Similar Questions

• How can I automatically populate the date field after only one "digitally signs" a .pdf form? Help, please! Thank you!

  How can I automatically populate the date field after only one "digitally signs" a .pdf form? Here's a sample:

  _ Digital Signature___ (signs), Date (Auto-remplit)

  Under field properties of the signature on the signature tab, you can use a custom script, like this:

  this.getField("Date").value = util.printd ("mm/dd/yyyy", new Date());

  You know, however, that a digital signature always displays the date and time, it has been applied?

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• How do you get the screen message appears only one for each case?

  Hi friends,

  I'm here with another question...

  I built a VI that must contain 6 boxes, when a particular check box is selected by the user, it should display a message to the user that the checkbox is enabled.

  My problem is: when I select one of the boxes the on-screen message continuously one after the other, even when you press the OK button.

  Can someone help me please?

  An option button allows only a boolean in it to be active at a time.  You see these things all the time.  Think about a survey that only lets you select one option.

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• set the printer to print only one page always

  I have a HPlaserjet MFP 1005. I want to put to print only one page which isusually necessary. How do I?

  Hey @neelp,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you try to set your Laserjet P1005 MFP always print one page only. This isn't an option through Windows PC or Apple, but there are two ways to work around this problem. The first would be to pay attention to what is being printed by activating the mode print preview before you print. The second solution would be to have only a sheet of paper in the printer at any time.

  If you have questions about the verification of print previews please let me know which operating system you use on your computer but also what program you use and I see if I can help you with that. If you are not sure what your operating system is you can click here to find. Even if you have any other questions please let me know.

  If this solves your problem then please let other users of the forum know clicking on accept as a Solution.

  I hope this helps and I hope you have a great weekend!

• HW 2 get the value to select only one option selected by the user in the bean support

  IAM using the select only one option button that is filled during execution.
  
  I want to get the value selected by the user of a choice selection in the bean to support for other operations of... .IAM using this method, but I got a null pointer exception.
  
  Public Sub test (ValueChangeEvent tokenChange)
  {
  Integer tokenIndex = (Integer) tokenChange.getNewValue ();
  DCIteratorBinding tokenListIter is getBindings1 () .findIteratorBinding ("TokenIDVOIterator");. in this line null pointer exception
  Token of the line = tokenListIter.getRowAtRangeIndex (tokenIndex.intValue ());
  currenttoken = (Number) token.getAttribute ("TokenId");
  System.out.println ("token ID selected:" + currenttoken);
  
  }
  
  I want to know if there is any method to get the value of the value selected by the user to select a choice...
  
  pls help? //

  3 words:

  "research on the forum.

  asked and answered countless times.

• tapping on a track from the album will play only one continually

  Tapping on a track of the album reads that a continally

  You have certainly repeat turns. From the Manual:

  Play music

  Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  • Press on to move to the next song.
  • Press on to return at the beginning of the song.
  • Double click to play the previous song in an album or a playlist.

  

  Skip to any point in a song. Drag the playback slider. Decrease the speed of friction by sliding your finger to the bottom of the screen.

  Share music. Press on , then choose a sharing option.

  Shuffle. Press on to play your songs in a random order.

  Repeat. Press on to repeat an album or a playlist. Double click to repeat one piece.

  More. Press on for additional options.

  If still problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• When I connect the wi - fi, 1 only one computer can access it, and my computer does not work.

  I have to plug the ethernet cable directly into the ATT modem for computer work, so when I hook back in ethernet cable to a Linksys wireless modem, computer at home does not connect & only 1 laptop in the House connects to the time? When I'm addicted to the Wi Fi & will not work my computer at home, I click on the tab "run diagnostics" and he teaches me something about my IP address, but it is impossible to remedy. And my son can't use his laptop or his XBOX live when my daughter is on her cell phone and vice versa.

  Very frusterating! It worked just fine and then one day suddenly it happened. I called Att which is my DSL connection and there is nothing wrong with their modem or with the connection to att. I even bought a new linksys modem that has the wireless and the modem router all-in-1 and had the same problem. Help! I can't ask Dell toll-free because my warranty has expired.

  It's as if the computers are in competition with each other for internet access!

  Hey Sandra0lynn,

  I moved your thread to the Internet Explorer for Windows Vista - networking forum forum and marketing online.

  It seems that either DHCP has been disabled on your router and/or all your computers are set to use the same IP address.

  First log into your router and verify that DHCP is turned on or enabled. If you need to know how to connect to your router and check this option, you will see the user manual or online help supplied by the manufacturer of your router because steps varies from a manufacturer (as well as models).

  After that make sure you that DHCP is enabled, the next step will be to IPv4 each computer and IPv6 resolves to get automatically. To do this, take a look at the procedure in the below link and select obtain an IP address automatically for both types of connection.
  Change TCP/IP settings

  Hope that helps.

• With the help of LPX 10.2.2 do a song with 6 midi channels. The editor now displays only one channel, any track I've highlighted that this track midi notes in particular will appear. Can anyone help? Thank you.

  LPX 10.2.2: I'm doing a piece with 6 midi tracks.

  The editor only displays the Track5 any track I've highlighted. Cannot change other tracks.

  Can anyone help? Thank you.

  You select the track header, or you by selecting the region in this way you should be?

• I forgot the admin password, can only one computer access through standard account...

  yesterday (September 3) around 07:00 I change the password of the only admin account and today I kinda forgot about that... and the only way to access what is on the computer with the standard account only... is any way to retrieve or reset the password before sept3? need help please, I have really important things there and I need to work on it as soon as possible...

  I'm sorry, but you have received the information from Microsoft available.

  Try a local computer repair shop.

  Vista and Windows 7:

  http://support.Microsoft.com/kb/940765

  If the above does not help you:

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• SQL Query to retrieve records in a table with the same records or only one record in a table

  Hello

  Got a curious requirment to extract the Non-distincts records in a table

  Example of

  Account number	Type of account
  12345	SB
  12345	SB
  12346	CR
  12346	SB
  12347	SB
  12348	CR
  12349	SB

  Requrirement is to retrieve the records as follows

  Result must be

  Account number	Type of account
  12345	SB
  12345	SB
  12347	SB
  12348	CR
  12349	SB

  You will notice that 12346 which has two separate lines have been eliminated in the result. I tried several qeries to achieve this result, one or the other had a few mismatch. Can someone give me a request for it.

  Thanks in advance.

  SELECT ACCOUNT_NUMBER,

  ACCOUNT_TYPE

  DE)

  SELECT ACCOUNT_NUMBER,

  ACCOUNT_TYPE,

  COUNT (*) ON CNT_ACC (ACCOUNT_NUMBER PARTITION).

  COUNT (*) ON CNT_NUM_TYP (PARTITION ACCOUNT_NUMBER, ACCOUNT_TYPE)

  FROM T1)

  WHERE CNT_ACC = CNT_NUM_TYP;

  exit;

  12345	SB
  12345	SB
  12347	SB
  12348	CR
  12349	SB

• my HP photosmart e - all in a series of 5512 will not analyze later photo or document of the printer.will scan only one point to an email

  cannot accomplish the info in "title" above.  have tried all aspects of troubleshooting etc.etc.

   

  Hello

   

  (1) which is the application that you use to print and scan from the printer?

  (2) deal with this issues with applications included (WordPad or Notepad)?

  (3) what are the troubleshooting steps you have done?

  Please answer us with more information about the issue to help you.

  Install the last set of drivers on the manufacturer's Web site and check:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5063611

  I hope this helps!

• Choose only one value a value I

  I have a list of a choice selection
  When I want to get the value of the list
  01 link bean
  02 get the list index
  03 list Iterator
  04. get the value at that index of the iterator
  This is the code I am using

      Object listIndex = myList.getValue()
      DCIteratorBinding binding = ADFUtils.findIterator("listIterator");
      Row atRangeIndex = binding.getRowAtRangeIndex(listIndex);
      Object attribute  = atRangeIndex.getAttribute("Id");

  but I have a problem when I try to update the list this value
  I have the attribute
  ID
  
  I want the list to this attribute when I open the page or when I press the button
  in another meaning when I press the button select a choice select this Id
  How can I do that.

  Generally to the LOV you would list on the attribute binding,
  as you the value that must be set for the LOV
  (1) create the attribute for the LOV attribute binding
  (2) the value for this attribute binding.
  3) ensure you have PPR and the partial target defined in the code so that the change is reflected.

  Detailed procedure:

  Create a binding for the LOV component in the managed bean:

  Private RichSelectOneChoice departmentLOV;

  {} public void setDepartmentLOV (RichSelectOneChoice departmentLOV)
  this.departmentLOV = departmentLOV;
  }

  public RichSelectOneChoice getDepartmentLOV() {}
  Return departmentLOV;
  }

  {} public void setNewValue (ActionEvent actionEvent)
  SUPPOSE THAT THE VALUE OF THE DEPARTMENT MUST BE SET TO 50
  Long departmentId = new Long (50);
  this.setEL ("#{bindings.") DepartmentIdAttribute.inputValue} «»
  departmentId);
  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.departmentLOV);
  }

  UN Private Sub (String el, Object val) {}
  FacesContext facesContext = FacesContext.getCurrentInstance ();
  ELContext elContext = facesContext.getELContext ();
  ExpressionFactory expressionFactory =
  facesContext.getApplication () .getExpressionFactory ();
  ValueExpression exp =
  expressionFactory.createValueExpression (elContext, el,
  Object.Class);
  exp.setValue (elContext, val);
  }

  In the file PageDef,.
  
  
  Use = "LOV_DepartmentId" id = "DepartmentId" DTSupportsMRU = "false" / >
  
  
  
  
  
  

  Thank you
  Nini

• Why Lightroom does not change the creation date of the file? (Mac OS)

  I find that Lightroom changes the creation of files present during the incorporation of metadata. I noticed that this behavior is different from the bridge, which reaches to write metadata changes to the file without affecting the creation date, affecting only the modification date.

  I read in other threads that it doesn't matter when even because moving files between disks will write a new file and, therefore, a new date of creation, but if this can be true in some systems (I don't know) is certainly not the case with Mac OS. For example, I have files dating back at least 1998 which have been moved from disc to disc to disc but still retain their original creation date. Which is as it should be. For many of my older images, there seems to be no capture embedded recognizable don't date anyway, so the creation date of the file is the single timestamp.

  It seems quite logical that the modified date of a file must be updated to take into account that the file has been modified (for example if adding metadata), but it seems to make sense that the date of creation of the file should be kept as the date, this file has been created. Changing them both on the same date seems to be a needless loss of information.

  Some would say that the process of adding metadata to a file creates a new file, the creation date must be updated to reflect this. But I would say that the creation date should be which would include a normal user as the creation date. We do not expect the creation date to change everything simply because a file is rewritten to the disk (for example when the defragmentation), however technically accurate, it would be to say that it is a newly created file. And the difference in behavior between Bridge and Lightroom shows that there is some confusion on this subject.

  Photo software ignores generally the operating system created by file-modification dates, and when he is not ignoring them, treated generally in a non-standard way that varies from one program to a program.  Rather than rely on the dates of the files of the operating system, the photo industry has defined fields of metadata with all sorts of specific photos dates: capture date/time (when the shutter button is depressed), date/time of scanning (when a movie or a print image was scanned digitally), date/time software photo altered image or metadata date/time of GPS location.   While some photo software will attempt to maintain the dates of file-created and - updated, many programs and services Web will not (including, but not limited to, LR).  In addition, many utilities files not always to preserve created and set dates to day that you move, copy it, backup and restore files.

  Therefore, I highly recommend that if you care photo dates and times (as I do), so no matter which photo software you use, you store the dates of capture in pictures industry standard metadata by using the tools provided by LR and other photo software.   In this way, you migrate the program to the program over the years, are you more likely to preserve that important metadata.

  Old photos and scans without that metadata, when you first import into LR, LR will assume that the capture time is the hour of the modified file.  LR to rewrite the date of capture of metadata in the file by selecting and making the metadata you can do > edit Capture time, clicking OK and then by metadata > save metadata to file. You can do it in batch - choose all your old photos and make metadata > edit Capture time, click OK, to metadata > save metadata to file.  LR will affect its time updated each file capture time.   If you want to set the time captured in the file create time, select this option in the window change the Capture time before clicking OK.  But beware that many Windows and Mac file utilities cannot preserve create time, even if they retain changed time, in order to create your files time can be wrong.   And of course, make sure that your backups are up to date and valid before making any new procedure file with which you aren't familiar.

  But if you really want to use non-standard file dates to keep your metadata information, and you want Adobe to modify accordingly the LR, so please give your opinion and vote on it in the Adobe official feedback forum: Bug report: Lightroom modifies the image files creation date. This forum is a user forum in which is rarely involved Adobe, Adobe said they read every post in the forum comments (and sometimes they respond).