in all other respects the disc material is a 802, i.e. has HD ability but disabled for the 622. But my instinct tells me that it is in all respects a laser HD 802, but without the necessary decder, mounted on the PCB.
I'm a little angry that the original drive has failed in the beginning of the first place, likely a laser non-compliant HD cpl standards, but now more then a disc labeled as L802B turns out to be a L622A...
Any help appeciated, even if it is to confirm that the drive cannot be flashed to a 802 save me more time.
I might try the Flash but I fear that he would be completely useless.Thank you
Leo
Hello
To be honest, I can't believe that the HD-DVD SD - L802B drive has been flashed to be a SD-L622A.
I searched a bit on the internet and found this Toshiba page;
http://Toshiba-SDD.EMS-p.de/index.php?id=112&PID=221&SID=3
It s clearly mentioned that this drive reads HD DVD (including DVD - RAM) DVD and CD media.But unfortunately, there is no update of the firmware or anything else that might set the drive to the SD-L802B.
Maybe this isn't really a SD-L802B but it was sold as the SD-L802B
-
the account of google in my settings of mail/contacts/calendar sync or even watch the calendar that has been added successfully
Hello 10thCOMMANDMENT,
Thank you for using communities Support from Apple!
After reading your question, I understand that you are unable to get the Gmail calendars to work on your iPod touch. When you view your Gmail account in settings > Mail, Contacts, calendars that you see this screen below?
Add an e-mail account to your iPhone, iPad or iPod touch - Apple Support
If you enable calendars from this screen, you should have your Gamil calendar available in the calendar application.
See you soon!
-
Problems installing the 4-DVD set 2013
I am trying to install LabVIEW 2013, with the real-time Module, DAQmx and a few toolboxes Vision module, using a Kit of Distribution 4 - DVD. I use the feature very attractive who appeared in the 2012 LabVIEW Distribution Kit - when you put it in the DVD - 1, it shows you all the available Toolkits and Modules. You can check as many as you need, and he moved between them, apparently to 'DVD-order' (i.e. DVD-1, then DVD-2, then 3-DVD, then DVD - 4).
The problem is that when you finish and reboot your PC, the Services NOR critics (who could have been present before installation) are missing, leading to a behavior very interesting, one-power-say "buggy".
According to engineers of NOR, I'm not the only one who saw the specific results after installing LabVIEW 2013. In my case, I installed LabVIEW 2013 on 4 PC, all with at least 2012 present LabVIEW on a previous installation (and work fine before installing LabVIEW 2013). A PC continued to operate properly after installation of 2013, but the other three were absent OR Services.
After some tests, I realized how to install LabVIEW 2013 to avoid losing services - simply go back to recommended practices OR installation, I used in most earlier versions of LabVIEW. Instead of taking the 'shortened' to specify all the packages to install both, one-at-a-time installation packages, in the following order (at least, this prescription "worked for me") - LabVIEW, the Time Module, any Module, all Toolkits, DAQmx, and device drivers. After that each piece is installed, allows the system to reboot if it is said that he needs to do.
Watching the process carefully, I see that some installation steps "kill" LabVIEW services, but the subsequent reboot brings back them (and sometimes add new services). I suspect that the method of the "all-at-once", which has only a single reboot at the end, somehow fails to resurrect killed service, leaving a paralyzed installation.
Making an installation package is both slower, involves the exchange of DVD much more, but seems to work. I sent my comments to OR, and they are working on the issue.
Bob Schor
OR just released update 1 for 2013 LabVIEW that solves the problem by doing an 'All-in-one' of 2013 installation, according to me. In particular, he seems to reinstall the Service Locator Service. I'm largely 'patched manually' most of my systems, but I think I've seen one of my non-working fixed PC.
-
I took pictures with my camera and load them on my pc. ithen them engraved on a dvd .Although I can watch on my pc I can't watch on my dvd.
what I am doing wrong, and someone can help
Two thoughts.
1. not all readers of DVD load serious records
2. don't you finalize the disc when you burned it?
-
The CD/DVD tray on my eMachinesT3616 will not open.
The CD/DVD tray on my eMachines T3616 will not open. Solution?
Hello
The drive is just stuck?
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Also have heard double tape on a credit card or play can work.
===========================================================
If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I watched a dvd on my computer. Now, the disk won't work. I tried to hit the eject button on my computer, I tried going to computer, hit the button for the disc and then hitting eject. I also tried the thing of a paper clip. I've never had this problem before. What should I do?
leopardclaw,
The disc is always running or is he arrested? If it runs at all times, he won't allow the disc to be ejected. What software you used to watch the movie? Have you tried to load the software to see if the film will play? Then you can tell him to stop and eject the disc. If the disc does not turn, go into Device Manager and see if it sees the drive and if it has no exclamation mark above him. Try reinstalling the driver to see if that gets the drive works again. If it does not, and does not appear in Device Manager, it is possible that the player has gone wrong and you may need to get a computer tech to look at it.Let us know if this has been useful and how we can help you.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Yahoo mail stopped pushing for iPad and iphone
From this weekend past my yahoo email stopped pushing on my iPhone and the iPad 2. My wife is having the same problem with his email yahoo on its devices. If I go into the mail app it will retrieve my emails. Delete the account and readded does no
-
Firefox is continually changed back to Firefox 23 24
I upgraded and installed from FF23 to FF24, once he was released. Since last week, I encountered the problem. One day I started to FF24 and it prompted to restart to complete the previous update of Firefox (However, there is no update triggered by me
-
Best computer for home use with lots of photos
I don't know crap about computers! I listened to my presentation woman to have 2 HDDs and has 10 something mega ram. Gets the internet and has at least 3 or 4 usb something. Disk drive. I saw something at best buy which was about $900. and the other
-
BAR the deployment of the package in eclipse
Since then, I've changed my signature key in eclipse, 'run as' reports an error:result::failure 881 the application author does not match the author token of debugging Yes, in the MANIFEST. MF file in the package BAR always has the bad (old) author.
-
Windows cannot find the 3668Microsoft software license terms [Windows 8 companies]
I have an image of Windows custom Enterprise 8 13 GB (with office, UI, apps and Lenovo customizations specific apps/drivers pre-installed, also auditioned the build to create a standard set of tiles of App in the splash screen for all users by using