vWorkspace Powershell - find logon failed

Similar Questions

• Could not find ' Logon Type: 2 ' has no field PC logon event

  We have hundred pieces of domain logon and on the domain controller audit policy has been activated as below.  But the windows event log, I can't find an interactive logon failure (ID = 4625 and logon type = 2).

  Audit account logon events - success/failure
  Account - success/failure of the audit management
  Component directory service access - check failed
  Audit logon events - success/failure
  Audit access to the - success/failure
  Audit policy change - success/failure
  Use of the privilege--failure to audit
  Audit system events - success/failure
  Treatment follow-up - no verification audit

  When I try to check the logon failed myself in the local event viewer, I found that it is n/a in respect of the security.

  

  Any idea on this?  Is my journal of bad criteria for filtering or any changes to the system requirements?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to report your query in the TechNet forums to get appropriate response of experts familiar with this topic.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cannot install Microsoft FixitCenter because the powershell download always fails!

  Download powershell from Windows xp

  Cannot install Microsoft FixitCenter because the powershell download always fails!

  Hello

  ·         Microsoft Fix it have you trying to run?

  ·         Is the question comes up with all this problem?

  For more specialized issues of Fixit assistance please post your query to Microsoft fix it Center forums:

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

• the user profile Service service has no logon failed to load the user profile

  I received the following message when I try and log in my account to have:

  The user profile Service service has no logon failed to load the user profile

  What are my options?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Log: error message: "the service user profile service has no logon failed to load the user profile.

  Error message: "the service user profile service has no logon failed to load the user profile.

  Unable to connect.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Group Policy client service logon failed

  Tried to log on to the administrator account. Access denied. No access to my files.

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  If you are getting political group customer service logon failed access denied error then it could be related to administrator approval or if its parameters to get damaged.

  I suggest you see the below thread and see if it helps you to solve the problem.

  the Group Policy client service does not have logon

  The Customer Service of group policy does not logon, access is denied.

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Logon fails due to invalid login credentials

  Hello
  
  I get the following error only when I export, I'm trying to connect to Essbase. However, when I browse to target the mapping, I'm able to do. Worm 11.1.1.3 adapter ES11X-G4-E
  
  
  ERROR:
  Code............................................. 10403
  Description... Proceedings of Essbase API: Code [EsbLogin] cast: 1051293-1051293 - [Wed Jan 20 13:56:41 2010] Local / / / Error (1051293)
  
  Logon fails due to invalid login credentials
  Online: 128
  
  
  I tried with a few different Admin accounts, and I get the same error. All the thoughts/solutions?
  Thanks in advance.

  Hello

  Unfortunately for mapping navigation is not always a valid test. Some products that integrate the FDM with have what is called a "Dimension Cache" that are not active connections on the target system.

  You need to know what UserName/Password, you send to Essbase and test directly within Essbase for validity.

  First: -------------------------------------------
  Check the profiles of Machine in the FDM Workbench. If a name of user and password is defined in any profiles Machine is a global session opening and this information wrinkles too all and is passed to Essbase.

  Second: ----------------------------------------
  Check the settings and Application integration. They have what we call the "logon method" and "Global connection information" make sure logon method is set to unified if set to global then the connection information overall is passed to Essbase.

  Third: ---------------------------------------------
  If none of the above are true, then the user information is passed to Essbase.

  You want to make sure the configuration that you use in the order above and test appropriately.

  Hope this helps...

• Create new user appears to work, but do not create a profile or a directory, logon fails

  Connections for existing accounts will continue to work.  But no new account create via the Control Panel does not work.  The Control Panel accepts the name of the new account, allows me to change the icon for the account, allows me to set the password for the account, watch the account on the list of accounts to manage.  But the name of the account is not anywhere in the registry and no directory is created in C:\Users.  When we try to log on to the new account, we get "the user profile Service has no logon.  User profile cannot be loaded. »

  See if it helps:

  Fix for Vista: the user profile service service has no logon. User profile cannot be loaded
  http://Rob.Brooks-Bilson.com/index.cfm/2009/1/5/fix-for-vistas-the-user-profile-service-service-failed-the-logon-user-profile-cannot-be-loaded

• Windows logon fails when network drive mapping

  I can no longer map a network drive of my laptop Vista business to my PC (XP).   I enter a username/password valid name, but I still not unsuccessful logon.   I read a gazillion discussions and have made the change to the recommended without result SECPOL tool.

  What makes me mad, it's this used to work!   I recently had to physically move the PC (renovation of the kitchen) and perhaps its something stupid like a missed connection.  Yet, I have access to the internet very well.  I can ping 192.168.0.3 192.168.0. * I'm confused comment.3 is affected. My tivo est.4 and I tested this connection and that's fine.

  I even had a network printer set up works very well: Photosmart \\192.168.0.3\HP...

  The only area involved is WORKGROUP.   I created an account "lapguest" on the PC specifically for this purpose

  I forget some syntax?   The GUI said essentially the same thing.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * / USER: WORKGROUP\lapguest
  Type the password for \\192.168.0.3\pcc:
  86 the system error occurred.

  The specified network password is not correct.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * /USER:\\192.168.0.3\lapguest
  Type the password for \\192.168.0.3\pcc:
  The context of the user provided is not valid.

  More help is available by typing NET HELPMSG 3775.

  I think its something stupid, I forgot, but he is elusive.     I also put the name of the computer in the 192.168.0.3 place, but it does not help.  There is no involved DNS.

  Using the graphical interface, I can browse the network to find the folder to add, but there is nothing under the computer name of the computer.  "pcname" is not a valid host name.   Otherwise download "logon unsuccessful".   I tested the connection on the PC and it is certainly true.

  In addition, I traced \\192.168.0.3\C$ successfully, but I got my LOCAL drive (portable) C.   ????  that should be a big clue, but call me clueless...

  I even uninstalled mcafee (completely) just in case.  did ' t like it anyway so no biggie.

  I know that there is a big DUH when this has been resolved.

  Thanks Aaron, but I think I did it to her.

  In the meantime, I decided to try sharing in the opposite direction.   Which made me respond finally that est.1 which est.2 whos.3.   A lot of listening to ipconfig.     What etait.3.2 is the last time.  (the est.2 PC and computer laptop est.3)  I still want to understand how these numbers are assigned.

  I found the option - rr in my earlier review, but do not know if he had an impact.   Also reluctantly, I created an account with the same name on both systems to try.   First of all, I shared with who.    Later, I could share by using the account name that exists on the PC (lapguest).

  I don't really know how the problem etait.2 et.3 mixup questions and/or syntax (file specification must be \\192.168.0.2\share-name) spec not \\PCNAME\share-name and the user must be PCNAME\username) and/or services and windows XP/VISTA problems.  Maybe my new sequence got something instantiated later.   Hope it sticks, whatever it is.   I wrote my orders exactly.  I hope that when I reboot or whether, I not have this problem again.

  Ah-ah... before you sign this note, I went to test the laptop via the network printer I had previously put in place of a printed page.  It did not work.  I can't see why.  the specifications of the printer is Photosmart \\192.168.0.3\HP... which was fine before, but now it faudrait.2.  I'll have to add another printer network for the new address.  I hope I remember how to do this.

  Now, I can clearly see the benefits of DNS.  Is there a simple way to create a name "servername" instead of having to depend on 192.168.0.n?

• On vWorkspace Powershell problem

  Hello

  I use the Get-QVWFarm command in PowerShell, but return FarmName field is empty. I try to change

  FarmName in CB and it does not work. Can someone give me advice? THX

  If you have run

  Connect-QVWFarm-farm "vWorkspace database"

  I have a feeling that I had the same problem and the farm name only gets put after you connect for the first time. However, you also don't use the name of the farm, but the alias here to following orders, for example the beginning of one of my monitoring scripts is:

  import-module vWorkspace
  Connect-QVWFarm-farm "vWorkspace database"
  $problem_computers = get-QVWComputer-farm "vWorkspace Database" - Filter {$QVWComputer.Status.LogonState - not ' connected' - and $QVWComputer.Status.LogonState - not "logged out" - and $QVWComputer.Status.LogonState - don't 'LoggedOff"}

• VWorkspace PowerShell Module for 8.5?

  After the upgrade to vWorkspace 8.5 I can no longer use the PowerShell Module. I get an error when you run Connect-QVWFarm that the version of database should not. Any idea when will be released the update of Powershell 8.5?

  Hello

  The Powershell 8.5 module is now available!

  http://en.community.Dell.com/TechCenter/virtualization/vWorkspace/b/vWorkspace-blog/archive/2015/06/01/Dell-Wyse-vWorkspace-8-5-PowerShell-module

  Thank you

  Sam

• Administrator logon failed

  I have been using professional Windows for more than a year now. I am logged in as administrator. Very recently, my logon password just stopped working do not know why. The following appeared when I connect with my usual passoword; "the user profile Service has no log on." User profile cannot be loaded. "What should I do?

  It's microsofts advice - https://support.microsoft.com/kb/947215?wa=wsignin1.0(also see - http://windows.microsoft.com/en-au/windows/fix-corrupted-user-profile#1TC=windows-7 ( ) 

  Method of recovering sevenforums - http://www.sevenforums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  The sevenforums system restore - http://www.sevenforums.com/tutorials/700-system-restore.html

  Safe mode Admin of sevenforums - account http://www.sevenforums.com/tutorials/102552-built-administrator-enable-winre.html

  Have you tried a restore to a date before the problem occurred?

  Or see if any of the links above will help you.

  (Sorry, there is a lot to read & take care with any regedit and double check AND if possible backup the registry and all important data first).

• How to find the failed connection attempts at 'check' session is enabled

  How to find the unsuccessful connection attempt to dba_audit_trail when the "audit logon" is enabled.

  Filter your query against dba_audit_trail action_name = 'CONNECTION' with returncode! = 0 (returncode = 0 means that there are no errors - successful connection attempts)

• Firefox (40.0.3) finds but fails to hand off the files bit torrent to Utorrent (3.4.5 - build 41202)... suggestions?

  I use Chrome for find and UTorrent to download files torrent bit through my regular internet service.

  I use Firefox to find and UTorrent to download torrent files bit through my internet VPN service by proxy.

  Both browsers are excellent to find the files I'm looking for (usually the TPB) and wen I click on the button 'Get this Torrent', both browsers view 2 pages related with UTorrent.

  With Chrome, the target file is quickly "given" to UTorrent and download is performed as expected

  With Firefox, however, the target file is NEVER 'delivered' to UTorrent (I waited an hour just to be sure, it wasn't an incredibly slow process). I've recently upgraded to Firefox 40.0.3 and never had this problem before this upgrade.

  Your suggestions and advice is required... Please be gentle, I'm sure that most of you have already figured out I'm not in the category 'exceptionally skilled user '. I appreciate your time and consideeration.

  Concerning

  gparrott

  First, re - install the torrent program. Make sure that the installer
  takes care of file associations.

  Now, check the screen shoot.

• Computer Dell laptop/windows xp, got virus.tried to fix. BAD IDEA. ERROR: DLL msgina.dll UI winlogon.exe - bad image.logon failed to load.

  Computer Dell laptop of my husband has a virus that wants you to install a fake security program. I tried to fix it. OOPS. I tried to choose an earlier date to restore your computer to and I got zapped, crashed and burned. Error is now: winlogon.exe - bad image then the msgina.dll login user interface DLL failed to load, contact admin to replace the dll or restore the original dll. I don't have a boot cd. Is there a way of "back door" to get his computer works again?

  As you know now, do a restore of the system on a severely infected machine is not a good thing. Better to save the data and do a clean installation of Windows. You can try to do it yourself, but based on your post, which I would not recommend it. I don't mean to hurt your feelings, just to be practical. It would be better to take the machine to a competent local tech (not a type of BigComputerStore/GeekSquad of the place).

  If you really want to try it yourself, here's what you need to do:

  1. start the computer with Linux Livecd such as Knoppix. You are using Linux, copy the data files on an external hard drive.
  2. install Windows using the XP Dell installation CD.
  3. install all the drivers for Dell. Use the Dell Resource CD or get the drivers from the Dell advance website.
  4. switch to XP Service Pack 3 and do all the Windows updates.
  5. install a good antivirus - NOD32 (commercial), Avast or Avira (both have free versions).
  6. install all other desired programs, updated if necessary (especially if you have MS Office).
  7. analyze data saved with the antivirus before you copy it to the new clean install. MS - MVP - Elephant Boy computers - don't panic!