One side of the light

Similar Questions

• Why display started moving, as shaking from one side to the other?

  suddenly the screen has started to move from one side to the other, she stop for 2 seconds, and then continue to move, as shaking.

  Hello

  (1) what is the brand and model of your computer?

  (2) remember to make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: Flickering of the Correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  I would say as you reset the settings of the monitor to factory settings and check if that helps.

  Please consult the manual of your monitor to perform the steps.

  You can also try to connect an external monitor to the computer to check if the monitor is defective.

  It will be useful.

• How to create a unique page on one side of the other view?

  I have a document that considers the side-by-side, except the first page.  I would like to see unique page and the ability to print a page by page!

  Any help?

  Thank you

  Blue

  Looks like you don't have a side-by-side, as it is normally referred to in Acrobat, but that the PDF file is actually a set of pages that are 2 pages per sheet. To be able to print a page of the worksheet, use the crop tool to select one side (and the same on all the leaves if you select everything). Then print this set. For other pages, simply move the culture across the sheet and repeat. Looks like it's what you're trying to do. If you want a single PDF file with 1 page per sheet, a crude to do this is to print each cropped to new PDF series. Then merge the two sets of printing and then rearrange the pages.

• only one side of the race

  Hello, I have a side border at iteam.

  I can't know all the properties in flex / as reference how to apply STROKE only on one side of the element.

  would be happy to hear that any information about you.

  Thank you

  jbeynar

  There are different possibilities.

  For example, you can try s:Line or s:Path - both would give you a lot of flexibility.

  FTQuest

• OfficeJet 8610: OfficeJet 8610 when you copy in duplex, one side to the other side

  When I try to copy multi-page documents, goes to 1 side 2 sides, one side is upside down. This works when the pages are in portrait setup but not when they are in the configuration of the landscape.

  It's COPY, not print, so I can't follow the advice to replace the flip setting. There seems not to be a setting on the printer itself to change that.

  I did a chat session with HP, but the problem was not resolved. I got a call a supervisor (level 2, no doubt), but I have not worked with them again.

  The printer is connected wireless. I run the installation wizard and the Finder solution and the update as well as the doctor of printing and scanning without result.

  Any ideas?

  Hi @Tiggy626A,

  I see you are having problems copying 2 sides in landscape mode. I will definitely do my best to help you.

  From the front panel of the printer, you can bind only on the long side, there is no option to change the copy to the short edge. I tried to copy 2 faces on our Officejet 8610 laboratory, one side released head downstairs. By experimenting, I found a solution, by loading the two documents to copy in the ADF file, load the other down. This will allow the copy two facing the landscape properly the printer. I know that's not very practical, but it worked out this way.

  This feature is available if you choose to scan documents and then print as a 2-sided document with a link on the edge short.

  Here is a document for the HP Officejet Pro printers 8610 - copying Documents.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Cannot copy master items from one side to the other (pages face to face) with the help of stick in place.

  I am trying to copy text from one side of a master page two "facing pages" face to another using Paste in place, then I me identical Master Articles for both pages, but stick it in place is not working.

  I select one side of A-master in the pages Panel (where I have the master items), the copy, and then by selecting the other side of the A-master, then glue in place.  But the points just stick on top of the original ones.

  Drag the items by pressing the alt key on the other side. In addition the SHIFT key keep aligned.

• Since the evolution of firefox, I can't print emails except on one side of the paper

  You have changed the settings to my impression, and now I can't print emails. When I try to print an E-Mail he prints in very small characters and only on the left side of the document. Other documents can be printed.

  HOW CAN I POST A REPLY WHEN YOU HAVE NOT SOLVED THE PROBLEM?

• How can I drag my clips of images from one side to the other quickly?

  Is it possible that I can drag a video clip of the right side to the left but faster that just take it

  and drag it to the left?

  I tried holding down SHIFT, alt, cmd, but key without success.

  Thanks for the help!

  Prior to zoom, select and cut out and then paste.

• 26.0 Firefox works do not correctly with Mac OSX 10.9.1. Text jumps from one side to the other spontaneously

  I used firefox on Mac computers for years. I am now under Maverick Mac OSX 10.9.1 and have major problems with sizing of text in windows and windows suddenly change size (much smaller) and jump on the left side of my desk. Apple does not support Firefox, so I can't get assistance on their part and Mozilla is impossible to contact them directly. Can someone please help with this problem?

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to move the 'new tab' button on one side of the screen to the other

  A settings file had somehow end up corrupt and have reconstitute default Firefox and start over with my custom toolbars. Only problem, is that the 'New tab' button wants to ONLY go to the LEFT of the tab bar. Will not be on the side RIGHT of it as it was before default. Want this back. Someone knows how to put this topic: config or what? I continue to seek my new tab on the right button and get irritated that it is on the left instead. Customize the will, not that it is placed on the right. Dragging it puts it on another toolbar, it falls on the left of the screen when you mouse on the right, or does nothing and quite the icon disappear toward the window customize.

  Well... scrap that...

  Make a toolbar missing and decided to add a few "separators" at the tab bar and all of a sudden he allows her to stay on the right side. Just carried away the separators and it actually moved where I wanted him to be. If I thought who could more quickly, have saved post here. At least it works now so do not bother it. * shrug *.

• Effect of green screen to only ONE SIDE of the split screen

  I know how to add a green screen... quite easy to drag an image in a video clip. However, I have a side-by-side video recorded where a participant has a green screen and the other does not. Basically, I try to have three layers:

  1 person with green screen video

  2 background image to go in the green screen

  3. any other person clip

  Can I do this in iMovie?

  iMovie supports only 2 layers.  You use final Cut Pro or similar to do more than two.  You can however share a clip with a layer and then re - import and add another layer.

  Geoff.

• T410 audio port gives the output on one side of the enclosure

  I had a T410 recently and have been pretty happy with it.

  The problem is, my normal headset used to work initially, had no trouble getting sound in both left and right headset speakers. Then slowly I started to have trouble getting sound in my left ear piece. I had to twist and turn the connector and it would work occasionally and it does not work most of the time.

  I tested with two headphones that work with other devices, but when I connect it with this, I hear in my right atrium only. Speakers work fine.

  How can I solve this problem?

  Hi and welcome to the forum!

  I have 3 iPod headphones, 2 of them are compatible parts but the 3rd is authentic Apple. Headphones compatible when connected to my T400 with the same problem you are describing, the sound comes only from one of their ear pieces and me too I have to twist and turn in a certain position for its exit from both ends. However, the genuine Apple earphone works out of the box, but all these 3 headphones work fine with my iPod. My conclusion is that only connect headphones of good quality with the thinkpad.

  But the problem could be different, I suggest you look at this thread and Knowledge Base article, maybe what you need is just an adapter to resolve this problem: -.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/audio-combo-Jack-vs-Headphone-Earphone-with...

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T510-combo-mic-audio-port-usage/m-p/217613

  I hope this helps.

• 6700: duplex - copy documents one side of the ADF

  Hello!

  I am interesting in buying a printer HP Officejet 6700 Premium.

  first of all, I understand perfectly that the ADF is not duplex.

  But, is it possible to print documents duplex ADF?

  i.e. first copies of documents on the side of page 1A, second document page 1 B, third doc on page 2 face has and so on...?

  See you soon

  Hello

  The ADF itself does not support two-sided printing (e.g. copy a document duplex indeed) however duplex printing is supported by the product.

  You can copy the 4 different pages as an example on 2 pages printed both on their sides by selecting 1-sided original 2-sided copy in the menu settings of copy.

  I assume that was your intention or maybe I misunderstood your intention?

  Shlomi

• PDF form - send again only one side at the post office

  I have a PDF file with 9 sites. I placed a small order form on page number 9 with a button to send the pdf to my email address. In the options, I can choose between some export options. Where can I find the Option "PDF - document as a whole.  Is there a way to send only the page number 9?

  ICH habe ein PDF mit 9 Inhaltsseiten. Auf der Seite, habe ich ein Bestellformular Internet, nach dem ausfüllen which last an meine E-mail-address zuruckgesendet werden kann. In den Optionen kann ich 'PDF - Dokument entire' Park. There're auch eine possibility, nur Seite 9 zuruckzusenden?

  

  Assuming that the file will be used in the free, not Adobe Reader, you cannot do so.

  You should consider only submit the form (FDF, the first option) data, however. It is a much smaller file, and you can import it into a copy of the form on your side to get a filled in the version of the file.

• One side of the scale

  I'm baaaaaaack! Don't act so excited Todd . The good news is that I'm RTFM! Took time off whiles my mother passed away from cancer, house burned, father had major heartattack, sister diagnosed with cancer, several close friends passed away, etc. Good news is that I am still above ground (at least so far!) Then began to take an AE class at the local college to help get my mind on other things. Professor is not too knowledgeable on the subject, but at least he admits that he. He's essentially a kind 3D Max to a guy. First project is the ole bouncing ball case. When it hits something, I want to only this side to deform, but of course when I try to scale, it deforms also on both sides. Some programs let you hold CTRL to do what I need, but no luck here.  As always, any help is appreciated. Thank you. CIN

  PS. great to see as much of the same great to people still hear!

  Just to flatten the background try to use effect remodel and an expression.

  Reshape using two masks. The expression will review the position there of the layer and adjust the percentage between the positions of two mask as the layer between in contact with the ground. Here are the steps. It will take you about 5 minutes.

  1. CTRL/Cmnd + is to create a new layer solid.
  2. Name ball.
  3. The size tab and type 100, tab to new type 100 again, and then select a beautiful red color.
  4. Press Q to reveal the Ellipse tool in the toolbar.
  5. Double-click the Ellipse tool to create a perfect circle.
  6. Go to the timeline and select mask 1 then press Ctrl/Cmnd + D duplicate the mask.
  7. Press V on the keyboard to switch to the direct Selection tool.
  8. Locking mask 1
  9. Click on the mask 2 low vertex. You should see two Bézier handles.
  10. Press the arrow button 20 times to move the vertex from the bottom to the top of 20 pixels (your model view must be 100%).
  11. Press the o button to select the anchor Point / Pan behind tool.
  12. Select the anchor point and move it in the same position as the vertex at the bottom of the mask 2.
  13. Press the V key to return to the direct Selection tool.
  14. Add effects > Distort > reshape the layer 'snowball '.
  15. Select 1 mask to the mask of the Source, 2 the destination mask.
  16. Hold down the Alt/Option key and click on the stopwatch per cent to add expression.
  17. Copy and paste in this expression:

  f = 400; // y position of floor
  d = 20;  // offset of mask 2
  p = position[1]; // Y position of anchor point
  
  if (p <=  f - d) {
       squash = 0
  }
  else if (p> f - d) {
       squash = linear(p, f-20, f, 0, 100)
  }
  
  squash
  

  Now every time the layer of the ball will move to a position Y 400 pixels the effect remodel will make a transition of mask 1 mask

  In plain English what the expression: I would define a value (f) floor is 400 pixels, I moved to the top of the bottom of the mask 2 upwards of 20 pixels, so I'll call that "d" for the deformation. I find the position of the layer by setting the value Y of the position "p". Now, if the position (p) is less than or equal to the position of the word (f) under the new background layer in accordance with (d) I put the value of the squash to 0%. If the position of y (p) is greater than the position of the word (f) minus the offset value (d) then, now here's the fun part, I want you to look at the value of p (the position) and when the value of the floor-20 to the position of floor standing slide in linear between 0 and 100. In other words from 380 to 400 change squash percentage between 0 and 100.

  Three steps and you're ready to animate your self encroaches on the ball.

  1. Create a new solid (Ctrl/Cmnd + Y) called floor which is about twice the size of your publication.
  2. Make layer 3D and rotation on the axis of X 90 °
  3. Change the position the layer at 400 Y and you're ready to animate your bouncing ball

  You can also use this same idea of the expression for the scale property by say between 100 and 80% scale, or you can simply move the anchor point very near the bottom of the layer of ball then animate the scale value of y. The key to get the best out of these ideas work well will move the anchor point.

  Hope this helps to open our eyes to the possibilities. There are also about a hundred other ways to do the same.