Once again the model regions

Similar Questions

• Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.

  Download driver printer Epson Stylus CX4800, etc., last nite... today do not have access to the printer... Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.  What can I do to get this printer permanently replaced on the acceptable list of printers or if I should buy a new printer!  This has been a problem for almost 2 weeks now... What can I do? Every time that you add the printer to the list as soon as I turn off the PC, the printer is removed from the list of Windows! Is this a defect of the windows program I or is this printer is no longer one that windows will recognize?

  Help!

  Hello

  "Every time that you add to the list"

  We do not do anything.

  It is not Microsoft.

  These are public Forums set up by Microsoft on their servers and animated by them.

  We are mainly Windows users help each other here.

  Here is the link to Epson to the latest drivers for your printer model.

  Choose the appropriate operating system from the Menu drop-down.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=58606&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_VISTA-32

  And a Troubleshooting Guide for it.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=58606

  See you soon.

• Mail is stuck in a loop, force quit/restart it closes, and then when I opened the Mail once again, the cycle starts over.

  I am El Capitan OS X 10.11.3, Mail is stuck in a loop, I was responding to a message, and I tried to send it. Now, he presents this message, and then switch to another message / desktop /, mail inbox home screen, then the loops again.   Force quit and restart it closes, then when I open the Mail once again, the cycle starts over.

  I can't use the mail app at all.

  Open the menu go with down option - Open Library - containers and move the folder "com.apple.mail" on the desktop.

  Restart your Mac and check if it works very well.

• I have been using Dreamweaver CS6 on my old laptop broke. When I tried to load cs6 once again, the installer for adobe dreamweaver cc on my computer. I can not activate dreamweaver with my dreamweaver cs6 serial number. What should I do?

  I have been using Dreamweaver CS6 on my old laptop broke. When I tried to load cs6 once again, the installer for adobe dreamweaver cc on my computer. I can not activate dreamweaver with my dreamweaver cs6 serial number. What should I do?

  Uninstall it and then use the cleaning tool too.

  Adobe Creative Suite cleanup tool
  ---------------------------------

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  Then download the CS6 licensed software and install and activate with your serial number.

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• My mce has been in windowed mode with a 16:9 aspect ratio and I watched a video well 4:3, I've narrowed the window for a while, then when I opened the window once again the window was a 4:3 aspect with the 4:3 video

  It retains this operation and I tried to reconfigure my monitor, but that does not help him I had this problem so that my operating system vista 64 died and had to bereloaded and then it was new right, but now he's screwing, once again, is very frustrating as my mce used fing my hd channels (my tuner is a tuner Digital hd hauppauge2250)

  Hello DanC08,

  Your issue is with Windows Media Center, I suggest that ask you your question at thegreenbutton.com/forums.
  It is a Microsoft site and deals only with problems of Windows Media Center.

  Click here for a link to the message.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Return multiple values at once of the listOfValues region

  Friends,
  
  I created a (listOfValues) region that has 4 fields/columns
  
  ResponsibilityName, ResponsibilityId, ApplicationName, ApplicationId
  
  I assigned a responsibility field ResponsibilityName of the listOfValues in a page.
  
  It works fine when I select a value in this LOV. It returns a value to the field of 'Responsibility' of the page.
  
  Is it possible to return the other 3 fields so while selecting ResponsibilityName in LOV. for example while you select a value for the field 'Responsibility', can the LOV return ResponsibilityId LOV to the 'ResponsibilityId' field in the page, at the same time?
  
  1 selection can return values 1 to the fields?

  You can return multiple values in the LOV. Simply create a result to the mapping of the array element Lov to the basic element of page. Once you select a value from the LOV, the element of basic page could get filled in with the value on the table of lov whereby it has been mapped.

  Concerning
  Sumit

• This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit

  Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.

  I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.

  When you try to install Norton Ghost again, I get this:

  

  I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.

  I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.

  Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.

  Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?

  
  My question basically goes like this:

  How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!

  Any help appreciated!

  -Ingvar

  OK, I found the solution:

  Error 1935 resolved

  Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.

  Ghost 15 is now installed and you can register and use it.

  Problem is, there is a current cancellation, who will run the next time you want to install (all) application.

  Delete these registry keys:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  and

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress\Rollback

  Now, everything should be good, at least it looks so here!

  Detective Conan.

  -Ingvar

• Once again the problems with Adobe DPS

  Had several problems in the past to "log" in with the manufacturer of Folio. After a large NUMBER of FACILITIES it finally worked fine.

  But now, I wasn't even able to open the Folio Builder Panel or Panel overlay creator. Nothing happens if I choose it from the menu...

  Therefore, I have installed the new update:
  1. the digital editing tools
  2. the separate Folio Builder Panel

  Unfortunately it didn't always work.
  Installed everything again. Does not work. Cannot open the panels.

  As you can see in the screenshot, the Folio Builder Panel is called '% menu_name' in the menu. HMMMMMM...?

  SOMEONE HAS ALSO THIS BUG? TO WHOM THIS IS A SOLUTION?
  I have a calendar very hard to finish a presentation for the iPad...

  

  I FOUND THE SOLUTION:

  I had no right to the "CS5ServiceManager" folder in my user library.
  Fixed the rights in all subfolders.

  Now it works!
  Best, marc

• How can I show once again the object library?

  Should be an easy question, but surprisingly I can't find it using Adobe.  In LiveCycle Designer 8.2, I accidentally closed the window on the right object library and can not find a way to show it again.

  What should I do?

  Should be in fact - in the window menu or SHIFT - F12.

• Once again the value of the Time Machine

  I did install clean and fresh for the new OS El Capitan, erasing any ssd drive, where I imported all the data external Yosemite Backup by usb drive.

  I used the airport Time Capsule for 2 years in Yosemite and now I want to connect to El capitan, but I wonder if I lost inside TC previous data.

  My field of application must Add new backup of El Capitan, keeping the previous Time Capsule content (of course if there is free space!)

  This may occur for use transport CANADA data if I forgot import specific data.

  How can I join TC El Capitan please? Suggestions?

  Your original (from Yosemite) backups for the past two years are still on your time capsule to the sparsebundle disk image.  You have done a clean install of OS X El Capitan and retrieved the data and the settings you wanted from your Time Machine backup.  What you need to do is then open Time Machine preferences and choose "select disk" - and re - select your Time Capsule.  A new backup will start (and it will be a full backup) - but it will not overwrite your original historical backups of Yosemite - they will remain separate within the sparsebundle.  A quick glance-, it may seem like they are gone - but Time Machine will show you only the backups for the latest version of Mac OS X by default.  You can 'Browse other backup disks' hold down the option key when you click the Time Machine icon in the menu bar.  If you need to restore your whole machine to Yosemite or to a point before installing El Capitan - the "Time Machine backup restore" option in the recovery partition will allow you to review and select the old backups of Yosemite.

  To "do" to ensure that your time capsule is not running out of space.  If space is low - there is a risk of Time Machine, remove older backups.

  If you believe that there is a lack of disk space on the time capsule - another option would be to create a new folder in the root of the time Capsule and name it "old backups.  Drag the sparsebundle existing in the new folder.  The move operation must be almost instantaneous.  Time Machine will no longer see the sparsebundle and will not attempt to clean or to crush it.  When the next backup run - it will create a new image of sparsebundle containing a full backup to the root of the time Capsule.  You can always restore (if necessary) of the sparsebundle you have hidden in the folder "old backups.

  A third option (if disk space is very limited) would be to move the sparsebundle existing in the folder "Old backups" and allow Time Machine to create a new sparsebundle.  At the same time - you can copy the old sparsebundle to another drive somewhere - and then delete it from the time Capsule to free up space.

  ~ Scott

• Once again: the Horizontal alignment in HFM

  Hello

  I want to align a field of custom in a Horizontal Manager button

  Definition of the HFM

  final HorizontalFieldManager _navigation = new HorizontalFieldManager(HorizontalFieldManager.NO_VERTICAL_SCROLL | HorizontalFieldManager.FIELD_VCENTER | Field.USE_ALL_WIDTH)
  {
       protected void paint(Graphics graphics)
       {
           graphics.setGlobalAlpha(100);
  
           int[] xInds = new int[]{0, getExtent().width, getExtent().width, 0};
           int[] yInds = new int[]{0, 0, getExtent().height, getExtent().height};
           final int[] cols = new int[]{Color.WHITE, Color.WHITE, color_computacenter_light_blue, color_computacenter_light_blue};
  
           graphics.drawShadedFilledPath(xInds, yInds, null, cols, null);
           super.paint(graphics);
       }
       protected void sublayout(int maxWidth, int maxHeight)
          {
              super.sublayout(maxWidth, maxHeight);
              setExtent(maxWidth, navigation_vertical_manager_height);
          }
  };
  

  Custom field (partial)

  public class NavigationButton extends Field
  {
          private String label;
          Bitmap img;
          int horizontalPadding = 4;
          int verticalPadding = 10;
          static int height;
          static int weight;
          ToolTip _tooltip;
  
          public NavigationButton(String name, Bitmap img)
          {
              label = name;
              this.img = img;
              this.height = img.getHeight() + 4;
              this.weight = img.getWidth()  + 2;
          }
  
          public NavigationButton(String name, Bitmap img, long style)
          {
              super(style);
              label = name;
              this.img = img;
              this.height = img.getHeight() + 4;
              this.weight = img.getWidth()  + 2;
          }
  
          protected void layout(int maxWidth, int maxHeight)
          {
              setExtent(maxWidth, maxHeight);
              // setExtent(Math.min(weight, maxWidth), Math.min(height, maxHeight));
          }
  

  [...]

  Any ideas what I am doing wrong?

  Thank you!

  Thank you! The grid layout manager works very well, as you can see in my new assignment * g

• Once again the plugin and not charging

  I have a new asus x 200 and me do the battery plugged in, not charging issue. I know that the solution is to remove the battery and discharge the power, but this laptop is not an external way to remove the battery. Is there another way to solve this problem?

  Hello ScottTravares,

  Battery not charging is a hardware problem. Windows will not charge the battery.

  As your laptop is new, I would say that you either contact the Asus support or take over the laptop in the store, he bought at and ask them to take a look. The store will no doubt facilities to check the connection of the battery for the defects.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Once again the partial triggers

  Hi all
  
  I am very new to J2EE and ADF, and the design of a web page in which there are a few areas of input text and a two tables on Oracle JDeveloper and ADF 11 g. I implemented partial triggers on the table and a box of text giving the reference to one buttons and define this same button as partialSubmit = 'true '.
  
  However when I press the command button that refreshes the table, I noticed that all the text entry boxes, menu Bar call it accessor functions Set the bean managed as well as the table is refreshed.
  I read the lifecycle JSF, and ADF but I'm still not clear as to why all values are preparing or in short, the part of the life cycle when the partialSubmit is set to true and I hope that the table and the input text box should be defined or a part of the life cycle.
  
  I'm going wrong anywhere.
  
  Any help would be much appreciated.
  
  Thanking you,
  
  Rohit

  Dear Sir

  This is normal behavior, all the setters will be drawn, but it dosent means that it is an update of the entire page.
  refer
  Done PartialSubmit = PPR means really real?

  Published by: in the line of fire on August 16, 2011 09:23

• Once again the variables

  I went to this for weeks. I have this:
  
  public void checkOut(event:Event):void {}
  var tempStr:String = "";
  for (var i: int = 0; i < cartAryCol.length; i ++) {}
  tempStr is tempStr + cartAryCol . PNUM5W + "\n";
  Alert.Show ("Are you sure?", tempStr);
  gotoURL();
  }
  }
  
  It works perfectly collects the PNUM5W (article numbers) and show me in one alert. I want items sent to another function. Like this:
  
  public void gotoURL(): void {}
  
  var url: String = ("" http://www.youngsmarket.com/list.cfm ");
  var variables: URLVariables = new URLVariables();
  variables. ItemId = tempStr;
  var request: URLRequest = new URLRequest (url);
  Request.Data = variables;
  try {}
  navigateToURL (request, 'Main');
  }
  {} catch (error)
  handle the error here
  }
  }
  
  The URL ends with a value null- http://www.youngsmarket.com?itemid=null
  
  I think this should be easy. Someone can tell me what Im doing wrong, or has an example.
  
  Thank you
  George

  Tracy,
  Your Incredable; you have saved me so many times. It is slowly sinking.

  G.

• By default the camera and the model to publish

  Hey,.

  I am in a room with the console of the room.

  Then I select "Default caméra" in the 'Flow' tab and click 'configure '.
  Now, I choose "Viewer (10) ' as 'Model to publish' and save with 'OK '.

  When I click on "Set up" once again the model 'release' is set to ' Owner (100).

  Can you tell me whats wrong maybe?

  What I want to achieve is that the visitors with 10 role can send their webcam.

  Thank you.

  Hello

  Thank you for this comment. There was a bug in the user interface of our side to show Owner (100) while it is Viewer (10) and vice versa as you pop - the audio Configuration dialog box / camera.

  This is why you will see if you switch from an Owner (100) Publisher (50) or Viewer (10) Publisher (50), the user interface works very well.

  The good news is, it was only a bug of display of the user interface, for example if you select access or publish the model to a value, let's say owner, the role will be in fact to the owner. Only when you open the new dialog box display will be wrong.

  I fixed it and there is an SDK to update very soon and will be attached to that. Until then, you can ignore the question of the user interface.

  Thank you for this comment.

  Concerning

  Hironmay Basu