Problem installing Powershell 4.0 on Windows 7

Similar Questions

• Problems installing powershell V3.0

  Hello people,

  I am facing problems during the installation of powershell version 3.0 on Windows 7 ultimate x 64 machine.

  It is throwing error like "update is not applicable to your.
  computer. "When I double click the file Windows6. 1 - KB2506143 - x 64.
  Have you checked there powershell V2.0 built into windows 7 and works as expected.

  Installing .NET framework 4.0 full, then reinstalled

  once rebooted machine.

  Have tried with .NET framework 4.5 full, still problem persists.

  tried under solution suggested on a forum:

  start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-

  KB2506143 - x 64 .cab through CMD

  IT returns the error like:

  Operation failed with 0 x 80070003

  The system cannot find the path specified

  I'm not able to determine exactly what goes wrong.

  Could somebody you please move in to help?

  Thank you

  You should post your question on the forum on TechNet:

  TechNet forums - Windows PowerShell

• Problem install printer Lexmark Z730 in Windows 7

  Hello

  I have problems to install the software for my Lexmark Z730 printer in Windows 7.

  I contacted the Support technique Lexmark and they took control away from my computer and tried to install the software of the printer three times without success.  I was using a Lexmark level two Tech Support Technician after a technician level has no install the software of the printer, or lucky.  The technician two level Lexmark said it could be a problem with Windows 7 itself.  I use 32 bit Vista for Lexmark Z730 printer software.  I have a 32-bit version of Windows 7 Ultimate.  If someone knows this problem or can suggest something that I can do in Windows 7 to get the Lexmark Z730 printer software installed correctly it would be greatly appreciated.  Thank you very much in advance for your kind help.

  Hello

  I was able to solve the problem.  I'll share the fix of this problem because it can help someone else who has the same or similar problem.

  To install the software drivers Lexmark Z730

  Click Start
  Type msconfig and press ENTER.
  MSCONFIG window opens,
  On the services tab, click Hide all Microsoft services
  Then click on disable all the
  Search all lx * _device service and could if necessary
  Then click on the Startup tab
  Click on disable all the
  Then click on apply, then ok
  Restarting the PC is necessary
  After the restart, install the Lexmark software

  Hope this fix helps.

• Problems installing of printer in the Windows XP compatibility box

  I am trying to use my printer Canon MX870 Windows XP compatibility mode. In the compatibility window is my computer has no printer, and apparently no USB ports don't either.

  When I try to print from a program that is running in compatibility mode, I get an error box that says: no printer driver is installed.

  I found an MS article that says I should choose the Windows XP desktop tools > parameters command and check the printer in the menu of the integration features. I tried and found that printer is already checked.

  I tried to install a separate printer driver compatibility window and had no luck there either. The "Add a printer" Wizard has informed me that there is no plug-and-play printer connected to the computer. When I tried to install the printer manually, I found that none of my USB ports have been listed as locations.

  My computer has eight USB ports, an RS-232 port and a parallel port. The Wizard indicates that it is three parallel ports, 4 serial ports and seven ports 'TS' appointed TS001, TS002, etc., of which the last is "inactive".

  I don't know how to make the link between these imaginary ports of Windows XP for real hardware in my computer. (If I did, I would still need to know which one to use. I know, but Windows is supposed to automatically allocate the names of devices on the USB ports that is appropriate, in view of these problems, I am not prepared to assume that it will be).

  How can I handle this? All this seems to be a mess.

  Hello

  
  To work around the problem, try the following steps if you have this driver on the XP Mode desktop file.

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file you have on the desktop XP mode, then click OK. Now, check if the printer is correctly installed.

  You can even provide the driver through a disk file if you do not have internet access to download the file via the XP mode.

  Alternatively, you can check the link for more information below:

  
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://blogs.technet.com/b/windows_vpc/archive/2009/09/26/networking-and-using-Windows-XP-mode.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problems installing update PS CS5 new Windows 7 laptop w / prior to PS. already installed

  Hello

  When I got my new Windows 7 laptop, I tried loading on PSCS5, but given that it was a record of update and previous versions weren't there, it has not loaded. I finished my work for a trial period of 30 days on a sabatical recently, I uninstalled it and all the PS files except the recorded images and have now gone through the following process to try to load it:

  (1) 6.0 PS to a CD and serial number that I have - no problem

  (2) expenses PS CS2 on a CD and the nuimber series - I own no problem

  (3) charge of PSCS5 from a Update CD also bought, and got an error saying something about CS4 have to be uninstalled before CS4 could be loaded correctly.

  Curious because A: I never loaded CS4 and B: did not. So I uninstalled all possibly troubling to Adobe Flash Player, even files of Patch, but no ASA or Adobe Download Helper. Some files Adobe leaves behind, I deleted and emptied the Recycle Bin and rebooted more several times different. To my knowledge, my CS5 has been used on another computer. I have to disable on the other? I find it on a 3rd computer, but if it was just uninstalled without disabling, would I need to re - install for the deactivation of this feature on the 3rd. I hope someone can help me to say how many computers have CS5 activation.

  Now, I tried to simply load the disc of CS2 and will the PSCS5 and failed, so I re-did steps 1-3 after serving as Lightroom3 and DreamWeaver CS3, think about something from them might have been the culprit (however they previously loaded flawlessly after a deactivation of the DW function on another computer). This time, that Support Adobe area came upwards and after searching for the system or something else, said "no problem found", and I have to contact Adobe Support. Address no FAQ this problem and an analysis of the forums was not helpful. So here I am.

  Any ideas? If it is the lack of a registry entry, it would be useful to know exactly that which and how precisely is it and patch in Windows 7 for those of us who aren't geeks. I'm guessing that this might be a recurring problem and it would be useful to have this code for the patch, if known.

  Otherwise, I'm stuck using CS2, everything OK, no CS5.

  All of my Adobe products were purchased originally bought and activated by me.

  Thanks for any help,

  Michael J Kissane

  Jeff, et al..,.

  Oh, joy! Oh, frabjous ecstasy!  :-) (anyone remember the comic strip, Pogo?)

  PS 5 finally to load on my laptop after I followed the instructions of

  Maggie_8 message #3880631

  in which ignore you the first window, look for the configuration file in

  the directory of the CD and run right click options. Took one

  Try extra because of need to recognize the authority of the administrator, but

  then he took off. Asked for the serial number for PS5, gave, so

  did not find serial for prerequisites, but asked that after

  providing this (CS2), he was out of the race.

  Hats off to Maggie_8 and his brain dinner fish food. I eat fish 3 x one

  week, but it could have been a guy thing.

  -Mike

• Problem installing Age Of Mythology on Windows 7 (bridge)

  I just installed an old cd of Age of Mythology that my family got about 6 years ago. He jumped a program and I thought it would be fine, but when I started it, the graphics came not

  He blew me installing the layout bar thing. I wonder if I need to change the properties of the game, reinstall or try something different.

  Any suggestions?

  Hello

  As suggested by Chris.B, install the game in compatibility mode and check but before that I suggest you uninstall the game from the system. Follow the steps mentioned below.

  a. click on Start menu and type programs and features in the start search box and press ENTER.

  b. Locate the program in the list, and then right-click on it and uninstall it from the system.

  Once you have uninstalled the game, try and install the game in compatibility mode and check.

  For more information about program compatibility, see the article mentioned below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  To further support, I suggest you to post your query in the forums of Games for Windows and forum of Age of Mythology. Click on the link below.

  http://forums.gamesforwindows.com/

  Age of Mythology Forums:

  http://AOM.HeavenGames.com/cgi-bin/forums/display.cgi?action=CT&f=12, 27695, 10

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing of printer 1022n w / Windows 7 Enterprise

  My workplace has climbed to Windows 7 Enterprise (64-bit), and I'm currently not able to use my HP 1022n printer.

  I found the site to download the driver 1022n, but to halfway through the installation process I get an error message that the driver is not connected to a USB port on my computer. But it IS connected, and I tried all ports. (I also tried unplug, disconnect, turn off and then reconnect, reconnect and switch on everything.)

  The printer worked fine with my old computer, a 32-bit machine running XP and it is supposed to work correctly with Windows 7 64 - bit, too, but I'm stuck at this point.

  FYI, I use the HP1022n as a stand-alone printer, not through a network.

  I have run the HP tool and simply get the diagnosis that the printer is not installed.  I checked the printer spooler, too, which is started and set to automatic.

  Any advice would be appreciated.

  In 'other devices '.

  Rerun the update driver, but this time, click Browse my computer for driver software.

  Click on let me pick from a list of drivers for devices on my computer.

  Some printers > next

  Under manufacturer > choose HP

  Under printers > scroll down and select HP LaserJet 1020

  Click Yes in the warning popup

• Problem installing Visual Studio 2008 on Windows 7 x 64

  I am running windows 7 x 64 build 7100 and has difficulties to install visual studio 8. Setup fails when you install the prerequisite runtime

  It says (in red) installation impossible. The follwing component failed to install: DURATION of the prerequisites.
  The error log says ' pre-requisites DURATION: [2] error: Installation for the prerequisite Runtime component failure. MSI, returned the error 1603' code

  I searched the Internet and tried the compatibility mode and still the same result. I have a laptop running XP and he moved very well.

  Thank you

  Hi mjgukytuykuk,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to visual studio and would be better suited in the Visual Studio Forum. Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem installing HP Photosmart C4740 with windows 8, 1

  I just bought a new Dell PHE 8700 and it came with factory setting of windows 8.0. I've upgraded to 8.1 windows and when I went to my HP Photosmart C4740 of installation for some reason any it will not recognize the printer. I have used this printer with several different versions of windows in the past with no problems. I went through every available troubleshooting and still can not the PC to recognize the printer during the installation.

  The problem is resolved. It was a bad cable. Thanks for your response

• problem install printer lexmark Z600 on windows 8

  Have installation software cd when I try to install it says the software isn't in English, although he has listed in the languages English and when I try to install it returns to the previous screen.

  You can use the Vista driver for the z600 printer in Windows 8.

  Choose your model of z600 here:
  http://support.Lexmark.com/index?page=product&linkSelected=Node0

  Then download the Vista drivers for the correct type of bit - 32 or 64.

  To see if you have Windows 8 32-bit or 64-bit:

  1. press the key Windows + X, and then click System

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Problem installing vSphere Web Client on Windows 8.1

  Hello

  I want to install VMware vSphere Web Client on Windows 8.1 to connect to a server ESXi vShpere. But I get an error message stating "the product cannot be installed on Windows XP SP2 and higher.

  Well WIndows 8.1 is "WIndows XP SP2 that precedes" but its obviously not recognized as such.

  
  Question: does anyone have a solution to overcome this defective version of the installer check?

  cordially Edmond

  Nothing in particular. Just thought while I reinstall my client pc to install the last managementoption of the ESXi server. And I thought that to be the webclient service.

  Thanks for all the information. Super!

  cordially Edmond

• Problems installing Acrobat XI Pro on Windows 8

  I upgraded from Windows Acrobat X to XI of Acrobat Pro yesterday using the creative cloud. So I clicked the shortcut on my desktop to use it today and received a message that I have actually used a correct validation code, but the program is not on my machine! I use Windows 8. Can anyone help?

  If you go through the installation process for AA XI? For the CC, you may need to check the CC forum, since there are some differences on the installation of CC and CS for the standalone product.

• Problem installing Adobe DC Pro on Windows 7, 4 GB ram, 10 GB of space.

  Series no activation number accepted. Valid serial number from Adobe online dealer. The software seems to think that the serial number has been used before that is not the case. All previous editions of Adobe acrobat reader have been uninstalled.  Checked the registry and have confirmed the software has not been activated.  Suggestions?

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• I have a problem with access to the content windows install.

  When you try to install a downloaded Update (Mr. Fix - it of the current version of MS and ATT Communication Manager) windows install stops before finishing and gives an error meesage. I had some instructions on the BITS. Reg, but don't know what to do or where he is. HELP cannot use mt no tethering, no wifi at home aand sick of sitting in Starbucks coffee shops trying to solve this problem.

  Hello

  1. What is the exact error message you get?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Make sure that the Windows Installer service is running:

  The Windows Installer service can be disabled on the computer.  
   
  a. go to "Start "-> "run ", type "services.msc " and press the "Enter " key.
   
  b. double-click on the service named "Windows Installer ".
   
  c. check the value the "start type: " field. Is currently set to "Disabled ", then that's the problem. Change it by selecting 'Manual ' in the menu dropdown.

  Step 2:

  Follow all the steps in this article to resolve the problem.

  Problems installing and uninstalling programs on Windows computers

• problems installing Windows during the installation of adobe acrobat

  I tried to download Adobe Acrobat multiple times and it stops downloading saying that my "windows setup has a problem' and download needs to close?  Im not sure what is the windows installer.  Help, please!  I use vista 32 bit.

  Windows Installer - if you are unable to install programs in Windows, see the links below.

  Diagnose and resolve program install and uninstall problems automatically:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  How to use the System File Checker tool and the sfc/scannow to solve the lack or the system files corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833