On the Windows Services and processes

Similar Questions

• I downloaded Windows XP from the Windows Service Center. It is an exe file. How can I extract this to a disc and burn I can install it?

  I downloaded Windows XP from the Windows Service Center. It's a .exe. When I click on it, it is extracted to a folder I called "xp". How can I obtain these data on a disk to install XP from a CD? Should what steps I take? I am running Windows 7.

  original title: Burning a disk XP

  Putting aside if the 64-bit version of XP is what you need, when you ran the exe, the file that was extracted (i.e., in the folder named "xp") should have been an ISO file.

  Files ISO are CD images and are intended to be burned (NOT copied) to a writable CD.

  Assuming that you have the correct hardware (CD burner), you can burn your ISO as described here: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-from-an-ISO-file

  Note that what you downloaded is NOT "Windows XP Mode" which is available for use with Windows 7 Professional, enterprise or ultimate edition.  The image you uploaded is for installation on a separate computer (or in a dual-boot configuration) - assuming you have the required license keys.

• Windows and Windows update install error 641 that install the windows service could not be accessed

  Original title: Windows Installer and windows update error 641

  I get the following error when I try to install the latest Java Update. "The windows service install could not be accessed. This can happen if windows install is not properly installed. Contact your support team. In addition, I now have 14 exceptional installed updates which always fail with error 641. I have Vista 32-bit SP2. In addition, in respect of the services Windows Installer does not show so I can't restart. I tried all the other patches. Any ideas?

  So what do you suggest...

  Have you tried the resolution in RESPONSE to my colleague Maurice message in this related thread yet? -Online http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  Have you contacted Mechnic (iolo.com) support system yet?

• Windows vista - 8007371-b code keeps coming up and I have the windows service pak 2

  My Windows Vista Home Premium will not update. 8007371b code keeps coming up and I have the windows service pak 2? Just after the service Pak2 it says "Upgrade Windows Vista"

  These are the following updates will not install:

  A security update cumulative for the ActiveX for Windows Vista (KB2618451) stop bits
  Update security for Windows Vista (KB2644615)
  Update security for Windows Vista (KB2658846)
  Update security for Windows Vista (KB2676562)
  Update for Windows Vista (KB2679255)
  Update Rollup for the ActiveX for Windows Vista (KB2695962) stop bits

  I tried to install them separately. I also used the Microsoft Fix thing too. Nothing works. Can someone please help! Thanks :)

  Hello
  Are what Microsoft Fix you referring?
   
  If you haven't tried the following and then try the same thing and check:
   
   
  Method 1:
  You can try the steps in the following article and check if it works:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Method 2:
  The steps in the following article to see if it works, try:
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  Let us know the result!

• message "the windows service is not running" and it will not check for updates

  Original title : I'm trying to run the update and it says my windows service does not work and it checks the updates... How can I solve this?

  I am trying to run windows update and it said: my windows service does not work and it checks the updates... How can I fix it?

  Hello.

  Did you change your computer?

  Method 1:

  I suggest you to follow the steps and check.

  Click Start, in the search box, type in Services,

  Check the status of the following service and ensure that they are running

  Background Intelligent Transfer Service

  Cryptographic services

  Windows Update

  Under each service, click Start

  General, and then click Start under the service status:

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also:

  I would also say that reset you windows update and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Windows 7 Security Center service is missing from the (local) services and cannot be started

  Hi Experts,

  I use the version of windows 7 Home premium. My computer suddenly got hit by the virus and I found the message in the center of action as "Activate windows Security Center service", but when I do, the message I m getting "failed to start the windows Security Center service"

  Options, I tried to replace as follows.

  one) went to the services (local) and checked the Security Center to check the startup mode but the Security Center is missing here
  (b) tried to run the malwarebytes software, he finds some virus and I deleted

  Yet, I could not able to get rid. Help, please

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Chech also the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

  This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

  Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot, try to install the programs and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  I suggest to try the methods mentioned in the following article and check the status of the issue.

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

• Tried most methods still Cant turn on the windows firewall and windows defender

  k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help

  Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help

  An Antivirus is a fundamental need for security to prevent malware being installed.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For an Antivirus, install one of these free AVs (installation more than it will cause problems).

  And first of all remove any AVs expired may still have installed:

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Avast Antivirus:

  http://www.avast.com/free-antivirus-download#TAB4

  See you soon.

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• What the handles, threads, and processes means or function, they are performing?

  My son will ask me a question and I could not answer (it is perhaps a good thing because I think he will try to enter and change something he doesn't know) so I thought that I felt I'd better try to find out. He and I are eager to know what the handles, son and process average or functions, they do. They are in the performance tab in Windows Task Manager.

  
  
  Thank you

  Hello

  A process handle is an integer value that identifies a Windows process. The Win32 API call a HANDFUL.

  When you start a program, this program runs as a "process". It's something that runs in its own protected area, with its own memory. Other processes cannot touch this memory.

  A few times, the program needs to do several things at once in a way of multitasking, similar to how the multitasking process. For example, a spreadsheet can recalculate the cells you enter data. He * could * start another process, but they can't (easily) share the memory, he would need to if recalculate cells!

  Must be a different sort of process that is not quite as separated. It is a "thread".

  Process: the number of applications that are running at some point in the computer.

  Hope this information helps.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Can not turn on my computer... "the windows logon system process unexpectedly... system shutdown.

  When I turn on my computer, a blue screen appears and it says: 'the windows logon system process done unexpectedly...... closed system '. "what this means?

  I forgot to answer one question:

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The most likely problem is that this file is missing:

  c:\windows\system32\winlogon.exe

  It might have been put in quarantine (actually deleted) by your antimalware/antivirus program, if you need to replace it.  There are other copies of the file on your system, which you can use to replace the missing file.

  You have to boot your system on something to do that, so if you have no real XP bootable installation CD, make a CD bootable XP (no XP media required) Recovery Console.

  Sometimes there is a problem to get into XP with XP Home Recovery Console, but work on this first, then we will see the replacement of the file:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  When own running chkdsk/r, we can replace the file.

• Cannot open documents of microsft because the Windows service install could not be accessed

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

  Try to download and install Windows install
   
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  The version you need for XP is the bottom of those listed.

  wrote in message News: * e-mail address is removed from the privacy *...

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Could access the Windows service install.

  "Could access the Windows service install" is the message that I get when I try to install itunes.  I had difficulties to install other programs as well.  If windows install is a program, how can I fix it?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner