PDF files will not save in the good resolution

Similar Questions

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• A PDF file does not print on the new HP printer

  I recently added a printer HP CM1415fnw in my office and I can't print any PDF documents. Word and Excel print very well. Why?

  Well, the point is moot, because the true culprint was my lame OS

  (Vista), so my laptop is in the shop getting Windows 7... Thank you for all

  your advice!

  Bill@VT http://forums.adobe.com/people/Bill%40VT has created the discussion

  "Re: PDF files does not print on the new HP printer.

  To view the discussion, visit:

  http://forums.Adobe.com/message/4558299#4558299

• A PDF file will not print on premium c309g-m

  I can't get the printer to print a PDF file. No matter what settings I do or what I can do to the printer, it won't print a PDF file. I export PDF files to jpg and print the image. How to make this work? I'm about to throw the printer out the window and buy a Kodak.

  Try to download the driver from 990c and see if that helps.
  1. click on Start Menu
  2. choose the devices and printers
  3. click on add a PRINTER
  4. LOCAL PRINTER
  5. Select USE the EXISTING PORT (the port of your printer is turned on)
  6. another window will open. Left side (choose HP). Right side, (choose DESKJET 990c)
  If you do not see the 990c, click WINDOWS UPDATE in the lower part.

  After you download the driver, try to print the pdf.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SWF file will not play on the Internet

  I've been everywhere on the internet, find the answer to my problem. I have a site in which I have two Flash animations that I need to play. We're working very well. I bought a model flash, edited, published, no problem. The other, I have a photo gallery template I customized, but it will not play on the internet, not even with the generated html file. Just a big black square appears. Here is a url to the nonworking time:
  
  www.atlantiswebandgraphics.com/ScottHambergArt.html
  
  This is the HTML generated by Flash 8. I noted that the publication of Flash 8 settings are set to 'Default' and the other Flash file that works is set to "Flash CS4 Settings." When I add that as a profile with a photo gallery, I get the error messages. I have screenshots of all the parameters in Flash, work and not work below files:
  
  www.atlantiswebandgraphics.com/images/WorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings1.jpg
  
  It's the working Flash file url: www.atlantiswebandgraphics.com/index2.html
  
  I could give much too much info, but I think better safe than sorry. And by the way, I'm really new to this (that's why I get models).
  
  Diane

  Thank you. I've decided to basically start from scratch on this model. It works now. As you say, must have been the unfinished function.

• Cannot find the recorded Divx files, or Divx files will not save... Windows 7 Pro

  Hi, I made recenty upgraded to windows 7 pro and Windows Vista in the past Edition, I had no problem, record and watch my videos with windows vista but now with the windows upgrade divx 7 after the cinema takes over with Divx web player I right click and click on save as video and save it in the specified Kathy I want and when I arrived to pick up its not there I tried automatically save to a folder and its still not here, I tried a different version of the divx player and I can always find them, even in the internet downloaded temorarly files is not there or max dowload, is there something I need to do in order for me to save them... help pleeease

  -----------------

• Acrobat updates became asymmetric. Now 12 framework will not save to the pdf format.

  Don't have Acrobat Pro of XI. It turns out that Adobe Reader installs too.

  Auto notify upgrade failed at some point.

  Deleted Adobe Reader.

  Loaded Acrobat XI, ran "check updates".

  A ran updates

  Open Frame 12

  Load the document, save in pdf

  ' To run 'Save as pdf', you must have Acrobat Distiller version 5.05 or higher installed.

  I downloaded my Adobe 12 update, so I don't have the original disks.

  What should do?

  TIA

  RELOADED Acrobat 12. Hard to find this 'thing' on the website of Adobe, but worked very well!

• HP Deskjet F4480: Pdf file will not be printed

  Until a short time ago, I always been able to easily print PDFs of Web sites (IE forms).  Lately, the same print screen is displayed when I select print but the print option is missing.  The only available options are save or cancel.  I can always print the doc by saving it to my desktop, but many preferred printing in a single step.  Why have changed my options?  Is there a way to get it back as it was?  Here is a screenshot of what I see now:

  

  Hello

  Same thing: the printer will print saved/downloaded PDF OR file you need to open the PDF files under a reader such as Adobe reader pdf. The file in your screenshot is NOT a pdf file.

  Update: Let's ' make me a bit cleaer. The screenshot page isn't a PDF only the PON. If you want to print the PON, you need a save, then print or (b) on the PON and pdf reader opens and you can print it from there.

  Kind regards.

• The contents of the folder WAV files will not work unless the folder is on the desktop.

  Re: Windows Vista Home Premium 32 bit W/sp2 installed.

  I created a new folder for Wav files and set it on my desk until I was finished downloading the files for convenience purposes. I then used them to slightly change the default sounds for different commands, events and others. Everything worked fine until I moved the folder on the desktop to another location. Files located in the folder assigned and uncorrupted but will no longer work when the event or the command is enabled. If I move the folder to the desktop everything works well again. No error or anything are reported. The files in the folder will simply not work unless the folder is on the desktop. Is that all I could do to fix this?

  Hello

  1. what happens when you play the file from another location, you receive error message?

  2 - is that happen with some .wav files or all files?

  3. did you try copied the contents of the file and save it to another location and check the number?

  Step 1: Restart the computer to boot to verify if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

• History of the files do not save all the data

  I've been running historical files for a few days now and it doesn't save any of my content. I have a single directory that contains all of the staff. Then the subdirectories under music/pictures/documents, etc. I think that this arrangement would be ideal for her, but missing all my documents.

  Secondly, please adjust the cache size to more than 20 percent of the disk offline. I have a separate hard disk for this task and it makes no sense I don't have the option to put 100% of the space.
  Thanks in advance for your help.

  Hi Artie,.
  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you are not able to back up all the content by using the history file.

  To solve the problem with the file history, you can follow these links
  (a) how to use the file history
  http://Windows.Microsoft.com/en-GB/Windows-8/how-use-file-history

  (b) storage space: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/storage-spaces-pools

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• My PDF file will not convert in Powerpoint-

  I get an error message saying that my storage limit has been exceeded and to remove the files online but I have no file online.

  I can document a Word doc, but not Powerpoint. What I am doing wrong?

  With the help of a new PC laptop.

  Hi philc49089421,

  I see that you have the subscription for export to Adobe PDF format. To convert PDFS into power point you must have the subscription for the full Adobe PDF pack, or you must have the Acrobat application.

  It will not work with subscription Adobe export in PDF format.

  Kind regards
  Nicos

• Online PDF form will not save edited info

  I created a number of pdf forms active, editable in Adobe Acrobat, DC format for readers to edit users. Then, I loaded the on my Wordpress site for visitors to use. Visitors can change the form and print it out and then right to the browser. However they cannot save the form that they have edited (it will don't save a blank form). They are able to download the blank form, and then edit and save. However, I can't seem to make it work save the form that they have edited while it is in the browser. Help would be much appreciated!

  Hi shannonl88192485,

  I'm sorry this is not possible, you will need to download the PDF form, fill it out & then save it.

  Kind regards
  Nicos

• PDF files will not remove, move

  I use Windows 7 Professional, 64-bit operating system. I use Acrobat X Pro. When I produce a pdf by scanning, InDesign or another program and save it in a folder on our server, we have problems, move the files and delete them after use. When we choose a pdf it stops a moment. If we try to select several files at once, there is a delay until almost 5 minutes. Moving files from one folder to another can take up to 15 minutes for 25 to 30 files. Sometimes, when we remove a pdf document, it reappears. It is a recurring problem with any computer that we use in our society. It happens only with PDF documents. Any suggestions?

  See what happens if you open the task list and stop AcroRd32. I'm sure that there are no 64-bit version. When the reader is closed, it is not to release the file in windows and it is the reason why you can't move it. For more information, you can consult the reader forum which addresses issues with the drive.

• PDF files will not open no PSE 13

  When I upgraded to PSE 13, pdf files would open is no longer the Organizer.  I'm used to be able to do this.  I don't mean I want to modify the PDF (I have not), but I don't want that I just want to see the content.  It's cumbersome to go back to my original file folders to find the file and open it upwards from there.  How can I open it from the Organizer as I used to be able to do in previous versions of the EP?

  Try to reinstall the adobe reader software.