Once disabled signature

Similar Questions

• How can I disable signature "sent from my iwatch?

  How can I disable signature "sent from my iwatch?

  Hi Matt

  On your iPhone, in the application of the watch, go to: My Watch (tab) > E-mail:

  -Under e-mail settings, tap Signature (sent from my Apple Watch);

  -On the next screen, tap on the end of the current signature.

  -Remove the signature using the keyboard to go back / delete key (replace with another signature if you wish, or simply leave the field blank).

  -Once finished, press the arrow to the left to the upper-left corner of the screen (")<>

  The changes will be synchronized automatically to your Apple Watch.

• Interfaces reset when disable signature.

  Hi guys.

  When I have the following script penetration in order to disable the signature, the cisco Ips 4240 interfaces are restart, anyone has any clue is so extrange just for the deactivation of a signature?

  end of config

  Service signature-definition sig0

  signatures 9202 0

  status

  fake license

  output

  output

  13 August 23:59:35.229: % LINEPROTO-5-UPDOWN: Line protocol Interface GigabitEthernet1/0/25, changed State to

  13 August 23:59:35.280: % LINEPROTO-5-UPDOWN: Line protocol Interface GigabitEthernet2/0/26, changed State to

  GigabitEthernet1/0/25 is up, line protocol is up (connected)

  Equipment is Gigabit Ethernet, the address is e8b7.4843.b099 (bia e8b7.4843.b099)

  Description: * IPS - A *.

  GigabitEthernet1/0/26 is up, line protocol is up (connected)

  Equipment is Gigabit Ethernet, the address is e8b7.4843.b09a (bia e8b7.4843.b09a)

  Description: * IPS - B *.

  Tahnk you.

  Check the attached picture. It may be useful:

  

• Microsoft has even once disabled my operating system and call me a thief

  They are criminal when the

  Hi Charlessss,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, your system is disabled. I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change important before the show?
  2. What is the complete error message you get?
  3. When you get this error message of deactivation?

  You must activate Windows within 30 days of installation. Activation helps verify that Windows on your computer is genuine and has not been used on more computers than the Microsoft software license agreement. In this way, activation helps avoid software counterfeiting. For more information, see activation of Windows 7: frequently asked questions.

  If Windows 7 is installed on your computer, and you cannot activate it then please follow the suggestions described in the following article to activate it.

  Activate Windows on this computer

  For more details, you can refer to the below article mentioned.

  Get help from Microsoft Windows activation

  Hope that helps, get back to us with the current state of your question and we will be happy to help you.

  Kind regards

• Accessories blackBerry Smartphones will not open - once disable BES but before activation of BES

  Hi, having used the new storm 9530 for a week, I was very pleased of the device, after a minor learning curve. Technology guy at work told me that if I wanted to work Email above, I would need to follow the procedures to connect to our company BES. After that, I found that 90% of the new feature I was enjoying after retiring from my old phone had been locked due to the restrictions of security company BES. A colleague informed me that the storm didn't need BES to get our Email, it would work perfectly well connect via web e-mail service outlook, it seemed to be enjoying all of the new benefits as well as to obtain Corp.... Email and all I could do was get Corp. by e-mail. So I asked my storm is off of the BES and return to its previous state, HE said no problem and after a short delay, my quickly erased storm itself and all my data then restarted and I had to start. Once more, I found that I could take advantage of the robust features, but I could not open parts attachments of any kind to any form of electronic message, be it Google or outlook web access, PDF, png, gif or whatever it is. It seems that whenever I try to open the attachments, the storm downloads the file, then gives me "request more cannot be completed. Service book information not found ". Now, I have had no problems to see the PDF files or PNG images before the adventure of BES, but now I can't. I tried the trick of removing battery without success, and I sincerely believe that the purchase of a plugin datavis is a terrible solution, since the small fortune I paid for the device must be able to look at an image attachment. Someone at - it the wise advice to get this fixed, I love this phone, but this debilitating load is really making my storm a disappointment. Thanks in advance for any help, I can find it here. FYI, this is the latest OS 4.7.0.76.

  See you soon.

  OK... next steps

  1) from your home screen

  Options > Advanced Options > host Routing Table > BBKey > sign up now

  You should receive a message that you are activated.

  (2) from a PC, connect to your carriers BIS site:

  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

  (3) from inside BIS, push your service books:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&SLIC...

  An alternative to 2 & 3 is to call your operator and ask them to remove the service books that.

• When I try to compose a message, the signature area disaapears and allow me to type a msg. It works very well in Internet Exp.

  I use the workspace of godaddy.com. Apparently, there is a setting that is biased since I can't compose an email on this particular computer. Everything works fine on my laptop and iphone. Once I click on to reply or compose an email, once the signature of disapperars, I'm unable to type anything anywhere.
  A I mentioned earlier, everything works in internet explore.
  a few weeks back, I installed one of your modules 'ad block. Would that be a problem? If so, how do I remove it?

  If you have installed Adblock Plus, then you can click the icon to check if it blocks the content on the current page.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  If that doesn't work in Firefox Safe mode then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Can we keep direct action buttons after a signature has been added to a form?

  I have a form with several action buttons... Print, save money, submit (by e-mail), disable this form. However, when the signature is applied to the shape, all these buttons become unusable. Is it possible to keep them alive once the signature has been added to the PDF file?

  Thank you.

  Thanks for the quick response. Just after the announcement of my question, I noticed the possibility of excluding specific items of reading only when the signature field is signed. Nevertheless, thank you very much for getting back to me.

• Is it possible that someone from Apple can activate my IPhone 5 c, when the lock screen, says "disabled: connect to iTunes?

  So I changed my password, took a NAP, and when I woke up, I couldn't remember the password. So now, my phone says "disabled: connect to iTunes '. Is it possible that someone from Apple can activate my phone (preferably without restoring to the factory)?

  Once disabled, it cannot be re-enabled in the restaurant if you plant.

  An Apple Store can do for you. but you can also just connect to a computer running iTunes and do it yourself.

  No matter how you do it, it will be restored.

• Common practice in the Signature Tuning

  Hello

  I wonder if anyone know or recommend, what signatures to tune in when a customer asks to signature tuning. There are approximately 3000 + signatures, so that we start with, and is there a common/best practices for tuning of signature.

  Appreciate your expertise.

  Mike

  Mike, I wish that I had an easy answer for you, but like most things in life it takes hard work.

  Signature development is something that should happen after an analysis of the event.

  You can start by choosing your heavy weight and looking at why these events are fireing.

  Ask yourself, are these events that I want to see? Are they REAL intrusions of are they false positivies? Are they usable?

  You can then disable signatures that provide no value to you, put down the severity of those that you can not do anything to the subject but still want to know (for example scanning for example) and to build filters for guests you know trigger signatures that you want to keep active (as if you were running a scanner vulneribility in your network).

  After the time you would have all of the signatures and filters that fit the environment, in that the probe has been placed.

  It is hard work and you must watch your packet captures to see what is happening, but it's how signatures are tuned.

  -Bob

• Retirement of signatures

  Hello

  How the Signature IPS development team to determine when a signature is obsolete? Is there still a reason for the United Nations - a signature that has been defined as retirement through the application of a package of retirement signature update?

  Mark,

  An obsolete signature is usually the result of a new GIS who just. Lets say that there is 1 signature that looks for the event. BU then comes with 2 signature that looks for the event A or event B (usually has a variant of the event) or with signature #3 who has more eficient way to find A event. They thus decided to obsolete Signature #1.

  Also, there is no real reason for UN-retirement retirement signature. Retirement of signatures are usually signatures to pull a lot of false positives and generate a lot of noise.

  Here's what the documentation says about it:

  Obsolete

  The signature team Cisco uses the obsolete field indicate obsolete, old signatures that have been replaced by newer, better signatures, and to indicate the disabled signatures in an engine when an instance of this engine better is available.

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_signature_engines.html#wp1013828

  I hope that answers your questions.

  Have fun

  Raga

• Table multi-selection disabled the check boxes in ADF 10 g

  I think I met an obstacle when you work with a multi-selection table in 10 ADF.

  The selection itself works very well. However, my problem is to try to disable some of these boxes several selections. These boxes are disabled using the expression language. Once disabled, I can always choose these rows in the table using the button 'Select all' created by multiple selection facet. On the page sent, the disabled lines are not recognized as being selected, which is good. However, they always seem to be selected on the front-end server, which would be confusing for users.

  <af:table emptyText="No roles were found"
            binding="#{backing_userRoles.tableRoles}"
            id="tableRoles"
            value="#{backing_userRoles.userRoleList}"
            var="userRole">
                          <f:facet name="actions">
                            <af:commandButton text="Copy Roles"
                                              binding="#{backing_userRoles.cmdCopy}"
                                              id="cmdCopy"
                                              action="#{backing_userRoles.cmdCopy_action}"/>
                          </f:facet>
                          <f:facet name="selection">
                            <af:tableSelectMany text="Select items and ..."
                                                binding="#{backing_userRoles.tableSelectMany1}"
                                                id="tableSelectMany1"
                                                rendered="#{backing_userRoles.managerFlag}"
                                                disabled="#{userRole.role.autoGrantedFlag eq 'Y'}"/>
                          </f:facet>
  

  

  So as you can see, the disabled check box has been selected even when disabled. Any ideas on how to change this behavior? Or maybe just get rid of the default generated 'select all ' | 'Select none' orders?

  Thank you

  Cody

  Or, remove selection facet and make sure you have a selection logic - that is to say, some transient Boolean attribute of VO enabled/disabled state, and you have Select All/Select none

• How a user can lock a PDF form once it is completed?

  I thought that it was an option in Acrobat XI where once the signature field has been filled, you can choose the fields that would lock. I can't find anything like this in ms. I'm creating a form of application, and I want to lock in the information of the applicant when they sign, but leave some open fields that our office provides information on presentation.

  The problem is that you have the form put in place as a form of E-Sign, not a regular AcroForm. Alexander discussed a digital signature field, but you're dealing with signature fields are used with Adobe Document Cloud services eSign. So how you proceed depends on what types of signatures you need.

• Acrobat XI unlock verified signatures

  We use an external signature (Signature Gem) buffer to have patients sign documents that exist in their electronic cards. Once the signature buffer has been used, the diagram is locked.  We are no longer able to add, modify or delete any element of the array.  We are using Acrobat Standard XI.  How can I change this setting so that we can use the external signature stamp and continue editing the graph?  Thank you!

  A digital signature can be locked. It seems that your signature. Do you get the dialogue of 'Sign' of the standard Acrobat, like this (this one is from Acrobat DC, but in Acrobat XI is similar):

  

  If you do, then look at the box "lock after signing the Document. If it is checked, then the created signature will be locked. Clear this check box. If you do not get this dialog box when the signature, dialogue which, if any, get you? It is possible that the software behind your created signature signature buffer forces must be blocked. In this case, you should ask the provider signature stamp for instructions.

  The other possibility is that your PDF estcertifie and certification authorities do not permit the actions you want to apply. But in this case you would not be able to perform these actions before you sign, which is not the case according to your description.

• How can I disable site tablet

  I designed a Site Office, Tablet and Mobile site.  The Tablet site load on any laptop and seems silly.

  (How) A remedy or (B) disable the tablet site

  Hello

  (A) Please delete the browser cookies and then try to visit the site. If she still open the shelf layout on laptop please share the URL of the site so that we can test it at our end.

  (B) to turn off tablet site please go to the following location and uncheck "desktop Redirection. Here is how to find this option:

  File > Site Properties > Layout > Tablet

  

  Once disabled, Reupload the site on the server and it will turn off Tablet development.

  Concerning

  Vivek

• the package xpi, error "corrupt".

  I downloaded the FireFTP add-on
  https://addons.Mozilla.org/en-us/Firefox/addon/FireFTP/

  But I hate the icon ugly blue seahorse in the toolbar. So, I have extracted the xpi, replaced the .ico to png files and., then repackaged it as as (first as zip, then renamed zip xpi). I only did the content in the top folder too, to clarify.

  I get this error attached. Would appreciate help. Thank you.

  You disable signature extension application in Firefox 41? Because the extension likely repackaging would invalidate the signature, and maybe it's the sense of the message.

  But I don't think that I have encountered this problem in older versions of Firefox. The solution was to drag parts on the file extension and let the software Zip kick him out. I don't remember which Zip software I was using at the time.