Only 24 controller in a group of mobility?

Similar Questions

• Groups of mobility between...

  Hi experts,

  I am managing WLC 3:

  1 WLC 2112 - code version 7.0.235.0

  2 WLC 2112 - code version 7.0.235.0

  3 - WLC 5508 - version code 7.6.130.0 (new purchase)

  Is possible to group the WLCs 3 in a group of mobility

  No, it is the recommendation of Cisco, but still 7.0 can work with 7.6 in the same mobility group. So you should get these worms upward in the same group of mobility, although this isn't the recommended best practice (but keep a migration strategy to move away of series 21xx).

  Note that you must put all your AP to the same mobility group THAN if the user moves between these APs & you don't want to drop their roaming sessions.

  So if you have APs in various buildings, you have no coverage wireless between the buildings, I worry not put them all in the same mobility group.

  Identify the geographical area where AP are close & customers wander in, put them on a group of mobility.

  Hope this clarify your query.

  HTH

  Rasika

  * Pls note the answers useful. *

• Way to do so only certain people can call groups

  I was wondering if there was a way to make sure only certain people/roles can call a moderate group of Skype. Thank you

  I thought about it

• driver for Ethernet controller for fujitsu simens esprimo mobile v6515 on windows xp

  Can someone help me with a driver controller ethernet for fujitsu simens esprimo mobile v6515 with windows xp? Is there a universal driver for ethernet controlor, or is there a driver that works on this laptop?

  Hi ChrisDB16,

  Search for it here:

  Click on mobile devices.

  http://support.TS.Fujitsu.com/download/index.asp?LNG=com&Level1=20955&LNID=117

• TouchEvent only will not work properly with two mobile fingers

  Hello

  I'm not quite sure what the problem. My code running, sometimes, this mobile finger 1 causes actions that could only be triggered by moving the finger 2. When mobile fingers 2, then, further actions are triggered, which could be invoked by the 2 finger, so it seems to be a bit strange. It's also a little messy to debug. Anyone ideas? Is this a case for the Issue Tracker?

  
      private int lastX1;
      private int lastY1;
      private int lastX2;
      private int lastY2;
      private int lastAngle;
      private boolean fingerOne = false;
      private boolean fingerTwo = false;
  
      boolean touchEvent(TouchEvent message) {
  
          switch(message.getEvent()) {
  
          case TouchEvent.DOWN:
              if(message.getX(1) > -1) {
                  lastX1 = message.getX(1);
                  lastY1 = message.getY(1);
                  fingerOne = true;
              }
              if(message.getX(2) > -1) {
                  lastX2 = message.getX(2);
                  lastY2 = message.getY(2);
                  lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  fingerTwo = true;
              }
              return false;
  
          case TouchEvent.MOVE:
              if(message.getX(1) > -1 &&
                      (lastX1 != message.getX(1) || lastY1 != message.getY(1))) {
                  //do some action here
                  lastX1 = message.getX(1);
                  lastY1 = message.getY(1);
                  if(fingerTwo) {
                      lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  }
              }
              if(message.getX(2) > -1 &&
                      (lastX2 != message.getX(2) || lastY2 != message.getY(2))) {
                  lastX2 = message.getX(2);
                  lastY2 = message.getY(2);
                  final int lastAngle = this.lastAngle;
                  this.lastAngle = Fixed32.atand2(lastX1 - lastX2, lastY1 - lastY2);
                  final int rotation = Fixed32.toRoundedInt(this.lastAngle - lastAngle);
                  //do other action with rotation here
              }
              return false;
  
          case TouchEvent.UP:
              if(message.getX(1) > -1)fingerOne = false;
              if(message.getX(2) > -1)fingerTwo = false;
          }
  
          return false;
      }
  

  I'm not sure what the problem is that you meet, but there is a problem with the TouchEvent return incorrect values if the two points of contact Cross (IE if you touch the left and right of the screen and then move your fingers together, once they cross the X 1 value will now follow the finger instead of finger 1 2).

• Creating groups of mobility with 4402

  I am looking to place three 4402 controllers of production in the same mobility group.  Currently, there is no mobility group.  My question is, will this affect somehow customers when I add the controllers to the same group?  I'm sure not, but I wanted to just make sure.

  Yes, you're right, it will not adversely affect the customer.

  #Mobility Group is useful for roaming, anchor and AP aid smoothly. WLC restart is not required to add/configure mobility.

  #If you have similar wlan configured on all these customers and 3 WLCs tried to roaming, it probably makes roaming with delays dhcp failover. Given that it is already harming those clients, feel free to set up mobility.

  #If APs on these 4402 s sharing RF so don't forget to set up similar groups of RF to avoid each idetifying APs themselves as thieves.

• Restrict a user/group to allow access only to specific shared services groups

  Hello team,

  I have EMP 11.1.2.2. I created different groups) a ' Admin_groupA') b ' App_groupA' c) "App_groupB" under the native directory. I have configured Shared services-> administrator to this 'AdmingroupA '. Those who belong to this group "AdmingroupA" is able to add a new user to the directory of companies to provide access to the group 'App_groupA '. But I don't want the users of 'Admin_groupA' to access 'App_groupB '.

  Since I put in service Shared services administrator privelge to this group of "AdmingroupA", "AdmingroupA" users are able to access "App_groupB" also. Can you please let me know how I can limit 'AdmingroupA' to provide access to users to the group "App_groupA".

  Thank you for your valuable contributions.

  You said, as you have configured administrator privileges of shared services to this 'AdmingroupA '. I don't think that you can restrict the user from this group to provide access to other users.

  ...

  Did you hear about delegate user management? Managing Director can view and manage only those users and groups which they are responsible. Good read on the your hss version Administrator's guide and see if it helps!

  See you soon

  BP

• Immediate refresh of the cache read-only with autorefresh incremental on group

  I work with a group of read-only cache that was created like this:
  
  Create group readonly TT_SOME_TABLE cache
  AutoRefresh
  differential mode
  interval milliseconds 300000
  State on
  Of
  () UNE_TABLE
  SOME_COL_1 NUMBER (11),
  SOME_COL_2 CHAR (1),
  SOME_COL_3 varchar (8) inline non-null,.
  PRIMARY KEY (SOME_COL_1));
  
  In normal use, the auto-refresh every 300000 milliseconds (5 minutes) is good - but in a particular scenario I want to manually force an immediate update of the Group cache from the command line.
  
  The following two commands in ttIsql do the trick:
  
  command > alter cache group tt_some_table set autorefresh State suspended;
  command > refresh cache group tt_some_table commit all 256 rows.
  
  However, the Refresh command issues a response message "21 cache of the authorities concerned.". This is the total number of lines, oracle holds for une_table, whereas before the update I've only updated 1 row. This makes me think that my manual refresh is not progressive. Am I wrong? On the plus side, the Refresh command switches the autorefresh return State on 'on' which is useful.
  
  Is there a better way to make an immediate update on a group of cache that is normall auto-actualise?. Can be done more?

  Manul LOAD / REFRESH is always a complete refresh rather than a differential (they work by different mechanisms). There is no way that I know to force an immediate refresh of incremental. You can try setting the AUTOREFRESH State pause and back to on. That could force an immediate refresh, but I have not tried so I do not know whether there will be.

  Chris

• Only I have access to Firefox for Mobile and need to add a new device.

  Is it possible to use your mobile phone to add another device? The device seems to be an obvious tool to be able to add another computer - travel in particular. His absence here is problematic for many reasons.

  If I understand you correctly...

  You must have access to the 'new device' in order to add this device.

  For example, you cannot add your desktop PC to your portable device Sync when you're on vacation. You need Setup Sync on the desk before you left on vacation.

• How can I connect my xbox 360 controller to my iMac (last updated: mountain lion)? I bought star wars force unleashed on AppStore and it said only 360 controller can be used then, how can I connect to my mac? I have the wire on the load control

  I bought star wars power of the force on the apple app store. It says that i can use the controller to xbox 360 to play other than keyboards. now how to connect the controller 360 for mac? I have the charger cable to connect to the controller that has a usb key that I have connected to my iMac (desktop), but this isn't like the ps3 where he worked. Help, please! I have the latest version of the update of the iMac, which I believe is the mountain lion

  Not sure if this will help. Here and all over the web search will show that you mixed results.

  Try this download. I have a new Macbook Pro El Capitan 10.11.3 running. Just installed this to use my old Xbox 360 wired controllers USB to play Lego games. Despite the mixed reviews, this seems to have worked perfectly and actually gives you an ability to customize the controller.

  Al https://github.com/360Controller/360Controller/releases/tag/v0.15_beta5_unoffici

  NOTES:

  (1) it is Beta version 5; newer than all the other versions of this utility I saw reviewed about the feature. You may need a different version because your version of iOS, but I'm not an expert here.

  (2) once installed and the computer restarts, you will find the utility as a new icon in the system preferences (the gear in your dock icon, probably), not applications, utilities, etc.

• The creation of "choose only one" controller?

  Hello.. I'm new here...

  I want to create a control panel with the following functions.

  -Control Panel consist of 5 components inside

  -If I choose 2 LED, occur [action 2]

  -If I choose 4 LED, occur [action 4]

  and etc...

  now my problem is... When I click on LED 2, it performs [action 2]

  but when I click on LED 4 in order, 2 LED light is always on.

  (The concept, I want, that.. .when I click on LED 4 in order, 2 LED will automatically turn off, 4 LED lights)

  I want to say that only ONE option can be chosen during the operation.

  any idea?

  Yes, there is a control called radio BUTTONS. fits your expensive application.

• Export only the desktop version of the site, mobile version not

  Can I export just the desktop version of my site and not the mobile version with it? I am busy working on my still of mobile site, but the work is done on the office site which must go live every day.

  Hello

  You need to do 2 things for it.

  1. click on 'office redirection' of site properties to remove the exported files of redirection codes.

  Do please go to file > Site Properties > provision > phone > uncheck "Desktop Redirection"

  

  2. after the export of the site in HTML format, delete the folder named like 'Phone'that contains all your phone configuration files. Rest of the files are for desktop PC.

  Concerning

  Vivek

• Download dreamweaver only from design premium CS5 group...

  I just need Dreamweaver redownloaded... Don't have the CD anymore... I tried to download Dreamweaver only, but he said that the registration number is incorrect... I don't want to download the full package... the rest works fine... help!

  It is not possible. Packages now need to use the installation of the suite programs. You must download the entire Design Premium.

  Mylenium

• 2 5508 a mobility-group autonomous migration

  Hey everybody,

  for some reason, our wlan controllers were built up to be independent instead of beeing a mobility group.

  I would like to change that in order to be able to use all the features of the AH.

  Let me describe our scenario:

  two WLCs 5508 running SW worm. 6

  -same subnet

  -the two are running in mode master controller

  -different host names, ip addresses, etc.

  -all settings for the local wireless networks and AP-groups (except the APs themselves to these groups) are the same

  -altogether now, we manage approximately 100 configured on WLC #1 half rounds, the other half on WLC #2

  I don't know exactly why, but when that adjustment has been installed, someone already configuredHA for each access point...

  for example:

  -AP #1 WLC #1 WLC #2 secondary primary

  -AP #2 WLC #2 WLC #1 secondary primary

  but without WLC #2 configuration for AP #1 knowing that it would be foolish, correct?

  so my question is: How can I do the migration under the best conditions?

  is it easy as:

  -disable the master controller on WLC #2 mode

  -Configure the two WLCs in one group of mobility

  --> WLCs negotiate their configurations for the APs

  and everything is fine after that?

  Comments appriciated. ;-)

  rgeards, Manuel

  First OFF... master controller mode.  Then veriftywhat ap should serve as wlc #1 as the principal and wlc #2 of high school.  Configure the belgo-chinois mobility to have the other wlc and ensure that relief ap is activated.

• Requirements of the mobility for the comments of anchor WLC group

  Hello-

  I always assumed that you cannot create a tunnel between a local WLC and an anchor WLC comments that are in different groups of mobility.   However, I was told recently (no more details) that it is possible.  So I put to test this.

  I'm trying one of my local WLCs SSID comments point to an anchor of WLC comments in a different group of mobility.   I have a forthcoming maintenance window and I'm looking to anchor clients on a campus at anchor WLC on the campus on the other for the customer service does not lower.   Each campus is that it's mobility group.   Trying to set up I went to the "mobility anchors" screen for the SSID guest on one of the local WLCs and I cannot add anchor WLC on campus on the other because it is not in the drop-down list.  This is because it is not in the same mobility group.   So my question is how do customers of anchor across a local WLC in a group of mobility to a WLC anchor in another group of mobility?

  To me it seems not possible without major configuration changes.   I don't want to reconfigure / rebuild mobility groups.

  Thank you

  Chuck

  Not only is it possible, that I recommend. However, you can be confusing to some concepts.

  The mobility group is different from that of the field of mobility.  Generally, I am referring to group mobility as these WLCs with the name of the default mobility group and the field of mobility than the entire list of mobility (where you can set up to 72 controllers belonging to various groups of mobility).

  The point is that GroupA and WLCs of to WLCs 1-10 11-20 are GroupB, anchor to work, you at least need to add anchor to the mobility list wlc abroad and vice versa.

  If you notice, when you add an entry of mobility to the list, it should ask you for mobility group. If you leave this field empty, it must default to that of the WLC, but on controllers GroupA, you could define GroupB controllers (and specific group b) and then you should now have the mobility between your controllers and configuration of the anchor will be your anchor in the menu...

  Who is?