one of the three conditions, return true

Similar Questions

• Puzzled - one of the three videos will not play

  Hello! I have trouble getting one of the three that lists Flash (swf) video to play. 3 all play very well locally (swf files and html pages via a browser and window when tested in Flash), but we'll not play once uploaded to the server (Network Solutions). Loads of skin (Controller), but not the video itself – link: http://tripartners.com/Pages/NWDLS/NWDLS_Video_2011/Session1/NWDLS_Session1_Part2.html all 3 went through the exact same process at the same time. As the video plays well locally, and because I re-processed the capricious video over and over again to eliminate the error on my part, I am totally stumped.

  Thank you very much for any assistance you can provide.

  See things, fix its video 2/3 which is the problem?

  I'm using a web debugging tool called Fiddler, and he shows me the URLS of the videos you upload. For the 2nd video, it seems abnormally long, as if you entered it incorrectly. It may have nothing to do with the way that you encoded - video is on the place where he is, or where your Flash file "tent" to locate.

  Video of 2 URL:

  http://tripartners.com/users/judithleslie/1_Websites/TRI_NWDLS/TRI_NWDLS/Web-content/pages /NWDLS/NWDLS_Video_2011/Session1/NWDLS%20Session%201%20Part%202%20of%203.flv

  Also, I got recommned not to use spaces in your file names - instead, use an underscore ('_').

  So I would say that you check the location of your video on your server and then to be sure it's the right URL that you use when the definition that you use only the video for the FLVPlayBack component.

• Does resettlement as one of the three licenses with the Windows 7 Family Pack Upgrade?

  I have installed without problem on two computers and you want to install on a third computer in the future after having finished building.

  If I have reinstall it on one of the first two computers will I have troubles installing on the third?

  How to keep track of how many times I've used this upgrade Microsoft?  Is it connected to the key that has the earlier version of Windows?  So I use the same three keys of Windows XP update will work even if I need to reinstall?

  No, because this is the same computer, so it works very well. Unused facilities / additional licenses will not be exhausted.

• HA error on one of the three hosts

  Hello

  I have set up a cluster with three servers and active HA.  Two servers work fine, however, one of the servers (esx1) has an error saying HA 'agent on esx1 cluster in MCC MCC has an error.  I checked the logs and looks esx1 determines that esx3 is the main agent, but it is impossible to connect to it so that it determines that there is no agent that runs on esx3.

  I made sure that I could ping esx1 esx3 and I can't.  I also made sure it solves with the short name and the FULL domain name, and it does.  Not sure why it cannot connect... ideas?  The log is attached.

  When the full domain name is configured properly, sometimes I just uninstall vpxa issues ESX host, disconnect & remove then add it to your cluster.

  VMware newbie...

  Zen Systems Sdn Bhd

  www.no-x.org

• How can I validate a form if at least one of the three text fields is selected

  Hi all

  My form has many fields but 3 text fields here that I need to have the Viewer to enter text in a text field before hitting the submit button.

  Don't know how to do in this regard.

  Thank you

  Courier says:

  I can't understand how to ensure at least a field is selected by the Viewer on the three text fields, any thoughts?

  Yes, I played a bit with this idea earlier today, but got distracted by other things.

  What follows is based on the following:

  • There is only one form on the page
  • No validation is involved
  • Each of these fields in the group that needs at least a field has "data-req1" (without the quotes) in its opening tag

  For example, if you have a form like this:

  Name:

  E-mail:

  Phone:

  Add the following just before the closing on the page tag:

  If you try to send the form without find out the name or the email field, you will get an alert dialog box and will refuse to submit the form. But if one or the other or both fields have values, the form will appear.

  In other words, it will work with any number of fields that have "data-req1" in the opening tag. So much that one of these fields has value, submits the form.

• Home computer connected to the network request username and pass on only one of the three computers.

  I got my wife connected to my home network running Windows Media Center on Windows 7 laptop and it could be accessed by all computers on my home network. I replaced the laptop of the woman with a new laptop which has Windows 7. During the installation of Windows 7, it automatically set to join my home network. Now all but one of my other computers can access files/folders on the new laptop without a user name or password. But when I try to access the new laptop from pc it ask me a username and password. I never put in place of user names with password on all computers. I can go in the new laptop and send files and public folders from the pc of one of the problems, but not the reverse. Someone has an idea how I can fix this where it is not regarding the username and password on this computer?

  Hello

  Sorry for the late reply.

   

  Method 1
  I suggest you to follow the suggestion of Gloria replied on June 16, 2009 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/cannot-turn-off-or-disable-password-protected/a3e4f6cb-FBDF-4F15-bb93-38cbf6fac833

   

  Method 2
  You can read the article.
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

   

  Method 3
  Temporary disabling of security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  See also:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• Unable to process several files on one of the three catalogs

  After having adjusted to get my catalogs in order, what I did, I encountered another problem. I have three catalogues one for people, one for things and I give the floor to work where I try which is new to me, so I do not ruin my main catalogues.

  I straightened the files in my catalog of things. I have a category which contains images of the pages of the book of autographs from the end of the 1800s. These analyses were conducted in JPEG some time ago. I tried to use several treatment to change these 55 images in psd in the original file to be consistent with the rest of the catalogue. Whenever the process fails.

  In order to see what could be the problem I have copied the file category in two of my other catalogs and were able to process the file category itself as a psd. I also created another small file in the catalog of things and tried to convert and had the same result. The box of warning information that appears when the copy in the same file indicates that the original files will be overwritten. Psd files do not overwrite the jpg files. They are added to the original file. Maybe it's the way it is supposed to be. This isn't a real problem.

  The real question is why I can't deal with multiple files in the original catalogue. I looked at the file of errors and, although I don't know a lot about most of it, I found the following in the first part of the file.

  Exception crash = "EXCEPTION_ACCESS_VIOLATION.

  I run XP SP3 and PSE 8. I am a user who has administrator rights. I don't find any mention of an authorization filter in the PSE 8 program.

  I'm stuck until I solve this problem and I need help is done. Any suggestion or information will be greatly appreciated.

  Post edited by: Minocq

  One thing to try: instead of using 'treat multiple files', you can use the 'export' function in the Organizer to export JPEG images in this category to the psd format into a new folder?

• Suddenly I can't receive emails from a particular address on one of the three e-mail accounts that I have on Thunderbird.

  These emails come from a non-response address, and I get quite a number on a daily basis, so I was wondering if Thunderbird has a sort of virus protection that prevents me to receive. They won't in the junk mail folders or spam folders. I checked with HER on the Web site that sends these emails, and they said that everything was going well at their end. It shows emails through. However, I could not receive even their test sent from their account message no answer. BUT when they sent from another account, it came through fine. So the problem seems to be with my receipt of messages from addresses no answer. This began to happen on December 14.

  I thought maybe it's something in my antivirus software, which is something called Symantec Endpoint Protection (provided by my employer), so I tried also the implementation of all the email accounts three on another computer. This serves as my Thunderbird email software but has another antivirus (Avast free) program, but I'm having the same problem.

  Finally, I tried bypassing Thunderbird by accessing my three email accounts from the web. Still not received the mails no reply. Would it be to say that Firefox is also involved?

  Obviously, * something * on both my think computers these emails 'no response' are spam or virus even. (Yet, I get spam every day a lot of other sites, go figure!) The only thing that the two computers have in common is Thunderbird and Firefox. The computer, I tap on the Windows XP Home with service pack 3 rums. The other computer running Windows7 Home.

  My last effort would move to Outlook from M$, and I really don't want to do that! Can anyone of you offer any help? I'm sorry that I'm not a geek and cannot re - program anything, but I will try very hard to understand what you're saying.

  Thank you in advance.

  Susan

  It is between the sender and your Inbox. That's all you can say. Your provider should be able to track your account and see if the message comes from their server.

  Thunderbird is a software email client. It runs on your computer and helps you manage your e-mail. It can not download messages that do not in your Inbox on your server vendors.

• one of the three internal hard drives slowing down

  Everything was perfectly fine, I have three internal hard work led in may Mac pro early 2008, 10.10.5 yosemite OSX, 32 GB of ram, 128 GB SSD boot drive, a hitachi 1 TB and a 2 TB WD I bought 3 months ago. Suddenly a week ago that my 2 TB WD started working slowly, reading and writing time is too long for small amounts of data. Folder icons take the time of loading, and even if this isn't my boot drive, but its cause my very slow closing system. Other drives work perfectly well. I tried to repair the two partitions via disk utility, but nothing helped. The problem is that I can not change my project pro Prime Minister because that all files associated with the project are lying in this same WD drive files cache for After Effects and Premier Pro causing these applications run slowly. I'm working on a feature film project any help would be appreciated.

  Thank you

  Probably the drive is a failure. When a disc is a failure it should read data multiple times to get a free reading of the error. That really slows thinks down I will quickly copy the data to another disk

• Is it possible to migrate an application and drop one of the three types of plans?

  Migrating applications is 11.1.1.3 to 11.1.2.2.300.  Try to migrate an application and a company wants to only 2 of the 3 types of regime to be brought back.  Is there a way to do this?  Or to remove or hide the type of 11.1.2.2.300 if all 3 are migrated on?

  Here is what has been tried, but he cuased a problem in the DB:

  • Migrate an existing application that originally had 3 types of plan. Plan dropped type 1 and kept plan types 2 and 3
  • Created 2 types of plan when creating the application in 11.1.2.2
  • Initially built the contour using 11.1.1.3 LCM export dimensions and had to modify the XML to import. Edited plan 2 and made this plan type 1. Edited plan 3 and made this plan type 2. Had problems with the LCM/xml and finally finished by using the extractor contour and loading by using the outlineload utility. Dimensions are now based.
  • Initially, wrong Bishop Calc. To change the value of the hsp_systemcfg for the type of plan table = 2 instead of 3 as it was in the table.
  • Calc Mgr shows that type of plan 2 and no plan to type 1.

  Any ideas?

  Probably the best way to rebuild the application and then reload the hierarchies or hack files XML of LCM, if 11.1.2.3 then you would be able to create/delete plan types.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• PLS-00103: encountered the symbol "PREPARE" when expecting one of the following conditions:

  Hello

  Clearly, I'm doing a basic error.

  It is my statement prepared;

  Variable identifier;

  EXEC SQL PREPARE sql_stmt OF ' SELECT order_name, order_status OF orders WHERE order_id <: id; »

  I get the error on execution of the file using @/dir/file.sql

  PLS-00103: encountered the symbol "PREPARE" when awaits an of the

  Next:

  What is the problem?

  concerning

  Sameer

  Yes. You are right. A thorough SQL more guide and modified the SQL for this

  Variable identification number

  VARIABLE order_info REFCURSOR

  Begin

  : id: = 20000;

  Open: order_info to SELECT order_name, order_status OF orders WHERE order_id<>

  End;

  It works fine when it is called from the @/file/file.sql command prompt

  then I print command line order_info

  Thank you

  Sameer

• Display error message when a condition in the process page returns false

  Hello
  
  I doubt by displaying the error message in a page. In my treatment of the page, I have a process that is assosiated with
  
  a press the button. In the process, I have an 'if' condition and insert in a table when the "If" condition returns true. If
  
  It returns false that I need to display an error message like "cannot insert a value. I tried to give him in the error of process
  
  message, but it is not displaying when the if condition fails. Help, please
  
  
  Thank you
  
  TJ
  
  Edited by: tj2010 Oct 6, 2009 21:25

  Hello

  Have you tried

  If condition = true
  then
  insert into the table;
  on the other
  apex_application.g_print_success_message: = "your Message here";
  end if;

  Make sure that the branch on the page that is triggered after your process has the "success of process message includes" checked.

  Concerning

  Paul

• Counter: Why is 'Task is' returns True after the time of the HIGH?

  Realized that my other thread has been put out on the rails by... myself.

  Started testing the "task performed is" function on a counterexample over;

  Why is it returns "True" after time and not up AND down?

  And more still-so, how can I get him back 'True' after the time of low AND high? How can I get it to tell me that it's "done" after 9.1seconds instead of the ~ 3 seconds like today. Is there a better setup that I can use? (the numbers are arbitrary)

  

  

  A couple of notes, assuming that we have to deal with default impulses that are active top with a low idle state.

  1. in general, a pulse is defined with a 'time in idle state', first followed by a time in the status of the pulse.  Therefore, by definition a pulse (and so also a task of pulse) is indeed at the end of its active state (high).

  2. HOWEVER, the impulse first in no pulse train DO NOT USE 'small time' entry to set his time in idle state before the pulse.  Instead, it uses the "Initial deadline" entry for the first pulse while 'Low Time' is used for all subsequent impulses.

  3. as a result, when you generate a single pulse, 'Low Time' is meaningless.  Only 'Initial period' is important.  Therefore fitting your low downtime desired within the' original' instead of ' Low Time.

  This type of agreement has always seemed awkward at best to me.  I think that aid should be a lot more important emphasis on the idea that 'Small time' gets ignored for pulse unique.  I mean, the info * is * there but it's pretty easy to miss before you know to look for.  In any case, hope this helps you in your application.

  (An alternative you might consider is to set the pulse with a high idle state.  Then you wire the "Initial delay" to set the first time high and your task would end after 'small time' you set.  Just be aware that when you work with reverse polarity pulses, you should check the output terminal to see what is true by default as well until you begin your task and after remove you it from the State.   A given Council could be biased with meter output in poor condition, so when your task wants to reverse the polarity you might see a rising edge, the task begins in its state of rest high and then a front coming down like the ends of the task and the jury returns to its weak State by default.)

  -Kevin P

• isShowing() returns true when I do not see the image

  Hello friends,
  Why isShowing() returns true when I do not see the image?
  
  See you soon,.
  André Uhres
  

  import java.awt.*;
  import java.awt.event.*;
  import java.awt.image.*;
  import java.util.logging.*;
  import javax.swing.*;
  
  public class IsShowingDemo extends JFrame {
  
      private JTextArea jTextArea1;
  
      public IsShowingDemo() {
          jTextArea1 = new JTextArea();
  
          setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
          setTitle("IsShowingDemo");
  
          jTextArea1.setBackground(new java.awt.Color(255, 255, 204));
          jTextArea1.setEditable(false);
          jTextArea1.setLineWrap(true);
          jTextArea1.setText("Please iconify this window or take some other window "
                  + "to front so that this one is hidden. "
                  + "Then double click the white tray icon.");
          jTextArea1.setWrapStyleWord(true);
          getContentPane().add(jTextArea1, BorderLayout.CENTER);
  
          setSize(400, 300);
          setLocationRelativeTo(null);
  
          BufferedImage image = new BufferedImage(16, 16, BufferedImage.TYPE_INT_ARGB);
          Graphics2D graphics = image.createGraphics();
          graphics.fillOval(2, 2, 12, 12);
          setIconImage(image);
          installTrayicon(image);
      }
  
      private void installTrayicon(final Image image) {
          TrayIcon icon = new TrayIcon(image, "IsShowingDemo", null);
          icon.addActionListener(new ActionListener() {
  
              @Override
              public void actionPerformed(final ActionEvent e) {
                  boolean showing = IsShowingDemo.this.isShowing();
                  JOptionPane.showMessageDialog(null, "frame is showing = " + showing
                          + ", \ndo you see the frame?");
              }
          });
          try {
              SystemTray.getSystemTray().add(icon);
          } catch (AWTException ex) {
              Logger.getLogger(IsShowingDemo.class.getName()).log(Level.SEVERE, null, ex);
          }
      }
  
      public static void main(final String args[]) {
          EventQueue.invokeLater(new Runnable() {
  
              public void run() {
                  new IsShowingDemo().setVisible(true);
              }
          });
      }
  }

  Because the image shows according to Java. They could be overlapped by other windows or is reduced to a minimum is not something that Java checks in this method.

  If you want to make visible by the user you will need to use something like:

  if(TestShowing.this.getExtendedState() == Frame.ICONIFIED) {
    TestShowing.this.setExtendedState(JFrame.NORMAL);
  }
  TestShowing.this.toFront();
  

  But make sure it is visible to the user would require native lib I think (or take a screenshot and are looking for your setting here).

• Conditional formula using one of the two operations

  How to create a conditional formula where the results are a choice between two formulas based on the cell to two cells has a value greater than 0?  More specifically, I have to add value in a cell (in the column headed "added amount") to a cell in a column of the running totals if the value of this cell is greater than 0, or subtract the value of a different cell (in the column headed "amount withdrawn") in the same line, if the value of this cell is greater than 0.  Only one of the two will have a value in a given line.

  Hi George,.

  If you only have a value in a column, then you have even a logical formula. You can do this:

  

  A2 is an input value, it could be called "balance forward".

  A3 is filled down.

  Quinn