1620CDS HARD drive insulator pad

I stripped (Doh!) my 1620CDS satellite - to change a very noisy fan and reconstruction ended up with a thin wafer rubbery to remember being so ontop of the HARD drive, it seemed to me. However, when the plate is in a position to clear the small hole that is marked to hold light imluminates away from power of the machine but the machine does not start. If I remove the buffer total powers the machine on no problem, but I don't want to omit this thin rubbery pad over the long term. Any advice greatly appreciated.

Hello Stephen

1620 satellite is old enough and you'll be lucky if someone has enough experience and you give an appropriate response. If nobody helps you to try to contact the authorized Service partner and I'm sure they can help you.

I know just that HDD (with cart) is placed under the keyboard and fixed with two screws.

Good bye

Tags: Toshiba

Similar Questions

  • Can I connect my I pad for Samsung external hard drive m3

    is there a lead to transfer the data from my external hard drive Samsung-m3 on my I pad

    N °

  • HP Pavilion 17: mouse pad does not work after replacing hard drive

    Hello

    After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

    I installed the Synaptics driver but it didn't help.

    How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

    USB mouse works fine.

    See you soon

    The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

  • Hard drive and memory for Lenovo idea Pad S10

    I have a Lenovo idea Pad S10 and I love it.  Its a great little machine.  I would like to make one or two questions please.  Can on put a larger hard drive and how much memory is the maximum.  I currently have 2 GB of memory.

    Also, I tried to do my income tax using it - I uses Taxcut and tried to install it on and the machine said he couldn't make Taxcut.  I suppose that the system is not big enough to cope.  If true that I very well because I have a desktop computer, but I was just wondering if we can get a bigger hard drive and if it would make a difference.

    No complaints at all, it's a great machine.

    Thank you

    Bobby

    Hello and welcome,

    Memory 2 GB is the maximum... 500 GB HARD drive no problem... and at least

    High resolution > 1024 x 576/600 ...

    cordially KalvinKlein

  • iMac mid-2010 for one SSD HARD drive replacement

    Hello

    After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

    The iMac in question is a model 27 "2010.

    Here's what I have on order:

    I also ordered suction cups and relevant screwdrivers.

    I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

    Cheers in advance

    Ian

    Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

    The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

    Good luck

    Sam

  • HP Pavilion 15 laptop: Short hard drive DST check failure... once again.

    A question that I had resolved a few months ago started occurring again, in which the laptop is struggling to load things when started and soon after falls down and has to be restarted. I guess that means that the hard drive has failed once again and so I have no doubt about how to solve this problem, but I write this query to ask: why? Why has a laptop, I had since not even a year at this stage has already had the same problem occur twice, even with the replacement of the piece that broke the first time? I am willing to assume that this is something to do with excessive I will admit that it is enabled for a good part of almost every day, often for several hours I play the games on Steam on it. Currently, I do not plan to have the hard drive replaced again because it is clearly an issue that will keep occurring that the way things are and if I can get a PC that won't break every time a gust of wind so it hits. Any information on why this happens and how it could potentially be avoided in the future is appreciated, especially if it offers a solution that doesn't involve payment of an exorbitant amount of money.

    The worst enemy of hard drives is heat. If you play on a computer that is pushed to the limits of the game, a lot of it can wear on a hard drive for a few months. You get a lot of activity of fan during the game? A cooling pad may be an option, or on a computer box of Grandpa instead of a laptop for the games.

  • Re: Satellite U400-11 q with Vista has new HARD drive but no recovery disk

    Hello

    Before starting a very important message: I do not usually work with pc... :-) At my work we have an IT Department for our PC :-))

    However, now I have to work privately with a PC / laptop and I need help: I'm sitting in front of a Toshiba Satellite U400-11 q with a HARD drive completely newly formatted and unfortunately WITHOUT recovery CD or DVD!

    So far I managed to format the new HARD drive and put a Windows Vista Home Basic (OEM software) from my old pc on this notebook. However, nothing works again (I want to get into the Internet, etc.).

    So, I now have to put on all the involved drivers as well as drivers TOSHIBA original, right?

    How can I do this? What drivers to I need? Do I have to download all the drivers concerned (total 113) one by one on the Web from Toshiba site?

    ANY help is appreciated as I see myself spend all night in front of the PC...

    Thank you
    M

    For the benefit of mobile work, you need to install all the necessary drivers and tools and utilities.
    Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

    Any substance must be installed according to installation order. Here it is:
    Windows Vista SP1
    Chipset Intel module
    Intel Robson (Intel iMSM Driver)
    Intel Crestline-GM / UMA Driver
    or
    AMD M82XT /M86 driver
    Audio driver Conexant CX20561
    Driver LAN Marvell 8040/8055
    Synaptics Touch Pad Driver
    Conexant Modem driver
    Wireless LAN driver
    Chicony camera software
    Bluetooth Stack for Windows by Toshiba
    CIR Port driver
    TOSHIBA Value Added Package
    TOSHIBA hardware configuration utility
    TOSHIBA supervisor password
    TOSHIBA SD Memory utilities
    AuthenTec AES1610 fingerprint utility
    TOSHIBA ConfigFree
    TOSHIBA Assist
    TOSHIBA Speech System
    CD/DVD Drive Acoustic Silencer
    Toshiba HDD Protection
    TOSHIBA face recognition
    TOSHIBA TRS driver
    Broadcom V2.14.4.0
    HDMI Control Manager
    ProtonPack for Vista

    Install all the stuff on this list. If there is something missing just continue with the next.

    By the way: this machine works perfectly with Win7 32-bit so I highly recommend you to use Win7 instead of Vista.

  • Equium M50-192 will not start - HARD drive problem?

    Hello

    can someone help me please
    I had a Toshiba laptop. I had for about 3 years, every time I turn it on it gets to the Toshiba logo, but won t charge up.

    So I tried to put the recovery disk in and boot from the disk or try to restore but it won t anything off the drive, it gets the full recovery of the hard drive, but when I select the option to do this, it just says: for a drive partition error checking please try again?

    My hard drive is not partitioned. It also makes a funny clicking on in the touch mouse pad is one then after a while a beep. I left it and woke up and it was like that

    Sorry I'm not very good with computers of m.
    If any 1 got any idea please help

    Just noticed in my bios it says hard disk = none?

    Hello!

    What Satellite laptop do you have?

    I think that your HARD drive is defective, but you can check with the Drive Fitness Test.
    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    Download the image, burn it to a disk and boot from it.

    Good bye

  • Installation of a second hard drive in an HP DC7800 Tower

    I am installing a second hard drive in this PC.  Here now, the drive in seems to have bit sockets rubber screwed onto the side of the disc.  These rings slide into the slots in the area of the disc hard turn... anyone know where I could get these little pads?  You can not install the drive without those crossings.  The service rep has no idea what I was talking about.

    tecbal,

    According to the maintenance manual, extra screws are provided for mounting the 2nd disc, see Figure 2-19

    Extra Hard Drive isolation Guide screw http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162202/c01162202.pdf location

  • Looking for numbers of HARD drive

    Hi guys,.

    I do a lot of service for hp printers and their two especially one in particular that we have a lot of problem hard drive with the ch 3035 that come with that disk hard western digtial blue. I am looking for the part number for the black western Digital hard drive replacement, as well as I've not stumbled on any question, I know I want to have one on hand I can't find a spare hard drive part number for the hp laserjet 500 m525.

    I think what you want is CF116-67907.

    As soon as the Page 170 of repair:

    Table 2-3 clients auto-repair (CSR) and repair kits (suites)

    Number of part article

    USB control panel cover 5042-8977

    Kit Moss-reflector

    Foam reflector ●

    Installation instruction ●

    5851 4878

    Carpet Kit spring separation

    Spring ● separation pad

    Installation instruction ●

    5851 4879

    Transistorized module SSM Kit

    Module memory alternatives for the M525dn model

    ● SSM SanDisk 8 GB

    ● Lock key

    Installation instruction ●

    CF116-67916

    Hard drive Kit

    Replacement HP encrypted high hard drive Performance for the M525f model

    ● HDD 250 GB SED

    ● hard disk support

    Installation instruction ●

    CF116-67907

    Hard drive Kit

    Replacement HP encrypted high hard drive Performance (Government option)

    ● HARD DRIVE 320 FIPS140

    ● hard disk support

    Installation instruction ●

    CF116-67915

    Tray 2, tape only RM1-8512-000CN

    Tray 3, cassette only RM1-6279-000CN

  • Repair shop wiped the hard drive and gave the wrong version of XP

    I have an Acer Aspire one model ZG5, which came with XP home. While still under warranty, the pad has stopped working and would then start is more upward. I sent it in for repair, they wiped the hard drive and fixed my problems. Except, instead of reinstalling XP Home Edition, XP Professional installed. I can't use my computer without first professional activator, which I just can't do it, and I don't have a version of the House that I can install myself. I wouldn't rather to pirate a copy, but I'm not sure how to get a copy of the House, I already bought once and do not feel that I should buy it a second time. How could I go solve this?

    Back to whom you have sent your computer for repair and request that they make good (on) copy of Windows back or give you a license key valid for the version that they installed.

  • Aspire 5745G: CPU, GPU, HARD drive locations

    Hello!

    UH is going to buy a cooling pad to 3 adjustable fans for my system. Then, I like 2 would set fans for the following parts.

    • Processor
    • GPU
    • HARD DRIVE

    Here is the view of my model (from the user's guide)

    Please select the above located parts locations.

    Thanks in advance before.

    Approximate positions are:

  • 5510 Precision add hard drive

    I am trying to add a hard drive SSD SATA 2.5 "to my new laptop of precision 5510.

    I need to order the inserter/adapter required hard drive and bumper rails to do this.

    I did chat and phone calls to the Dell sales without success to get the correct part numbers.

    In my opinion, that these photos represent the parts I need. They are drawn from this thread to another owner - 5510

    http://Forum.NotebookReview.com/threads/Dell-precision-5510-owners-review.784464/

    First picture shows the bumper shock side to hold the reader safely in the hard drive bracket - I have the disc and Calliper - and the leap card/card.

    Second picture is the leap card/card.

    Can anyone provide me with the required for any of the two references. The adpeter is the most critical.

    Thank you

    @Community,

    I can confirm that XDYGX is the cable for the disks of 2.5 inches for the XPS 9550 systems and precision 5510.

    3XYT5 is the side rubber insulator (there are 2 of them):

    3FDY3 is the HDD bracket (some units may already have this installed):

  • Grandma needs a hard drive for hand me down X 61 7762 WZH

    I inherited my granddaughter X Type 7762 WZH 61 Lenova think Pad.  He needs a new hard drive.  I don't have any idea what he need to buy and keep all the money I can.  I have someone to install it.  Please help me.

    Please and thank you.

    Mariposa

    Crucial.com has an easy to use web site, you select the option computer brand and model and it will show you options.

    Here's a direct link:

    http://www.crucial.com/Store/listparts.aspx?Model=ThinkPad%20X61%20Series%20(All%20Types) & Cat = RAM

    Click on 'Show all compatible internal hard drives' to see the less expensive options, because you probably don't have 1 TB...

  • Hard drive error code failed: WHD20-Z1J

    I got a Hard Drive - WDC WD10JPVT-75A1YT0

    Failed: WHD20-Z1J

    What does this failure of the stress test?

    This system is almost certainly out of warranty - and you do not have a failed hard drive on your hands.  However, the seven beep code indicates a problem with the CPU or the motherboard separated from the wrong drive.

    The overheating problem is probably what destroyed the hard drive.  If you want to repair the system, you need a new, 2.5 "9.5 mm or more thin disc SATA laptop to replace the defective one.  You can also check how you installed the heatsink - you replaced the thermal pads when you did?  Otherwise, it could easily be the source of overheating that causes the system to stop.

    Replacing a hard drive makes sense - if there is more damage just the drive, it is likely that you will need a motherboard, which will cost enough to consider a replacement system, particularly given the age of it.

Maybe you are looking for

  • Firefox ssl Web sites does not work on new profile

    I have firfox v.42 (previously 41.0.2) and Win10 with Eset. When I installed FF everything is ok on the default profile. I create a new profile and on this new profile ssl sites work not-mozilla even Web site. I tried to create some new profile - on

  • Satellite Pro A120 - Jerky empty reading after installing new HARD drive

    Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive. A I had a

  • Is it possible to have iMessage turned off automatically when the phone detects that it is not connected to wifi?

    My daughter continues to send iMessages when she's out and about (IE. When it is not connected to wifi) and iMessages are sent using its data allocation, and it continues to go over its data allocation. Is it possible to get the phone to turn off the

  • SbRio-9637 analytical engine

    Hello I m using a sbRio-9637 to measure analog voltages. I was wondering why there is no option to put the chassis in the Programming Interface Scan mode? How can I use the e/s without the Labview FPGA module? Will there be an update or is a Bitstrea

  • D110A and AirPrint in iOS 4.2.1

    Just thought I'd post what I did to get it to work on my D110a Airprint. Quite easy actually just upgraded my firmware to the printer to the latest version. The printer, screen, tap the icon of the tool. This takes you to the Setup Menu. Click Ok in