Once I ran tool to remove unwanted files from Advanced System Care I can't run all the apps windows 8.

Similar Questions

• How to remove unwanted files from the local root folder of the site?

  Hello

  I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

  Any help or ideas will be of course very appreciated, thanks, dluthier

  I guess you mean 'work' files, not the images that you use in your Web site.

  If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

  In my way of working, I have a folder for each client that includes:

  • The correspondence of this client folder
  • Folder to 'Work'... the PNG images, etc., or of the images from the client
  • Record the site root

  When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

  Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

  That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

  To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

  On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

  If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

  Who will save you from actually having to 'write' file names!

  Z

• How to remove unwanted plugins (and no I don't want to read all the articles unrelated who never answer your question)?

  I want to erase the unwanted plugins in Fire Fox. A plugin has even a warning about its use does not (Java Deployment Toolkit). But every time I ask 'how to remove a plugin?', I get redirected to an article that does not answer the question. And then the cycle starts again without ever actually answer the question.

  IT IS NECESSARY TO UNINSTALL FIREFOX TO DELETE A PLUGIN?

  Hello 4646tm, I understand your frustration. Here's how to remove a plugin:
  Click the menu and then click on Add ons, which looks like a piece of a puzzle.

      Type about:plugins into the Location bar and press Enter to display the About Plugins page.
     Each entry in the About Plugins page will have "File:" and "Path:", showing the name and location of the plugin file. Use Windows Explorer to navigate to the folder shown for the plugin you want to remove.
     Rename the file to add an X in front of the filename (for instance, npswf32 becomes Xnpswf32).
  

  You said that you do not want links, but I'll give you a couple just in case you do not want to uninstall the plugins manually. These links are to pages that tell you how to run the uninstall it please do not hesitate to tell me if you think that they are not useful.

  Uninstall Adobe Flash - Windows

  Uninstall QuickTime - Windows Vista/7

  Follow the instructions:
  Download Microsoft Silverlight (instructions to uninstall also)

  I just put a couple of the most common out there, if you have a specific plugin you don't want it please tell me and I can dig to the top of the page for it, also you can do manual uninstall I gave you.

  Have a great day!

  Jon

• I can't run all the files on my computer it shows either a spyware or malware has infected my computer

  I can't access any of my files on my computer anymore and I saw some pop on my screen that my HDD has damaged cluster and the RAM memory is extremely low... I do not remember to do anything on my computer to cause this problem, so I've read things about her and figure that maybe it's a malware o spyware but still I can not understand a thing about this and how to solve this problem, I was also wondering if I could still access my old files if I get my system working again... Thank you for any response I can get from this post... It would be a great help :)

  Hello

  What is the exact error that you receive when trying to open any file?

  Step 1: Virus or malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 2: Check the problem in safe mode and after the same return.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• How to remove a file from a site

  I have an unwanted file in my site. How can I remove it?

  Select file in the files (F8) Panel.  Select display Local or a remote server (in the office where the unwanted file).  Press the DELETE key.

  Nancy O.

• How to remove unnecessary files from my mac computer?

  HW to remove unnecessary files from my computer without following these instructions

  MacKeeper Human inside

  Results of the analysis of your Mac arrived. The State of your system is: seriously MacKeeper found in: 327 items The amount of junk mail on your Mac is: 507 bytes

  5 cleaning Elements 1 security Elements Optimization 0 Elements

  Activate MacKeeper

  We strongly recommend that set you all the found items. Otherwise, you may experience:

  5 cleaning items 1 security features Low because of unnecessary files disk space Theft of personal data: user names, passwords. credit card

  Already set free: 321 items.

  Activate MacKeeper

  Best regards Constantin Your Apple certified Technical support engineer 1 (888) 572-5876 1 (800) 462-715 0 (808) 189-1280 This e-mail has been sent to *. Please add [email protected] to your address book to ensure our emails reach your Inbox.

  
  If you prefer not receiving news from us, here is the link to unsubscribe.
  To change your communication preferences, use this link. Kromtech Alliance Corp., Richmodstrasse 6, 50667 Cologne, Germany Privacy policy

  Remove MacKeeper rather - we know junkware that will try to entice you to pay money, the company has had several lawsuits against it for their business practices.

  http://AppleInsider.com/articles/15/08/10/MacKeeper-to-pay-out-2m-in-proposed-CL ass-action-regulation

  Ignore it and delete the app. Where you get/download MacKeeper?

• Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

  I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• How to remove unused files from my account site live hotmail?

  original title: unused files

  How to remove unused files from my account site live hotmail?

  The question you have posted is bound using Windows Live (hotmail) and would be better suited to the Windows Live Help Solution . Please visit this link to find a community that will provide the support you want.

• How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

  I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

  Hi mango127,

  I suggest that you give all permissions for everyone on this folder and check if it works.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

• I can't delete my temporary files from the drive clean, I can't defragment all the c drive, what is my problem

  When I defragment it says that some files can not be defragmented, it said that it defragmate can't all drive c, when I do a disk clean up it only cleans and removes temporary internet files, empties the Recycle bin and compress old files. It dosnt take off web pages offline 9 k or 3 temporary files, 696 KB, or 32 KB of the temp of client/web publisher files.

  He used to do that before but not now and my computing needs a drive clean and defragment all the time more often when im doing something on my computer, it really goes slugish and plays and I have to close and clean the disk and defrag all too but its all just do not do the job.it has just started to do this what I can do to solve the problem.

  Thank you

  Margaret Cox.

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  This will ensure that your system is clean.

  What is your OS and service pack, current antivirus, make and model of the pc?

  Once the scans have been executed and the system is clean, we can optimize your pc:

  Stanley Zhang tips

   

  Will probably want to clean this machine...

   

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• I can't open all the files on my pc

  I can't open all the files on my pc. I get a pop up that says windows can not the path of the device spec acess or file.you possibly not authorized to acess the element

  See If trojan remover help. Install the update / click scan. Then select all the options under the Tools menu to reset everything. If this does not in the normal windows try safe mode / networking (restart press / hold down F8). Then select the

• Error #2041: File that a single browsing session can be performed at the time

  Hello
  I posted this question before, but so far he went unanswered. I would appreciate any help on this:
  
  My application allows user to do two loads of single or multiple files. There are buttons for each type. Whether you tap on an instance of the FileReference or FileReference class is created.
  
  It works fine only would be - this one type of successive additions: only of files only single or multiple files. BUT every time that I go from one type to another (I start downloading single files and then press the button to download several ones) I get the following error:
  
  Error #2041: The file that a single browsing session can be performed at the time.
  
  How close or delete file browsing sessions? The complete event doesn't do much of anything on this topic.
  
  Thank you very much.

  Hi Temudzin,

  Thanks for your suggestion and thanks for looking into this... It works the way you suggested. However after some troubleshooting I discovered that you can do the single and multiple downloads without having to charge the flash.

  First of all, once you start download again (or several), you must create a new instance of the class appropriate download (FileReference or FileReferenceList respectively). You will need to make sure that when the downloaded files are complete do you this null instance. This command removes the browsing sessions open.

  With the class instance done upload null the next time that you want to download something, you're basically starting from scratch - and that's why you create a new instance of with any new attempt to download download.

  This is necessary only if you're allowing users to either single or multiple downloads at the same time. If you stick to a single type of downloads (single file or multiple files at any time) you can simply declare the instance of class once and do not need to make null at the end of the download process.

  OK, take care and thank you.

  m.

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.