One or more modules of App?

Similar Questions

• How can I stop Firefox update itself if it will disable one or more modules that are essential for me?

  I am running Firefox 19.0.2 on Windows XP (SP3). As part of my KASPERSKY INTERNET Security 2013 the following modules (all 13.0.1.4250 versions) are installed (a) keyboard Kaspersky URL Advisor (b) of the content blocker (c) money safe and (d) virtual. They were all active and active when the KIS was installed on 17/02/2013, but a Firefox update has disabled all. I want Firefox to update only if all modules are compatible with him, otherwise the existing version should continue unchanged. How do I get there? What is the latest version of Firefox that is compatible with these add-ons?

  BUT here's a BETTER WAY, "Firefox 19.0.2 on Windows XP (SP3)" user--(ou, dele de moins, une réponse moins dédaigneux).

  Without fear, go ahead and install the latest version of Firefox. (Worm 21.0 from June 1). Seriously... don't be afraid. But, then follow the 7 steps below to get you back in the saddle with Kaspersky capable.

  (1) right click on your icon of Kaspersky. 2) click on "settings". (3) in the left sidebar, click on "Web anti-virus". (4) in the next panel, click the "Settings" button... "under"Custom. " (5) (put a check mark in the box "Check URLs" (and everything else you want to activate here). 6) look for the 'OK' button outside of the expert group (is not in the control panel; it is behind this), then click on 'OK '. (7) Finally, click 'Apply' (if you must) and again click "OK".

  Best wishes to you and happy computing!

• Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Run the cleanup tool to remove Ps CC 2014:http://www.adobe.com/support/contact/cscleanertool.html .

  Restart the computer and then try to reinstall Ps CC 2014.

  Kind regards

  Ashutosh

• ORA-20001: APP-FND-02604: one or more of the following data are not valid

  Hello
  
  I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
  
  Start
  for e in loop (SELECT a domain NAME)
  -dbms_output.put_line (e.name); just to confirm the names are there
  fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
  end loop;
  end;
  */*
  
  
  eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
  
  ERROR on line 1:
  ORA-20001: APP-FND-02604: one or more of the following data are not valid:
  APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
  SECURITY_GROUP = STANDARD.
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
  ORA-06512: at line 4 level
  
  
  However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
  
  Dula

  Hello

  User_id = this will come from the fnd_user table?

  Fix.

  responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

  You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

  Thank you
  Hussein

• Failure of one or more shares of post-processing. For more details, see the OPP service log.

  Hi all

  We run personalized printing invoice selected program. Get the message in the message below

  +------------- 1) PUBLISH -------------+

  Post-processing of application 30224196 on node TEST on February 16, 2016 10:25:35.

  Post-processing of application 30224196 a failed February 16, 2016 10:25:35 with the error message:

  Failure of one or more shares of post-processing. For more details, see the OPP service log.

  +--------------------------------------+

  +------------- 2) PRINT   -------------+

  Does not print is not the output of this application because the post-processing has not.

  +--------------------------------------+

  [16/02/16 08:47:06] [235162:RT30224178] The execution of the actions of post-processing for request 30224178.

  [16/02/16 08:47:06] [235162:RT30224178] From XML Publisher postprocessing action.

  [16/02/16 08:47:06] [235162:RT30224178]

  Model code: FLTARSELXML

  Model app: ABC

  Language: en

  Territory: U.S.

  Output type: PDF

  [16/02/16 08:47:11] [235162:RT30224178] Output file has been found but is zero size - deleted

  [16/02/16 08:47:11] [UNEXPECTED] [235162:RT30224178] java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:570)

  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:235)

  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)

  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)

  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)

  at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)

  at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)

  Caused by: java.io.UTFDataFormatException: invalid UTF8 coding.

  at oracle.xdo.parser.v2.XMLUTF8Reader.checkUTF8Byte(XMLUTF8Reader.java:160)

  at oracle.xdo.parser.v2.XMLUTF8Reader.readUTF8Char(XMLUTF8Reader.java:175)

  at oracle.xdo.parser.v2.XMLUTF8Reader.fillBuffer(XMLUTF8Reader.java:120)

  at oracle.xdo.parser.v2.XMLByteReader.saveBuffer(XMLByteReader.java:450)

  at oracle.xdo.parser.v2.XMLReader.fillBuffer(XMLReader.java:2294)

  at oracle.xdo.parser.v2.XMLReader.skipWhiteSpace(XMLReader.java:2039)

  at oracle.xdo.parser.v2.NonValidatingParser.parseMisc(NonValidatingParser.java:355)

  at oracle.xdo.parser.v2.NonValidatingParser.parseProlog(NonValidatingParser.java:324)

  at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:284)

  at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)

  ... more than 17

  Oracle Applications: 12.1.3

  As per Doc-ID 1626049.1 ,

  < pl moderator Edit - deleted section CAUSE of the above MOS Doc - don't post content MOS Doc - this is a violation of your Support contract >

  The same files are processed in another instance of instance test also.

  Thanks for your help srini.

  I found the solution.

  Caused by: java.io.UTFDataFormatException: invalid UTF8 coding.

  
  

  Some--> binary in WINSCP or PSFTP transfer settings

  Before ? >

  Now changed to encoding = "iso-8859-1"? >

  
  

  In the property report Module: settings XML--> XML prologue value--> encoding = "iso-8859-1"? >

  Now it works fine.

• Error: Failed to deploy due to one or more errors returned by 'osascript '.

  Hello, I really need some help here... I ve tried everything!

  I m using 10.10.4, xCode 6.4 and iOS Simulator 8.4 Yosemite.

  I m trying to deploy my ADF Mobile application on the Simulator, but little I m the below error and I can't find the solution. I ve tried almost everything that people suggest on the internet: mix different versions of xCode, I copied the .ipa Library/Application\ Support/iPhone\ Simulator/8.4/Applications/ and when I deploy it with the command line xcrun installation simctl started SkinningDemo.app I get the error there is no ¨ ¨The application controller folder "ApplicationController"when I run the application deployed in the Simulator.

  Here is the log of the jDeveloper (11.1.2.4): Im trying to deploy a sample given by Oracle, I know that there is no problem with the ADF Mobile code...

  [09:31:21]-deployment began.  ----

  [09:31:21] the target platform's (iOS).

  [09:31:21] early deployment of ADF Mobile application 'SkinningDemo' to iOS using the profile "iOS2_DEBUG."

  [09:31:21] run command line: [/ Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild, - version]

  [09:31:21] has been successfully run in command line.

  [09:31:21] analysis of the dependence running...

  [09:31:21] building...

  [09:31:21] deployment of 3 profiles...

  [09:31:21] wrote the Archives Module to /Users/user1/Downloads/PublicSamples/SkinningDemo/ApplicationController/deploy/ApplicationController_MobileFeatureArchive1.jar

  [09:31:21] WARNING: no resource catalog enabled ADF components to the package

  [09:31:21] wrote the Archives Module to /Users/user1/Downloads/PublicSamples/SkinningDemo/ViewController/deploy/ViewController_MobileFeatureArchive1.jar

  [09:31:21] Verify the existence of the source directory of the ADF .adf Mobile application...

  [09:31:21] check the Application Controller project exists...

  [09:31:21] checking dependencies of applications...

  [09:31:21] checking dependencies of the project...

  [09:31:21] Validation of the application XML files...

  [09:31:21] Validation of the XML files in the ApplicationController project...

  [09:31:21] Validation of the XML files in the ViewController project...

  [09:31:22] copy of the common javascript files...

  [09: 31:23] copy of FARs in the application of the Mobile ADF framework...

  [09: 31:23] extract the archive feature, 'ApplicationController_MobileFeatureArchive1.jar' in the deployment folder, "ApplicationController.

  [09: 31:23] extract the archive feature, 'ViewController_MobileFeatureArchive1.jar' in the deployment folder, "ViewController_MobileFeatureArchive1".

  [09: 31:23] deployment of counting files...

  [09: 31:23] copy of the files of CVM SDK built for the x 86 processor...

  [09: 31:24] copy of the CVM JDK files built for the x 86 processor...

  [09: 31:24] run command line: [cp - R, - p, Users/admin/Oracle/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/x86/, / Users/user1/Downloads/PublicSamples/SkinningDemo/deploy/iOS2_DEBUG/temporary_xcode_project/lib]

  [09: 31:24] has been successfully run in command line.

  [09: 31:24] run command line: [cp - R, - p, Users/admin/Oracle/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, / Users/user1/Downloads/PublicSamples/SkinningDemo/deploy/iOS2_DEBUG/temporary_xcode_project/lib]

  [09: 31:24] has been successfully run in command line.

  [09: 31:24] copy of file security related to the application of the Mobile ADF framework...

  [09: 31:24] run command-line path: / users/User1/downloads/PublicSamples/SkinningDemo/deploy/iOS2_DEBUG/temporary_xcode_project /.

  [09: 31:24] run command line: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild own installation - configuration Debug - sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator8.4.sdk DSTROOT = / users/User1/downloads/PublicSamples/SkinningDemo/deploy/iOS2_DEBUG/Destination_Root/IPHONEOS_DEPLOYMENT_TARGET = 6,0 TARGETED_DEVICE_FAMILY = 1, 2 PRODUCT_NAME = SkinningDemo ADD_SETTINGS_BUNDLE = NO

  [09:31:30] Frameworks/OracleADFMobile.sdk/Headers/ADFShellDelegator.h:42:1: warning: no 'attribute', 'don't keep', or 'copy' attribute is specified, -"assign" is supposed to [- Wobjc - property-no-attribute]

  [09:31:30] Frameworks/OracleADFMobile.sdk/Headers/ADFShellDelegator.h:42:1: WARNING: default property attribute 'attribute' is not suitable for non - GC object [- Wobjc - property-no-attribute]

  [09:31:30] ld: WARNING: PIE off. Absolute addressing perhaps (-mdynamic-No.-pic) not allowed in signed code PIE, but used in args_loop of Frameworks/OracleCVM.sdk/libcvm_adf_x86_debug.a(invokeNative_i386.o). To correct this warning, compile with - mdynamic-No.-pic or link with - Wl,-no_pie

  [09:31:30] has been successfully run in command line.

  [09:31:30] ADF Mobile application deployment framework to the iOS Simulator.

  [09:31:30] run command line: [osascript,-e, tell application "iPhone Simulator" to quit]

  [09:31:30] has been successfully run in command line.

  [09: 31:32] run command line: [cp - R, - p, Users/user1/Downloads/PublicSamples/SkinningDemo/deploy/iOS2_DEBUG/Destination_Root/Applications/SkinningDemo.app, Simulator/8.4/Applications/com.oraclecorp.internal.SkinningDemo Users/user1/Library/Application Support/iPhone]

  [09: 31:32] has been successfully run in command line.

  [09: 31:32] run command line: [ln, - s -, v, Simulator/8.4/Library/Preferences/ Users/user1/Library/Application Support/iPhone. GlobalPreferences.plist, Simulator/8.4/Applications/com.oraclecorp.internal.SkinningDemo/Library/Preferences/ Users/user1/Library/Application Support/iPhone. GlobalPreferences.plist]

  [09: 31:32] has been successfully run in command line.

  [09: 31:32] run command line: [osascript,-e, tell application "iPhone Simulator" to activate]

  [09: 31:32] command-line execution failed (return code: 1).

  [09: 31:32] undeployment.

  [09: 31:32] - incomplete deployment.

  [09: 31:32] failed to deploy on the iOS Simulator.

  [09: 31:32] deployment failed due to one or more errors returned by 'osascript '.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  I´d grateful for the help,

  Thanks in advance!

  There is no dependency between ADF Mobile/MAF and a specific version of WebLogic.

  MAF runs entirely on the mobile device and does not care what is the backend.

  You must install the latest version of the extension of the MAF and JDeveloper 12.1.3 and upgrade your ADF Mobile application to this version.

  ADF Mobile won't work on free software more recent.

• model in one or more fonts that are not capable of generating text error. I rechecked all the fonts are web fonts. What should I do?

  I am using a template and when I go to upload to my ftp server, it gives me an error indicating one or more fonts on a specific page are not able to generate text. I rechecked all the fonts are web fonts. What should I do?

  Hello ConnorMurphy,

  I'm sure you used a police typekit on the page mentioned in the error. Try the solutions below, and you should be all set.

  Solution 1:

  • Disconnect Muse to help > log out
  • Leave the Muse and relaunch it.
  • Sign in with your adobe Id and password, and then try to download again.

  Solution 2:

  • Disconnect muse and Muse to quit smoking
  • Launch the application in creative cloud and sign out of it. Connect and disconnect activate Cloud Creative applications
  • Sign in again and update cloud Creative if you are prompted.
  • Launch the Muse of the applications tab of the CC app and try to download again.

  Please let me know if you still encounter the question FTP download.

  Kind regards

  Vivek

• Help-Code for one or more InDesign cannot be generated. (Error 400: font not available).

  Hello

  I have the last Version of Muse in a Mac. Yosemite.

  I have problems when I want to publish my Web site. It appears error 400.  For some reason, the code cannot be generated for Typekit. That s the German version. "Code for one or more InDesign in"Homepage"cannot be generated. (Error 400: font not available).

  

  A time comes this: publish the view have an error, because the Muse may not have an HTTP connection. It may be a software firewall that does not allow to connect. The main reason may be a software firewall that stops the HTTP connection. Probably you should check the Firewall properties.

  

  

  But nothing has changed.

  I did the following things:

  1. I'll raise the app
  2. I disconnect from the creative cloud, leave, reconnect and reopen Muse.
  3. I remove Ghostery.
  4. Muse I uninstalled and re-installed.
  5. Restart the computer.
  6. Try again with a new Web site.

  It's my current antivirus

  

  Help please! Need to finish a project.

  Looks like you have anti-virus/anti-malware with settings that prevent Muse to connect to internet. Your screenshots are not visible on the forum. They must be inserted using the response within the forum feature in your browser (click the camera icon to add an image).

• Maj PointInsertion by one or more characters?

  for example, I have a text like

  ¹ blabla blabla

  and my insertion before the 1 point. How can I get the insertion point after the 1? or maybe before the second Bond,

  How can I change my insertion point from one or more characters?

  You can check for the index of the insertion point after the story.

  If you want to move the selection of this insertion by one point, simply do the following:

  app.select(app.selection[0].parentStory.insertionPoints[app.selection[0].index+1]);
  

  Uwe

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• I have a new PC with Windows 10 Pro and I leave iTunes every time I gt the flollowing message. "One or more applications use scriping of iTunes interface. Are you sure you want to exit? "All help to stop this would be appreciated.

  I have a new PC running Windows Pro 10 and everytime I close iTunes I get the following message.

  "One or more applications use iTunes script interface. Are you sure you to quit smoking? -If you have nothing will close the application using the script interface and a 20 20 second timer starts. "

  I was wondering if someone can help me with a solution to this?

  What third-party software is running on your computer? Last.FM is one that comes to mind.

  TT2

• Firefox's search function seems to have become the HATS or caps-no specific, so that typing a word in non-caps will not find matching words with one or more uppercase letter.

  Find seems to have changed in Firefox. Before, when making a (CTRL + F) to find, research was not specific or non-specific to the caps CAPS. "In other words, if I typed in"firefox"(without ceiling), it will find the words"firefox,"Firefox", or "FIREFOX", regardless of capitalization. Now, however, the function finds will only match exact same capitalization. Totally, this undermines the usefulness of the service and is a major concern. Please fix.

  This has happened

  A few times a week

  == I noticed in during the two or two weeks.

  Make sure that the "match case" box in the find (Ctrl + F) bar is not activated.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• One or more PDF documents are opened in a web browser - message

  Hello

  I have a new laptop series L and its great. The only foible I can think is a message that I get when I try to stop. There is a message box that says: "one or more PDF documents are opened in a web browser. If you are now leaving the adobe reader software, these documents will be closed. Are you sure you want to exit? ».

  The thing is I don't have any PDF or web browsers open at the time! Can you help me please?
  Thank you, Mark.

  Hi Mark

  Believe me it s no big deal the same thing happens from time to time on my laptop
  Usually, PDF files can be read with the Adobe Acrobat reader software. This service application runs in the context of the BONE and this message can be displays if the Adobe Acrobat reader software can not close the background automatically process

  I solved that little problem by deleting the software acrobat reader from the system. After restarting again I reinstalled it again

  Now, the message does not appear and everything works like a dream ;)

• How to convert one or more files LVM of large file TDMS (500 MB, 32 M samples - 2 channels)

  I would like to be able to read at least 4 million lines of data total 32 million lines at a time. The TDMS file has given for 2 channels and no time data. If I can convert TDMS files in one or more files LVM, I can read large files of LVM using the JMP software.  I'm using Labview 2009. Please provide suggestions.

  Thanks in advance. Best regards, Manish (Univ of a to z)

  Hi Manish,

  For your problem with is .tdms to .lvm, take a look at this forum and This example of community.  I checked out, and in my opinion, he should be able to work well for you in regards to creating multiple files .lvm from single .tdms file.  The only thing that could be a problem is the time requirement to enter all in LV, and saves data to several files, but you will encounter when you work with large consumed data.

  I would also suggest that you take a look at tiara if you are searching by analyzing large data sets.  The program is designed to manage large sets of data and make the analyzation on the data.

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.