One or two database is necessary, if I have two FxM?

Similar Questions

• Apply one or two newspapers archived in the cloned DB

  11.2.0.3 on Solaris 10
  
  Here's an example I borrowed from another thread OTN
  
  
  Sometimes clone us our production database for test servers and we encounter this error. This error occurs because RMAN only backs up online redo logs from the source DB (expected behavior). During RMAN recovery get these sequences that have been the source of the DB ORLs.
  Recovery will be error like below when it does not find these sequences in the backup.
  
  
  To resolve this issue, we can run ALTER DATABASE OPEN RESETLOGS;. But, sometimes containing these sequences in ORLs of Prod
  changes important which must be cloned in the server to test as well. Once these sequences obtained archived in the Prod, I can copy the logs to check-in on the test server.
  
  But how to apply just one or two archive logs on the test server?
  

  RMAN> recover database;
   
  Starting recover at 11-MAY-12
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=513 device type=DISK
   
  starting media recovery
   
  archived log for thread 1 with sequence 70149 is already on disk as file /backup/oracle/fast_recovery_area/DB11/archivelog/2012_05_11/o1_mf_1_70149_7ttnrxnn_.arc
  archived log file name=/backup/oracle/fast_recovery_area/DB11/archivelog/2012_05_11/o1_mf_1_70149_7ttnrxnn_.arc thread=1 sequence=70149
  unable to find archived log
  archived log thread=1 sequence=70150
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of recover command at 05/11/2012 15:25:31
  RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 70150 and starting SCN of 5613624984

  Use SET up.

  For example, if the last archivelog you applied is SEQUENCE 70150, then you do:

  run
  {set until sequence 70151
  recover database
  }
  

  You must ensure that the archivelog was generated by the source database (e.g., number one explicit ALTER SYSTEM ARCHIVE LOG CURRENT to force an archivelog)

  Hemant K Collette

• Slideshow module and text overlay on only one or two images.

  I read the manual, using the slide show, and I see that I can add text to images, but I want to add some text in the first image only and maybe one or two inside the view. Is this possible?

  One way:

  1. in the overlays Panel, place a check next to text overlays

  2. click on the ABC in the toolbar and select the legend or title in the menu down

  3 clear the field caption or title in the metadata (library Module) for all images of the slide show. (if necessary)

  4 enter the legend or title you are only looking for the text images.

  5. set the color, size and placement in service.

• Apple music stops after playing a song! I use windows 10 and the new itunes. He stops playing after one, sometimes two song... radio too... Please help. I installed and all new authorized...

  Apple music stops after playing a song!

  I use windows 10 and the latest itunes on my laptop. He stops playing after one, sometimes two songs... radio too... Please help.

  I installed and all new authorized...

  Thank you...

  Markus

  same thing here for all my Mac or PC windows... they are "working" 8 months later... unreal

• How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago

  Welcome to the Apple community.

  I'm afraid that is what happens when you share an Apple ID.

  Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.

  I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.

• HP 15 r204ne: r204ne 15 hp ram slots how this laptop has one or two

  When I checked my ram I found only 4 GB
  Now I want to upgrade my ram
  Is that my laptop (hp 15 r204ne) has one or two slots of ram and what is the maximum memory I can update in every situation

  My operating system is Windows Home Edition unilingual 64 10 x

  Thank you

  Here are a few selected information from the Service Manual that answers your questions;

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model) 2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)

  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)

  Supports up to 16 GB of RAM in the following configurations: 16384 MB total system memory ● (8192 × 2)

  If you have 2 slots and can install 2 x 8 gigabytes of memory to laptop DDR3L-1600 yours is a "Core" (i5).

  HP recommends 8 module in concert:

  Module (PC3L, 12800, 1600 MHz) memory: 8 GB 693374-005

  Kingston sells this compatible memory:

  http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8&QID=1456265312&SR=8-1&keywords=693374-005

  However, upgrading memory is considered possibly a procedure of "Authorized Service Center only" (the manual is inconsistent on this) and is not easy to do in all cases. It would also potentially negate your warranty, but it is not 100% certain, either. Here is the manual and memory installation is completely up to the 75 percent. It would require removal of the motherboard, we will tell you.

  Your repair manuals

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I recently bought Empires one and two years, but I can't seem to install or to come on my computer

  I recently bought Empires one and two years, but I can't do either to install orcome upward on my computer on my vista or 7 computers laptop anyone can help please?

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest to perform the clean boot and then try to install.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 3:

  I also suggest you to follow the link and check.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  See also:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• Hi, is there one or two locations in hard drive on Aspire V3 771 G-736b8G1TMaii?

  Hello

  is there one or two locations in hard drive on Aspire V3 771 G-736b8G1TMaii? The unit comes with a 1 T hard drive and I would like to install a second inside.

  Also what is the keyboard lighted on this model?

  Thank you for your response.

  Alain.

  Yes it has an additional area to another HARD drive

• RVS4000 loses static IP config one or two times a month

  Bought the RVS4000 in 11/2012 to work behind a NVG512 (pass thru mode). I use the V2.0.2.7 firmware version. For some reason any one or two times a month I lose access to the internet. Sometimes it's the fault of AT & T, but other times my RVS4000 doesn't behave well. Finally, I took screenshots of each screen, which I configured in the RVS4000 to make it work in my environment. Last night we lost internet access again. Before unplugging everything I looked into the RVS4000 and found that my setup WAN had returned to a fault in Automatic Configuration - DHCP instead of static IP address I had previously recorded.

  It seems that my RVS4000 is losing just this WAN setting (forwarding static IP and port mapping data and VPN client data is still intact.

  No clue on what to do next?

  Walter, seems that the device may be defective. If the device is completely locked to the point DHCP responds more and the router of the user interface is not accessible, looks like a device locked.

  If you want to debug further, you can configure an external syslog server to see why. But frankly, looks a bad hardware.

  I recommend that you give the HWC appealed for a possible replacement.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  -Tom

• How will I know if my Adobe Cs6 Design Web Premium license is for one or two computers. I can´t get any online support :(

  How will I know if my Adobe Cs6 Design Web Premium license is for one or two computers. I can´t get any online support

  Your license allows you to have the software enabled on both machines at any time.  If you need to have on another you would need to disable one of the two machines before you activate the new installation.

• Is there a way just to have one or two applications, for example first pro cc or the two sequels. But I see LL is Photoshop for 9.99 per month, is there a way I can get just first pro cc only for 9.99 or something like that?

  Is there a way just to have one or two applications, for example first pro cc or the two sequels. But I see LL is Photoshop for 9.99 per month, is there a way I can get just first pro cc only for 9.99 or something like that? I don't

  # Photography is one of its kind special promotion. There is no other package prioritized at a similar discount. You can get single app or CC full plans.

  Mylenium

• Error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I came to work today with the following error is displayed:

  February 5, 2014 01:27:19 error ORA-16778: make the mistake of transport for one or more databases.

  
  

  Looks like this error disappeared but now I have the following error:

  February 5, 2014 11:52:40 error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I did some research on the forums and I think I need backup and restore, but I'm not sure.

  Here are some questions that I saw others asking in the forums:

  PRIMARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select current_scn in the database of v$. -871568619

  SECONDARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select max(sequence#) from v$ archived_log in case of application = 'YES '; -24562

  Select current_scn in the database of v$. -870987797

  Select * from v$ archive_gap;

  Thread # Low_Sequence # High_Sequence #.

  1 24563 24563

  Looks like everything is working, but the error is still appearing in OEM primer.

  The issue ended up being with the control file. I followed of many blog posts on how to roll forward the database before and they all said to restore the control file before you recover the database. I followed this paper: http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#CIHIAADC and it worked as expected. The old control file has had 6 data files that were in a different place than the others. The new control file, I created the primary had all the files of data in one place. After correcting the control to point to the locations correct datafile all started working again.

• I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months

  I bought lightroom 6 for my mcbook pro in June, installed and used one or two times very well.  (I also had a version of lightroom track 5 and separately installed creative cloud before buying 6)  I haven't used the application a few months and tried to open it this week without success, it launches the image of the foliage of the forest and freezes.  I uninstalled the version of lightroom 5, nothing helps.

  Hi Cyril,.

  If you are using the trial of both creative cloud, please uninstall it from the computer and try to revive the Lightroom.

  Thank you

• How many machines a licensed copy of CS4 can be installed on? One? Two?

  How many machines a licensed copy of CS4 can be installed on? One? Two?

  A single user license allows installation enabled on both machines.

• If I never bought Photoshop or any adobe product can buy one or two applications?

  If I never bought Photoshop or any adobe product can buy one or two applications?

  for the last photoshop you can subscribe, pricing and membership creative cloud plans | Adobe Creative Cloud

  the plan of photographers ($ 10 / mo for ps and lr) is the most economical.