ON Vista Home, I made a folder of photos from an SD card.

Similar Questions

• Change the order of photos in a folder of photos from Windows 7 Pro

  I am a wedding photographer and until this week have used XP Pro. Due to a blow up PC, I had to get a new one with Windows 7 Pro on this subject. Under XP, I edited my photos in Nikon Picture Project and then copied to my images. I could then change the final order, they appeared by clicking on the left and drag it. This does not work when I copy them into a folder of photos of Windows 7 Pro, I can't change their order of appearance, I need to do this before I burn it to a CD/DVD to give to a client. It's a minor thing but cause me major problems. I note that I have almost 70 years and it took me several years to master XP, there isn't a lot of time to master Windows 7 no matter what help would be really appreciated.

  Depends on exactly how / what to order you need.

  In the images window, to the tr at the top of the page there are a few options to "reorganize by.

  There is also a drop-down list arrow options view

  Also on the title header for example name/Date etc if you click the title files will be re-arranged, usually to name, in alphanumeric order and Date, asscending or descending

• OK, I have a legal copy of vista Home premium with service packs and updates from microsoft and want to start clean with a clean installation I do not have the original, only recovery and put installation disc at level Express disc?

  OK, I know that this may be simple for most, but I have an of a moment _ this find.  As I said legal copy that has been saved... I backed up all my files on DVD, I don't care if I lose all the programs that I can always download them later.  Basically I want is that it was when I brought home the first time.  I searched high and low for the original disc of Vista but no luck.  I do not have people upgrade at any time, but I was not able to find a definitive answer about it online.  Not too complicate it again but I have 4 GB of ram and processor can run 64-bit, and I have 32-bit curently I'm sure you know where I'm going with that.  I know a little about how to do it, but want reasurance and direction from someone who knows hit safe and ready to help.  Any person who get end to this nightmare for me will be really appreciated.

  Shaun

  Contact the manufacturer to obtain a set of recovery discs original (for a fee) and use them to make the initial installation.  Activate it.  Then you can do the upgrade and activate that.  You must install the original operating system in order to install the upgrade.  If you are going from 32 bits to 64 bits that cannot be done with an upgrade - which requires complete and clean installation.

  Here is the Microsoft policy on replacement software; http://support.microsoft.com/kb/326246.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to import photos from an SD card. CAN copy a file from the SD card on the desktop and the view. can display the file to the SD card. When trying to copy or move the file to a folder, I get an error message: cannot copy IMG_0242: the parameter is

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  =============================
  I do not think that the 'Read only' attribute of your
  file is the problem... in fact, it is typical.
  All files on my XP Pro system have a
  Square marker (not checked) to playback
  Only the check box.

  If you want to experiment the following article...
  explains how to change the read-only attribute.

  (326549) you cannot view or change the
  Read-only or system attributes
  in Windows Server 2003, Windows XP, in
  Windows Vista or Windows 7
  http://support.Microsoft.com/kb/326549/en-us

  More information in the following article:

  Why can't erase or reading the value
  Only attribute checkbox on a folder?
  http://www.jimmah.com/Vista/security/read_only_folders.aspx

  Now for the photos... lets make an experience.

  Open your folder my pictures and create a new folder...
  File / new / folder... (more on this shortly)

  Insert your SD card into your Media Player. Do not forget
  to slightly press the card at the bottom of the slot.

  If the Autorun screen opens, close it.

  Reach... My computer or on the removable click
  Disk that corresponds to the location of your card is in.

  In the menu... Choose... Explore.

  You should be able to see the directory of the card.

  Open the folders and find pictures.

  Reach... Edition / select all... then... Edition / copy.

  Right click on the new folder that you created in my
  Images, text and the menu... Choose... Dough.

  Transfer files or you still receive the error?

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Vista does not recognize videos on my SD from Panasonic camera card.

  I have a Panasonic HD camera and record pictures and video on this subject. When I connect the camera to my computer Vista OS ACER 5515, it only reads the photos and not the videos, when I connect the same camera to my XP system, I have no problem with transfer of videos. The same camera software is on both computers. How can I get this problem corrected?

  Hi mark44004,

  1. were you able to transfer videos before?

  2. what happens when you try to access the videos?

  3. what happens if you copy the videos from the camera to a folder on your hard drive?

  4. What is the file format or the file of the video file extension?

  This can occur if a video file type is not supported on Vista.

  Check the link for more information:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Eliminate the prompt at startup to sign as an administrator or guest in Windows Vista Home Premium

  I write on behalf of a client. The customer wants to know how to remove the prompt at startup to sign as an administrator or guest in Windows Vista Home Premium. I hope to hear from you.

  I write on behalf of a client. The customer wants to know how to remove the prompt at startup to sign as an administrator or guest in Windows Vista Home Premium. I hope to hear from you.

  The computer does NOT prompt you to sign any particular account.
  He simply open a connection with all available accounts screen and the user must specify the logon account.

  The user has an option to configure the computer automatically log on to the user account without going through the login screen.
  BUT, to do that, the user must be administrator or in possession of an admin password.

  Here is the tutorial to do.
  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  Please note that this forum prohibit anyone who helps users to bypass the password protection, regardless of the reasons.

  Here is the link to said police Forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• How to remove the virus Vista Home Security 2011?

  Vista Home Security 2011 has blocked internet activity from my computer. It is unregistered and I can't understand how deleted.
  I did a full scan with McAfee and it blocked three viruses.

  I see the path of the program, but cannot locate.  C:User/Joe/AppData/Local/JLL.exe

  .

  There are removal instructions here for this class of fake antivirus

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

  You don't have an internet connection, you will need to download the necessary programs on another computer and transfer them to the computer infected via a flashdrive etc.

• Vista home really not yourself perform IIS?

  Vista home really not yourself perform IIS?

  I added IIS of the Add/Remove windows components.  It seems to install.

  However I don't see an IIS management console.  Nor can I add IIS in the mmc.  I don't see the service.

  Thanks for help

  Then try to run SQL + Reporting Services Vista Home Basic will not happen?

  From what I have read and understood, which are few in the two counts, the answer is: no go.
  Home Basic can not support the Web server.

  Excerpts:
  Vista Home Basic has enough IIS features in WCF support and has no server has Internet (like static-files/directory-listing/asp/asp.net/ssinc etc)-you cannot use IIS on this reference as a web server.
  Source: http://forums.iis.net/t/1103525.aspx

  t-4-2

• Accidentally deleted the folder Microsoft Games (VISTA Home Basic)

  My mother had problems with solitaire and other games included with his eMachines desktop computer in the Microsoft Games folder.  His machine is running Vista Home Basic.  I tried to fix it by copying it in the folder Microsoft Games laptop (Vista Home Premium) wife.  However after that I copied on games, when I tried to launch the game, I got an error message that the games would not be on this version of Windows Vista.  Where can I get copies of these games that will run on Windows Vista Home Basic?  All software has been preloaded on the machine when she bought (not Windows discks, etc.).  These were included with the machine.

  Thank you

  Steve

  Click the button start , click Control Panel, click programs and then click turn on turn Windows features on or off. In the Windows features dialog box, select the Games check box, and then click OK.

  If it is already selected it disable the option and press OK and then select it again and press OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-about-Windows-games

  If this post answers your question, click mark as answer .

• Scan to folder installation network - Win VISTA Home Premium

  Printer is HP Officejet Pro 8600

  When I try to install the Scan to folder network on a desktop computer running Win VISTA Home Premium Web page displays the message "Internet Explorer cannot display the webpage".  There is no option to continue anyway.   Under Tools > Internet Options > security all parameters have a default value.

  On my old laptop under Win XP SP3 and newer laptop running Win 7 Home Premium, when I run the analysis of the installation of the network folder, I have to continue, and then configuration page will become available.   Under Tools > Internet Options > security settings are set to default.

  I'm curious to know why I can't have analysis of screen network on Win VISTA Home Premium system folder but I can do on both other systems?  All three computers are on the same home network.

  P.S. as for the Scan to E-mail Wizard, which gives the message that this option is not available on my printer, however on the touch of 8600 printer screen option is there and he tells you how do it.  Scanning to Email app also allows me to scan to e-mail.

  Initially this feature was not mentioned on all models of the 8600, just the models more and premium that you note. However, due to the overwhelming popularity of this HP feature published scanning to email app for the majority of printers who have access to web services.

  I hope that answers your question!
  

• Delete a folder in Vista Home Premium

  I can't delete a folder. It seems to be fixed on Outlook.exe, PID 1528, Type manage. I don't know what it means and I would like to delete this folder. I use Vista Home Premium.

  First absolutely sure you want to delete the folder - it may be important for some functions (for Outlook).  If you're convinced you want to remove it and the function of normal removal in Vista will not work, then try one of the following two products: killer file: http://www.malwarebytes.org/fileassassin.php or Unlocker (my preference) to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml.  They often work when the Vista standard delete function does not work.

  It could also be because of permissions or file ownership.  Here's how to deal with these two issues, if they prove to be the case (once you have you can always use one of the above two products to get rid of the file/folder, but then they will probably work):

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.
   
  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sharing files on home network - Vista Home Premium 32 and 64

  Hello people,

  I searched for hours, I made countless different steps to try to understand this point, and yet I'm still far away.
  I have two computers on my home network.
  -Machine 1 is Vista Home Premium 32-bit and is connected via a wired connection to my NetGear router.
  -Machine 2 is Vista Home Premium 64-bit and is connected via a Wireless connection to my NetGear router.
  I have a WD WorldBook connected to the Machine 1 via USB and I would like to be able to access it through my home network on Machine 2.
  Here are my settings that may be useful to know.
  Machine 1:
  -Cable
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE
  -File sharing: WE
  -Public folder sharing: OFF
  -Printer sharing: OFF
  -Password protected sharing: WE
  -Media Sharing: OFF
  Machine 2:
  -Wireless
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE

  -File sharing: WE

  -Public folder sharing: OFF

  -Printer sharing: OFF

  -Password protected sharing: WE

  -Media Sharing: OFF
  If I go into start-> network on the Machine 2 I see the other computer and the router, but when I click on the Machine 1 I get the following text:
  Windows cannot access \\Machine#
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035
  The network path was not found.
  However, when I go to start-> network on computer 1 and click on Machine 2, I have no problem connecting.
  Does anyone have an ideas that could help me understand what is happening?
  Thank you!

  Hello

  Thanks for the detailed information.

  We need additional information to help you with the problem, please answer the following.

  What antivirus application do you use?

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Method 1:

  Disable the firewall on the Machine 1 and check the status of the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Note: In addition to a firewall, you must also be an antivirus and anti-malware program to help protect your computer. Install Microsoft Security Essentials or another antivirus and anti-malware program and update it. Many of these programs update automatically.

  Method 2:
  Error code 0 x 80070035 indicates that the network path was not found. This problem occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.

  (a) click on «Start», enter "NCPA. CPL"(without the quotes) and press ENTER.

  (b) right click on the connection you use for the local connection, and then click "Properties".

  (c) click on the button continue to check the permission of the administrator.

  (d) click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  (e) click on the button "Advanced" in the opened window. On the "WINS" tab, select 'Enable NetBIOS over TCP/IP' and then click 'OK' to save the setting.

  The following article presents NetBIOS over TCP/IP.

  NetBIOS over TCP/IP

  http://TechNet.Microsoft.com/en-us/library/bb727013.aspx

  I hope this helps.

• Requested help recovering from the change that I did for the 'Public' of Vista Home Premium file permissions for everyone

  I made a blunder when changing the permissions of public folders for everyone.  I am now connected to Vista Home Premium on my home PC as an Admin will be complete permissiongs.  When I right click on the folder Public, pooling and property options are both now gone.  How to restore the availability of these options?  Also, I can access to is no longer the files that I previously copied into the Public folder.  How can I restore my access to these files?

  Have you started with elevated privileges command prompt? Just running in the administrator account is not enough. Looks like you don't have because it starts in your user directory. If you were high would begin in the Windows\System32 directory.

  See: http://windows.microsoft.com/en-US/windows-vista/Command-Prompt-frequently-asked-questions

  Orders, you should get something like this:

  Takeown /f /a C:\Users\Public
  ICACLS C:\Users\Public/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public/Grant "Administrators: (F)".
  Takeown /f C:\Users\Public\*/a
  ICACLS C:\Users\Public\*.*/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public\*.*/Grant "Administrators: (F)".

  I can't guarantee that this will fix your system. You must give permissions for the system and other users accounts.  If you have access to another system, I would compare the settings there. These programs will help you determine the permissions associated with a system

  • AccessChk http://technet.microsoft.com/en-us/sysinternals/bb664922
  • AccessEnum http://technet.microsoft.com/en-us/sysinternals/bb897332

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET