Online PDF form will not save edited info

Similar Questions

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• PDF form will not work in preview

  I just created a PDF form and it works in Acrobat and overview. First, however, I am unable to clear form. Is this a known issue with preview and should I worry about putting it on our Web site for use by the public?

  Preview has very limited support for PDF form and corrupts actually they (and other PDF files) in a number of ways when he saves them. This corruption is irreversible. I suggest you inform your users that they should not use Preview and use instead Adobe Reader/Acrobat or some other PDF viewers with of enough support for your form.

• PDF files will not save in the good resolution

  Hello

  Something weird happens to my Photoshop. When I save a file in .pdf, raster, or vector, it won't keep the resolution when opened in Adobe reader or a browser (if it is converted to svg).

  Someone has an idea what is happening? If I reopen them, it will show them as 100x100px files, but as soon as I open them outside the Photoshop they get rendered in the form of images of 20 x 20.

  My old files will open very well, it seems that Photoshop went nuts during the night.

  The solution, for a reason that my files were made in 300 DPI rather than 72 dpi in Photoshop

• PDF form will not calculate the selected fields as soon as there is a numeric value entered.

  All selected fields and as soon as there is a digital value entered, the total field displays nothing, not even a 0. It worked yesterday so I'm not sure what the question is today. I hesitate to do it again because this form has a ton of fields.

  Things to check:

  -That there is no error message in the JS Console

  -The field calculation order is correct (IE, that there is no 'delay' in the order in which the fields are correct results)

• Form fields will not save when employee saves the PDF file

  I'm on Acrobat pro (mac osx), my colleague is on Acrobat Reader 9 (XP pc). I did a few form fields in a PDF file and saved. Whenever she changes a part of the text in the fields and tries to save it will not save the things she entered. Whenever it opens, it contains my field data for moose.

  What steps should I take to make it to where she can enter their own text and save it without data loss.

  In Acrobat 9, select: Advanced > extend features in Adobe Reader

• In design issue - CC will not save PDF & TIFF images are missing

  My indesign file, I've worked on over the past two months suddenly will not save the pdf out. Before this problem with the economy that happened... The last page of the circular page 8.5 x 11 20, is gray/50% the whole page in gray? And the background image that has been placed in the document and left behind an empty "images box" disappeared (or so I thought). I'm going to place the background image in once again, assuming that I deleted it. I am also having the same problem with the other images on other pages where the images have disappeared leaving behind empty boxes that may not have the images replaced them as NDS. They will not be displayed.

  I went to check the display in inDesign aka he changed the overprint preview and the "greying" box covered now all layers on this page only. How design is very organized, so everything is on layers (of exodus's images, shapes, text, background, guides). Guides have disappeared, and this gray effect (almost like when you're in illustrator and isolate a form any other work turned a shade darker) is there with once again the empty boxes without the content that I placed in them.

  I therefore decided to close the file and reopen. nothing has changed. I tried to save out as a PDF, so I can make sure that the file is safe... it out will now save all and tasks from bottom says "Impossible to export the PDF file." That's all. No other explanation.

  Does all this sound familiar to anyone? Or did happen? Help.

  Post edited by: Elisha Bencich

  UPDATE:

  I deleted a page that was giving me trouble and copy and paste new content... which seems a sort of solve the problem for now. I have to register again the whole document into a new document, I hope that works... I wish that this form could let me post a screenshot of the issue, I'm sure it would give someone a understanding of what's going on.

  See remove minor corruption by exporting

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Reader 9.4 will not save the completed form of Pro v8

  I just create a new form that Reader 9.4 won't let me save the changes are complete on.  She can only look at one, editing, printing, but does not save the contents of the modified form.  If I open it with Pro v8, it works fine.

  I opened some forms that I created some time ago, and they work fine - view, navigate, print, and save the changes.  It's just this new form which will not save.

  Is there a setting some part that I inadvertently set which is the cause?  My customer really needs this form, but it is useless if they cannot save the changes.

  Also, I will check the updates on my 8, and now it's the v8.1.3.  I uninstalled Adobe Reader and not reinstalled - no change.  It also does the same thing (not allowing not saved) on two different machines.

  Thanks in advance

  The document must be enabled for the reader to be able to save a document updated the player. To do this, select: Advanced > extend features in Adobe Reader

• CO5110Y BIOS will not allow edits LAN or video BIOS version 5.38

  Hello

  I have a Compaq CQ5110Y with BIOS version 5.38. My problem is that I need to disable the LAN chip on board. My current BIOS will record the changes to the date and time, but it seems that it will not save the changes to the ADVANCED tab. I added a PCIe-16 video card. I tried to change the parameter by default-PCI PCIe - 16, and it will not save those or the other. I downloaded the update of BIOS 5.49 and tried to install it. I get an error message indicating that my computer does not meet the minimum requirements for this update. I replaced the original CD/DVD burner, as he would burn is no longer. I've also upgraded to 4 GB memory main. I can't find the older BIOS updates to try. No info found on the HP site regarding BIOS updates history and that they aimed to correct.

  On each startup, I get a message saying the BIOS defaults have been loaded due to a problem of error or check sum. Is there a BIOS update to fix this problem? If so, which version is, and where I can get it?

  It is a strange.

  Here's a guide that will explain the error code 9994.  I don't know if it will help you, but it's worth a try.

• Will not save file because it is supposed to be read-only, but I'm not read-only.

  Will not save file because it is supposed to be read-only, but I'm not read-only. The file is NOT read-only. I checked by accessing the properties on the file.

  The error message says:

  "The file may be read-only or another user can open. Please save the doent under a different name or in a different folder. »

  Hi farukp69792329 ,

  Please provide the point exact Acrobat & OS version installed on your system. This is the file is saved to the network drive or local. If his backup to disk network suggest you save to local disk.

  If its windows, please disable the preview pane feature.

  If you still get the same message

  Disable the Safe_mode Adobe

  go to Edition-> Preferences-> Security

  Uncheck the box enable improved security.

  Kind regards

  Christian

• Why FIREFOX will not save my HISTORY of parameters of USE CUSTOM settings?

  It is very very annoying. I'm ready to throw the bucket of bit of this program.
  I use it to access facebook and play farmville. I need to not FORGET things so that whenever I load farm town should not have their server stuff...

  Whenever I open fire fox and go to the who's who and load farmville I get a message that says I can load faster if I allow them to store data on my computer...

  I go into the settings of firefox and find that my history preferences won't save 'USE the PERSONALIZED SETTINGS.

  I need to change every time. I have the 32-bit and 64-bit of Nightly (beta version) on my computer.
  I completely removed those two, restarted windows 7, rebooted again, re-installed fire fox and it STILL happens...

  Why? I'll be darn if I use Solution Explorer, but at least it will SAVE the settings and gets their damn!

  Hello

  See the article How to fix preferences that will not save.

  Make sure you have not a user.js or mozilla.cfg file set your preferences each time you restart Firefox.

  • Also useful: http://kb.mozillazine.org/Preferences_not_saved

  Unrelated to the question: you have multiple Adobe Shockwave for Director Netscape plug-in is installed - some navigation problems may be experienced with several versions of the same plugin. Uninstall older versions.

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Firefox will not save my passwords for all sites, I checked the options, securtit and marked the box to save passwords. Any suggestions?

  Firefox will not save my passwords for any site. I checked the box 'Save password'. I tried several times over several days.

  Any suggestions?

  Under the Privacy tab, check box "remember history". My sister had the same problem, and this box is unchecked in its version. Please try it out.

• Firefox 8, will not save the username on some sites, is there I can to add a settings file manually?

  For most sites, FF8 records my login information. For some sites, it will not save my username. One site in particular, he used to be saved (I think that I added it to a settings file in an earlier version), but I deleted this user name for connection, and now I can't seem to save my user name.

  Is there a file somewhere that can be changed so that the username appears?

  Thank you

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/