On vWorkspace Powershell problem

Hello

I use the Get-QVWFarm command in PowerShell, but return FarmName field is empty. I try to change

FarmName in CB and it does not work. Can someone give me advice? THX

If you have run

Connect-QVWFarm-farm "vWorkspace database"

I have a feeling that I had the same problem and the farm name only gets put after you connect for the first time. However, you also don't use the name of the farm, but the alias here to following orders, for example the beginning of one of my monitoring scripts is:

import-module vWorkspace
Connect-QVWFarm-farm "vWorkspace database"
$problem_computers = get-QVWComputer-farm "vWorkspace Database" - Filter {$QVWComputer.Status.LogonState - not ' connected' - and $QVWComputer.Status.LogonState - not "logged out" - and $QVWComputer.Status.LogonState - don't 'LoggedOff"}

Tags: Dell Tech

Similar Questions

  • VWorkspace PowerShell Module for 8.5?

    After the upgrade to vWorkspace 8.5 I can no longer use the PowerShell Module. I get an error when you run Connect-QVWFarm that the version of database should not. Any idea when will be released the update of Powershell 8.5?

    Hello

    The Powershell 8.5 module is now available!

    http://en.community.Dell.com/TechCenter/virtualization/vWorkspace/b/vWorkspace-blog/archive/2015/06/01/Dell-Wyse-vWorkspace-8-5-PowerShell-module

    Thank you

    Sam

  • vWorkspace Powershell - find logon failed

    Does anyone know if it is possible to find logon failed "" for a machine through the Powershell cmdlets vWorkspace?

    As far as I know that there is no option for this in the get-qvwcomputer cmdlet and the qvwcomputer object.

    Thank you
    Hilbert

    Hi Hilbert,

    We will add this as a feature request! Thanks for the comments.

  • vWorkspace 8.0MR1 Powershell error - cannot locate permission for target

    I installed the version 8.0.306.0029 of the Powershell Module for vWorkspace and I see a problem with the New-QVWManagedApplication cmdlet. I have all the settings according to the wiki for the specified cmdlet, but he came back with the message below pointing to an issue with target. I couldn't find anything in the reference of the cmdlet on the objectives, so I don't know what I'm doing wrong.

    Here is the syntax I used and the result. I tried leaving a number of parameters but the same result.

    New-QVWManagedApplication-name 'Powershell Test' - SessionHost P14TS4-Path 'C:\Program may Explorer\iexplore.exe' - InitialWindowState normal vWorkspace - SeamlessWindowMode-Enabled $True - LoadBalancingSetting - SessionSharingEnabled $True - NotSpecified DisplayName 'Powershell Test' - close "vworkspace database.

    New-QVWManagedApplication: unable to locate permission for target [PN_PERM_TARGET_MANAGED_APPLICATIONS]
    [PN_PERM_ADD_APPS].
    On line: 1 char: 1
    + New-QVWManagedApplication-name P14TS4 - SessionHost "Powershell" Test - path C:\ «...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo: NotSpecified: (:)) [-QVWManagedApplication] new KeyNotFoundException)
    + FullyQualifiedErrorId: System.Collections.Generic.KeyNotFoundException, Quest.vWorkspace.PowerShell.Clients.NewQVWManagedApplicationCommand

    If it helps our environment is 8.0 since the launch with the gateway servers, IIS, management and broker 2012 with 2008R2 Session hosts. I installed PowerShell module on one of management with .net 4.0 and PowerShell 3 servers as required.

    Hello

    Dev did find something interesting in this newspaper.

    If you have access to SQL Management Studio, please access your pnadmin.dmdefinedpermissions and select the top1000 lines.

    If there is only a few permissions, please post a screenshot. Are there hundreds, batch export to CSV and then he will have to find a way to do this to me.

    Thank you, Andrew.

  • VWorkspace abount Powershell

    Hello

    I downloaded vworkspace powershell module 8.5 and install in CB server. I opened powershell

    input interface "import-module Quest.vWorkspace.Powershell", but does not work. I change the folder to the

    vWorkspace powershell install folder and 'import-module entry.

    .\Quest.vWorkspace.PowershellModule.dll"feel works. But I have the cmdlet "Add-QvWComputer-farm".

    vWorkspaceFarm - ComputerGroup 'Test' - 'Test002' identity' does not work. Can someone help me?

    One of the changes in this version is that the module name has changed.

    It was formerly "Quest.vWorkspace.PowerShellModule" but now, with this version, it is «vWorkspace»

    You can check by yourself using the following cmdlet:

    PS C:\ > Get-Module - ListAvailable

  • PowerShell for vWorkspace 8

    Hello

    any ideas when powershell for vWorkspace 8 will be available?

    Or are there other features of the API?

    We need automate the creation of group, creating Application, user assignment etc.

    Thank you

    jeje

    Hey everybody.

    Sorry for the delay. The new PowerShell module was published: http://en.community.dell.com/techcenter/virtualization/vworkspace/b/vworkspace-blog/archive/2014/05/08/vworkspace-powershell-module-new-beta-available

    Adam

  • Self-closing session after a certain period of time...?

    Hello

    I started out our VDI in public which is used by our students, I noticed the majority of our students, they are not logoff session and they just disconnect the session. It is management overhead for the helpdesk guys visit the disconnecting Desktop Group and forcibility all unplugged session of the Group of students.

    Is there a way I can auto disconnect all disconnected sessions who spent 15/30 minutes?

    If not, I'm sure this can be using vWorkspace PowerShell, if the answer to this question No. and Yes for the PowerShell, can you please tell me to download PowerShell link?

    Kind regards

    Hello

    Respond to this request;

    Apply a setting to force the disconnection of the services Terminal Server sessions disconnected after a period of downtime of group policy.

    -Open the Group Policy Editor and select an appropriate GPO, or create a new if necessary.

    -Navigate to computer configuration | Policies | Administrative templates | Windows components | Remote Desktop services | Remote Desktop Session host | Session time limits

    -Locate the "Time limit for disconnected sessions" setting enable this policy setting

    -In the drop-down list, select the time limit for disconnected sessions

    If you enable this policy setting, disconnected sessions are deleted from the server after the specified time interval. To apply the default behavior for disconnected sessions are maintained for an unlimited time, select never. If you have a console session, the disconnected session time limits do not apply.

  • problem uninstalling windows powershell 1.0

    An interesting problem - I tried to install windows xp professional on windows xp family and received the message that xp pro cannot be installed on windows powershell 1.0. So I used appwiz.cpl in the command prompt and windows powershell is not listed as being installed. So I went through Control Panel/Add / Remove programs and it is not listed, it will fade.

    But when I click on Star/All programs - windows powershell is listed in effect and it works!

    How to uninstall windows powershell?

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    Above is a link to the XP newsgroups.

    They may be able to help with your problem related to the XP.

    http://support.Microsoft.com/default.aspx/KB/926140

    To the bottom of the MS above link is the uninstaller for Windows Powershell News:

    To uninstall Windows PowerShell 1.0, follow these steps:

    1. Click Start, click run, type appwiz.cpl, and then click OK.
    2. Click to select the Show updates check box.
    3. In the currently installed programs list, click Windows PowerShell (TM) 1.0, and then click Remove.
    4. Follow the instructions to remove Windows PowerShell (TM) 1.0.

      Here is the Vista Forums.

      See you soon. Mick Murphy - Microsoft partner

  • Problem with linux vWorkspace

    Hola

Currently I have 1 server with IIS for Gateway , 2 Server for Brokers vWorkspace and 1 Server RDS

By using vWorkspace connector from Windows I have no problem to connect to VMs or applications ( notepad for example). But since Linux only connection works VMs , applications show error "Failed TCP Connection "

also I have a Dell Wyse SUSE 5010 and the same thing happens to me .

Everything is mounted on Vmware

What could be the problem?

Thank you!

    NLA is enabled on the server RDSH?

  • Printing problem via an ERP application published on vWorkspace 8.0

    Hi all

    I am facing problem with the published ERP application. I'm trying to take the print then a bass line is missing on the printed page.

    Is there an option in the management console vWorkspace where we can change the print settings.

    If I change the printer (% of normal size to 95%) setting, then it works fine but it is a manual task on all printers so customer want a few settings on the published application.

    Pls see attached screenshot.

    Thank you

    Jean Claude

    This question is not respected at the time so no doubt is no longer relevant.

    If you are still experiencing a problem, please let us know.

  • PowerShell are tied for vWorkspace API for user sessions?

    In vWorkspace Management Console, you can view all users.  I'm looking for a match draw to this API (see image) to allow us to use powershell or another script that a user vWorkspace can run to unplug/disconnect their sessions...

    Is it still possible without returning to a PScript of Session/logoff Terminal Server that unfortunately is processing all vWorkspace TS not only.

    Hey sharifr,

    We currently do not support this through the PowerShell API. As you say, the best you can do directly queries the terminal Server farm.

    Using a combination of the cmdlet Get-QVWServer of vWorkspace and Get-TSSession module and Stop-TSSession of the PSTerminalServices module, you should be able to implement this feature. I realize there are some implications of permission using this method because the Terminal Server services cmdlets require high permissions to run. You can configure an end point PowerShell restricted services Terminal Server machines that prevented execution of anything except the two require orders of TS.

    That said, I'll make sure that this request to enter the road map. It is certainly something that we should support directly.

    PSTerminalServices

    http://archive.msdn.Microsoft.com/PSTerminalServices

    End points of constraint PowerShell

    http://blogs.technet.com/b/HeyScriptingGuy/archive/2012/07/27/an-introduction-to-PowerShell-Remoting-part-five-constrained-PowerShell-endpoints.aspx

    Adam

  • Problems installing powershell V3.0

    Hello people,

    I am facing problems during the installation of powershell version 3.0 on Windows 7 ultimate x 64 machine.

    It is throwing error like "update is not applicable to your.
    computer. "When I double click the file Windows6. 1 - KB2506143 - x 64.
    Have you checked there powershell V2.0 built into windows 7 and works as expected.

    Installing .NET framework 4.0 full, then reinstalled

    once rebooted machine.

    Have tried with .NET framework 4.5 full, still problem persists.

    tried under solution suggested on a forum:

    start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-

    KB2506143 - x 64 .cab through CMD

    IT returns the error like:

    Operation failed with 0 x 80070003

    The system cannot find the path specified

    I'm not able to determine exactly what goes wrong.

    Could somebody you please move in to help?

    Thank you

    You should post your question on the forum on TechNet:

    TechNet forums - Windows PowerShell

  • Problem installing Powershell 4.0 on Windows 7

    I have problems to install Powershell 4.0.

    OS: Windows 7 Professional SP1

    .NET: 4.5.1

    I also uninstalled .NET 4.5.1 and installed 4.5 and installed 4.0 MWF but always Powershell 4.0 is not installed. I also tried to start Powershell with the option-version 4, but it continues to tell me that this version is installed Word. MWF 4.0 is installed but not the component PS (there are also no error message).

    I have a log of blogs on the internet, but still I can not install version 4.0.

    Hello Keith,

    We appreciate your efforts on this issue.

    The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNetpublic.

    Please post your question in the TechNet Forum.

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itproperf&brandIgnore=true&sort=relevancedesc&searchTerm=PowerShell+4.0

    Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.

  • VSphere Orchestrator (vco) - problem to add a Powershell host

    Hello world

    I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.

    I followed this tutorial:

    http://blogs.technet.com/b/meamcs/archive/2012/02/25/how-to-force-WinRM-to-listen-interfaces-over-HTTPS.aspx

    I can connect with Powershell to a second server HTTPS but not with the vco...

    This is my setup:

    PS WSMan:\localhost\Client> winrm get winrm/config
Config
    MaxEnvelopeSizekb = 500
    MaxTimeoutms = 60000
    MaxBatchItems = 32000
    MaxProviderRequests = 4294967295
    Client
        NetworkDelayms = 5000
        URLPrefix = wsman
        AllowUnencrypted = true
        Auth
            Basic = true
            Digest = true
            Kerberos = true
            Negotiate = true
            Certificate = true
            CredSSP = false
        DefaultPorts
            HTTP = 5985
            HTTPS = 5986
        TrustedHosts
    Service
        RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
        MaxConcurrentOperations = 4294967295
        MaxConcurrentOperationsPerUser = 1500
        EnumerationTimeoutms = 240000
        MaxConnections = 300
        MaxPacketRetrievalTimeSeconds = 120
        AllowUnencrypted = true
        Auth
            Basic = true
            Kerberos = true
            Negotiate = true
            Certificate = false
            CredSSP = false
            CbtHardeningLevel = Relaxed
        DefaultPorts
            HTTP = 5985
            HTTPS = 5986
        IPv4Filter = *
        IPv6Filter = *
        EnableCompatibilityHttpListener = false
        EnableCompatibilityHttpsListener = false
        CertificateThumbprint
        AllowRemoteAccess = true
    Winrs
        AllowRemoteShellAccess = true
        IdleTimeout = 7200000
        MaxConcurrentUsers = 10
        MaxShellRunTime = 2147483647
        MaxProcessesPerShell = 25
        MaxMemoryPerShellMB = 1024
        MaxShellsPerUser = 30



    PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener
Listener
    Address = *
    Transport = HTTP
    Port = 5985
    Hostname
    Enabled = true
    URLPrefix = wsman
    CertificateThumbprint
    ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18


Listener
    Address = *
    Transport = HTTPS
    Port = 5986
    Hostname = host-vsphere.urbanvirtu.local
    Enabled = true
    URLPrefix = wsman
    CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628
    ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18

    If I try to connect from a second server via Kerberos with HTTPS it works:

    PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password
IdentifyResponse
    ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
    ProductVendor = Microsoft Corporation
    ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
    SecurityProfiles
        SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/
wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h
ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos

    But with the vco I:

    Name: test

    The Host/IP: Home - vsphere.urbanvirtu.local

    Port: 5986

    Type remote PowerShell: WinRM

    Transport protocol: HTTPS

    Authentication: Kerberos

    Session mode: A shared Session

    User name: administrator

    Password: password

    cap1.JPG

    cap2.JPG

    Someone has had this problem before? What I did wrong?

    Thanks in advance for your help.

    Best regards

    Jean

    Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.

    Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.

    This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.

    Would you please provide version of

    the PowerShell vCO plugin version

    PowerShell host - Windows Version

    PowerShell host - PowerShell version

  • Problem - add in plugin PowerShell PowerShell host

    Hello world.

    I want to run PS scripts locally on a host of the vCO.

    I have installed the components on it:

    1 WS 2008 R2

    2 vCO V5.1.0 build 2725

    3 PowerShell plugin V1.0.1

    4 WinRM V2.0

    5 PowerShell V2.0

    I configured WinRM by this command as an administrator:

    WinRM quickconfig

    WinRM set winrm/config/service/authentication @{basic = "true"}

    WinRM set winrm/config/service @{AllowUnencrypted = 'true'}

    WinRM set winrm/config/service/authentication @{basic = "true"}

    WinRM set winrm/config/client @{AllowUnencrypted = 'true'}

    WinRM set winrm/config/client @{TrustedHosts = "vco_host"}

    WinRM get winrm/config

    Config

    MaxEnvelopeSizekb = 150

    MaxTimeoutms 60000 =

    MaxBatchItems 32000 =

    MaxProviderRequests 4294967295 =

    Customer

    NetworkDelayms = 5000

    URLPrefix = wsman

    AllowUnencrypted = true

    AUTH

    Base = true

    Digest = true

    Kerberos = true

    Negotiate = true

    Certificate = true

    CredSSP = false

    DefaultPorts

    HTTP = 5985

    HTTPS = 5986

    TrustedHosts = 127.0.0.1, vco_host

    Service

    RootSDDL = O:NSG:BAD:P(A;;) GA; S:P(ALE;FA;GA;;;) (BA) WD) (AU; SA; GWGX; WD)

    MaxConcurrentOperations = 4294967295

    MaxConcurrentOperationsPerUser = 15

    EnumerationTimeoutms = 60000

    MaxConnections = 25

    MaxPacketRetrievalTimeSeconds = 120

    AllowUnencrypted = true

    AUTH

    Base = true

    Kerberos = true

    Negotiate = true

    Certificate = false

    CredSSP = false

    CbtHardeningLevel = relaxed

    DefaultPorts

    HTTP = 5985

    HTTPS = 5986

    IPv4Filter = *.

    IPv6Filter = *.

    EnableCompatibilityHttpListener = false

    EnableCompatibilityHttpsListener = false

    CertificateThumbprint

    WinRS

    AllowRemoteShellAccess = true

    IdleTimeout = 180000

    MaxConcurrentUsers = 5

    MaxShellRunTime = 2147483647

    MaxProcessesPerShell = 15

    MaxMemoryPerShellMB = 150

    MaxShellsPerUser = 5


    But when I want to add PowerShell host in PowerShell plugin I didn't do good. Nothing in the newspaper.

    I used HTTP, 5985, shared session and user session basis.

    Can someone help me please?

    Thank you.

    micy01

    Your log says: "Unable to load library 'vix'" - done-a you try to install the VERY OLD, obsolete plugin VIX on this host? If so, which causes all sorts of problems.

    1 it requires a basis of vCO Windows Server.

    2 If the initial configuration workflow is not running, it screws the other workflows

    3 If the library files are not unpacked in the correct on the vCO Windows Server folder, random questions appear throughout many parts of the vCO.

    It seems that you have:

    2013-10-23 15:40:27.219 + 0200 WARN [WorkflowHandler] error in the execution of the workflow 'add a PowerShell host '.

    java.lang.UnsatisfiedLinkError: cannot load library 'vix': Uvedeny modul nebyl nalezen.

    2013-10-23 16:46:49.511 + 0200 [performance] execution of workflow INFO ' copy to get virtual computers by name.

    2013-10-23 16:46:49.713 + 0200 WARN [WorkflowHandler] error in the execution of the workflow "copy to get the virtual computers by name.

    java.lang.NoClassDefFoundError: has not been initialized class com.vmware.vmo.plugin.vix.VixServer

    Remove the plugin VIX on your server and restart the Server Service of vCO. Your problems should go away

    Uninstall a plug-in for VMware vCenter Orchestrator

Maybe you are looking for