My delay of mouse every time that the computer is something different
I click on something and then the computer freeze for a few seconds then he contiues on the process.
2. What are the changes of hardware or software that are performed on the computer before the question?
Please follow the links below to solve the problem.
Method 1
If the issue does not occur in safe mode then continue troubleshooting conflicts with third-party software.
Note: Please follow the instructions under "How to configure Windows to use a normal start State", to start the computer in normal mode once the necessary troubleshooting is complete.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
See, http://support.microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab0
Step 2
Run Chkdsk on the Windows partition
Open an administrative command prompt window.
CHKDSK Volume: / f/r
Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
See also,
Refer, the links listed below for more information
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=bEO-QPUiwuZ
Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/en-us
Tags: Windows
Similar Questions
-
original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth
Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.
Very frustrated Ruth
Hello
Try the steps below to solve the problem.
Caution:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
(a) open the registry editor and navigate to:
HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced
(b) save the key in a file. See the article of support upward.
(c) the value of Start_ShowRecentDocs as a result.
(d) value of 0 - list of my documents most recently opened is disabled
Value 2 - list my most recently open documents is enabledNote: set the value to 2.
-
Launch of the program in an entire window every time that the computer starts caching
Problem is that I have the program launch Cache in a full window every time that the computer starts. Stupid! It should start only in the system tray. Imagine every other startup program starts in a full window from the start. Is not acceptable. Also, I had disable the security function in the control panel of Windows 7, which allows the programs to make changes to the computer or leave it in a message box whenever he throws. Fuck that person nothing told me on this software is so much in need. In a chat online SanDisk said it's just the way it was designed.
You can choose to not launch the application at windows startup ("do not start with windows" option). The caching engine still works without the GUI app.
-
I was struck by a virus hiding all my files and slowed down my right to the computer. Ive got everything, but because the virus struck, Vista must update every time it stops. Looking at the history of the update, the "update for Microsoft Silverlight (KB2526954)" update failed to install. Ive also had problems with ATI Catalyst Control Centre doesn't opens and downloads via Firefox does not open because the temporary file could not be found. Scanned with 4 types of anti virus, anti-malware and anti-spyware. Any ideas?
Hi NF108,
Follow the troubleshooting steps in this thread about the problem with the installation of the update Siverlight.
Let us know if that helps.
-
I can't see more than about 10 pages without firefox crashing. I tried to use firefox in safe mode and it seems to work very well, but without stuff like ABP and my greasemonkey scripts, I feel that I work in the stone age. It started right after I've updated Windows, my video driver and adobe... I updated to the latest version of firefox subsequently assuming the bug was an incompatibility problem and found that did not fix my problem. In addition, he could have started before that I've updated things, it's just when I noticed the problem
Thanks for any help.
(1) would you try to disable graphics hardware acceleration? As this feature has been added to Firefox, it has gradually improved, but there are still some problems.
You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Orange Firefox button or classic menu Tools > Options > advanced
In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.
(2) try to disable the new Flash 11.3, protected mode of since this feature is currently being debugged. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?
-
I hate this F * KIN bing pop up at the bottom of the MSN.com page and you want to permanently delete it, not just 'close' every time that the page is re-open. I have Windows 7 and would like to know how to do it. I'm not familiar with how to change the script or procedure to do. I Ad Block more and do not know what line of 'block' in filters. Help!
I use Firefox 21.0 and like MSN.com (except the cursed bing pop up) as home page.
The site requires cookies to store your preferences. If you accept cookies from msn.com, then the search bar disappears for good after clicking on the link close [x] .
If you want to block the search bar in Adblock Plus, put the following filter group "My masking Rules.
msn.com##div#ls1[class="co4b2 cf co coa2 coc1 m3 ls1"]
-
My computer is not picking up my Western digital portable storage drive do, the computer knows something is there, but does not appear in the con i.
Is detected in management records or computer?
The laptop works on another PC?
-
MyRIO_problem have to deploy every time that the device is not
Hello
I just want to ask u MyRIO.After that I deployed MyRIO program. I can run.
Went however that I power off the power supply and that the former program cannot run. I have to deploy the program again.So, how to run the program without deploying the program. That mean that eating IT the MyRIO, the program runs continuously. (no need to redownload the program).
Maybe you can help with that.
TQconcerning
LouisHi Louis,.
Try to build an executable application of the RT VI using the specification build and configure the application to run in real time to run at startup. Then the executable would automatically be stat up when myRIO boots.
-
DVD Maker changes every time that the file extensions?
Original title: dvd & movie maker whats up with these different files?
I download my video and saves it to a WMV file... then I edit in movie maker and he recorded as wmv, but at other times like a MSWMM file... then I try to publish it in movie maker and it records in a file wmv or sometimes msdvd... why he spends it saves and how this affects the burn process?... it will say 1 file could not be found many times... How can I get these two working smoothly? I have a 32 bit vista
HelloWhen you have finished working on a project, you can publish the project as a film. A film is a Windows Media file with a .wmv file name extension or file Audio-Video Interleaved (AVI) with an .avi file name extension.Project Windows Movie Maker has an .mswmm file extension. For example, myProject.mswmm and the film has a .wmv or .avi file extension. For example Mymovie.WMV or Mymovie.avi.Changes made to the file extension depending on the actions that you perform in Windows Movie Maker. Change file extensions should not affect the burning process unless the creation of DVD does not support the file format. If the file is not found, it means that the file type is not supported by DVD Maker.For your reference:
1. see work with projects in Windows Movie Maker
2. see publish a movie in Windows Movie Maker
3. see burn a DVD-video disc
4. see problems with creating a DVD-video using Windows DVD creationVisit our Microsoft answers feedback Forum and let us know what you think. -
Even after the removal of the string "count to five: a 2 3 4.» 5."since the control of the chain and its replacement by another string, the original string returns after that the VI has been saved then reopened. Whence this string of data? I have attached a copy of the library feature. In my application, I was able to work around the problem by replacing the chain with a constant string control. But I'm still curious to know what is happening.
Thank you
ChuckChuck,
Chain drive was scheduled by default with the string you see. To change it, enter the new string, right-click on the control and select
Operations on the data > default font of the current value
Now, save your vi.
-
I can't install adobe creative cloud app on my new Mac Pro desktop.
When I download the app and try to install it, adobe says that the application has been damaged, then starts all over again.
What can I do to fix this?
joke
Try to perform the steps mentioned on link below
"Failed to install" error Creative Cloud Desktop application
-
How can I get the computer to record while I'm typing in it?
Hello
· What application you are using to save data?
You must manually save the file you are working on using the key CTRL + S.
However, if you use any office 2007 or applications later we have auto save option.
Note: AutoRecover or AutoSave does not replace the Save command. You must use the Save command to save your document at regular intervals and when you have finished working on it.
ASR is effective for unplanned interruptions, such as a breakdown or accident. AutoRecover files are not designed to be saved when a logoff is scheduled or a normal shutdown occurs.
-
On the Open of ZTE, the music player "Shuffle all" failed the first time, pressed, instead, it will just load a song at random and read the rest of the list in the order; It's not until I click "Shuffle all" and back again it will play in fact mixed. Is this a bug? All solutions?
Hello
Yes, I think that it is a known bug in Firefox OS v1.0. Bug 883781.
The bug is marked as resolved in Firefox OS v1.1. Once that ZTE full update to version 1.1 the bug on your device.
version 1.1 of Firefox OS was officially released yesterday. If all goes well, it won't be too long before it reaches the Open of ZTE. See here for more details:
I hope this helps.
-
IaaS distributed installation error every time that the server 2012R2
I've tried literally all on google and even some things that not relate when you try to resolve this problem... but basically install fails to half way through and this is the part of newspaper where starts the error: someone has any ideas? There are no firewall anywhere. The database is created on the server whenever I run the present. Each pre - req is installed, everything appears in the auditor of pre - req.
News: 2015-02-09 02 50 13 182 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" MoveRegistrationDataToDB - file name "C:\Program Files (x 86) \VMware\vCAC\Server\Model" s "dbvraiaasprd" d "vcac" - v
News: 2015-02-09 02 50 17 385 PM: command completed successfully.
News: 2015-02-09 02 50 17 PM 401: registration with the service catalog
News: 2015-02-09 02 50 17 PM 401: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InitializeRepo Target.
News: 2015-02-09 02 50 17 PM 401: build succeeded.
News: 2015-02-09 02 50 17 PM 401: 0 warning (s)
News: 2015-02-09 02 50 17 PM 401: error (s) 0
News: 2015-02-09 02 50 17 PM 401: time 00:00:27.36
News: 2015-02-09 02 50 17 416 PM: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml" /t:InstallRepoModel /p:RepoUtilDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data '; AssemblyDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data" /p:DBServer = "dbvraiaasprd"; DBName = 'vcac"/p:DBConnectParam =" "/p:InstallType = 'Install'"
News: 2015-02-09 02 50 17 432 PM: version of Microsoft (R) Build Engine 4.0.30319.34209
News: 2015-02-09 02 50 17 432 PM: [Microsoft .NET Framework, version 4.0.30319.34209]
News: 2015-02-09 02 50 17 432 PM: Copyright (C) Microsoft Corporation. All rights reserved.
News: 2015-02-09 02 50 17 PM 448: Build started on 09/02/2015 14:50:17.
News: 2015-02-09 02 50 17 463 PM: project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml "on node 1 (Target InstallRepoModel.
News: 2015-02-09 02 50 17 463 PM: InstallRepoModel:
News: 2015-02-09 02 50 17 463 PM: #InstallRepoModel # install repository models
News: 2015-02-09 02 50 17 PM 479: "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe" Assembly-SqlInstall - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Common.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.External.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Licensing.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.Common.dll. , "C:\Program Files (x 86) (x 86) \VMware\vCAC\Server\Model \VMware\vCAC\Server\Model" s - dbvraiaasprd d 'vcac' - crush - v
News: 2015-02-09 02 50 33 089 PM: command completed.
News: 2015-02-09 02 50 34 729 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" model-Install - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll" s "dbvraiaasprd" d "vcac" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v
News: 2015-02-09 02 51 42 513 PM: System.Net.WebException: the underlying connection was closed: the connection was closed unexpectedly.
News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.BatchSaveResult.BatchRequest)
News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)
News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)
News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)
News: 2015-02-09 02 51 42 513 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)
News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)
News: 2015-02-09 02 51 42 513 PM: Warning: return nonzero code. The command failed.
News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.
News: 2015-02-09 02 51 42 559 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.
News: 2015-02-09 02 51 42 559 PM: Build FAILED.
News: 2015-02-09 02 51 42 559 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->
News: 2015-02-09 02 51 42 559 PM:(InstallRepoModel target)-->
News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.
News: 2015-02-09 02 51 42 PM 591: 0 warning (s)
News: 2015-02-09 02 51 42 PM 591: 1 error (s)
News: 2015-02-09 02 51 42 591 PM: time 00:01:25.12
For all of you who read this, I was able to solve the problem.
Through all the blogs I read, I did sort of a stupid Setup 4.5.2 on server 2012R2 error. DON'T, DON'T.
To uninstall the 4.5.2 version of server 2012R2 if you install like I did, go to programs and features, switch view installed updates and remove the update for Windows KB2934520
After doing this, I was able to smooth sailing through the installation. I realized that halfway through my troubleshooting, but considering the compatibility of .net usually I don't think it would be a huge problem and I though that surely there would be a vmware KB on such a stupid mistake but apparently not.
-
My locks of Apple Watch every time that the screen turns off.
From the past week, whenever my screen goes black on the Apple Watch, it crashes. Whenever I want to check messages, use siri or do anything outside the eye at the moment, so I have to unlock it with my access code. It's pretty boring.
Hello
Check your settings.
- On your iPhone, in the application of the watch, go to: My Watch (tab) > General > enable the detection of wrist.
- On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake > turn the Wake screen on wrist lift.
Also, make sure you wear your watch sufficiently well adjusted. If worn too loosely, your watch may believe that he had been removed from your wrist. With access code also allowed, it would then automatically locks. Performance of the sensor can also be affected by temporary changes or permanent on your skin, such as certain wrist tattoos.
If you have not already done so, it can help to upgrade your iPhone and look at the latest version of the software, from your iPhone:
- Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
- Update the software on your Apple Watch - Apple Support
More information:
Maybe you are looking for
-
Upgrade HP p7-1110 for Ivy Bridge CPU (Pentium G2030)
Hello, everyone. Someone please tell me if I can replace the CPU for HP P7 - 1110 with a Pentium G2030 Ivy bridge? The motherboard is known as IPISB-CU (Carmel2). Thank you for your help.
-
Satellite L300 - 29 X - just freezes when using certain programs installed
I have already restored the factory settings but it freezes just after 5 minutes of being on and try to use any application it word or a Web page. Help, please
-
Can someone explain in simple terms of pedestrians how do I clear my cache on Windows XP?
I'm trying to update a submission to arXiv, but on-screen arXiv watch this update even if I know it's there - my computer obviously draws its information from its cache or somewhere instead of updated information on arXiv. I had this problem before a
-
Error C:\windows\swmsmca.dll
When starting my laptop I get this error code - error C:\windows\swmsmca.dll---j'ai ran all kinds of different things to try to fix this issue and it always keeps popping up. Anyone has any ideas on what to do?
-
Having a problem in DateFormat when the time zone is changed...
Hi, the following code converts a Date string to a Date which I am able to successfully... The problem I am facing is when I put the Moble zone as the format of Casablance (GMT) and my Format for a Date string is "2009-09-27 03:02:00:00 of" "" then I