Only add time to date.

Similar Questions

• can anyone help me find an app for the Zeen which has just the time and date? Don't want to google.

  I don't know how to use the apps since all I found is on android, but apparently the Zeen is not compatible with the android apps.  I have google calendar, but it doesn't work and want to only the time and date is displayed.  I followed all the directions for adding applications, but they do not work or I can't understand them.

  Salvation of theeagles,

  The Zeen is unable to access the Android Market, but it's an Android device.  There is a market for this called SlideME, and you should have the icon for it in your apps section.  I have a station also, and I'm just a normal clock on mine.

  Here is a link to SlideME, if you want to see what applications are available: http://slideme.org/

• The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

  Can someone bring me (Labview is new to me) in the right direction?

  John

  See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.

• How to add between a date range + category

  I use numbers 3.6.2 on a macbook pro with El Captain 10.11.5

  I have a financial spreadsheet that I want to shoot the numbers a second sheet that has a book running.  Ideally, I would like to have a book current running year round.  I can't figure out how to write a SUMIFS formula. For example, I want the cell to add the numbers between 1 August and 31 August which are "local contributions.

  Then, I'll have another column for September and I want the cell to make all contributions local between 1 September and 30 September... etc.

  Thanks in advance.  I hope I explained it well enough.

  

  

  Hi zaphron,

  How is your document organized?

  I see a few possible sticking points and have some questions about the entire organization.

  Column D of low table contains three types of data: text time values ('Dates', ' Check # ") and numbers.

  Pick-up points are not dated.

  Some categories are listed in column A, others in column B in the summary table, which complicates the construction of the status of the category.

  1st row seems to contain a single merged cell. Numbers doesn't handle well merged cells and general advice in this forum was to avoid if possible.

  On the upper table (summary), the cells containing the month and year appear to contain values of time, put in shape to show only the month and year. If so, the values in these cells can be used to compare with the dates in column D of the overall picture as one of the conditions SUMIFS.

  How many times the third tab/sheet is duplicated to create a new worksheet "power book"? (The label in line 1 of table book suggests it happens once a month, with a new race of ledger sheet (and table) for each calendar month).

  Are there duplicate names in the categories for items of products and expenses? (for example. 'Various')

  The General form of SUMIFS by category, date or after, dates before three conditions is as follows:

  SUMIFS (sum of the values, test values, condition, test values, condition, test values, condition)

  For arrays. the formula in the column of June 2016 of the summary table, then filled to the bottom, would be:

  SUMIFS (RL::TI: $H, RL::TI: $F, "="& $A and $B, RL::TI: $D, "> =" & I$ 1, RL::TI: $D, "<" & EOMONTH(A1,0) will GET (I$ 1.0) + 1)

  To compact the formula for display here, I used only initials for names of journal and the Table where they are needed. Replace with the actual names of the sheet and the table in each case.

  RL = accounting running

  T1 = 1 Table

  I have$ 1 is the address of the cell (I1) on the summary table containing the Date/time value June 1, 2016 00:00:00 (entered and displayed as June 16).

  $ is the operator of absolute reference, which retains all the column references (with the exception of 'I') locked when columns are added to the summary table and the part of the line of the I2 (eye-2) reference fixed rank 1, the formula is filled down his spine.

  EOMONTH(A1,0) will GET (I$ 1.0) + 1 calculates the value of time of the last day of the month in I1 and adds a day.

  The formula has not been tested, but should work on the income of the values is the table indicated in your post and return 0 results (or error triangles) for categories of lines until the dates are given in these lines in column D of the running of the expenditure accounting table.

  Please click once on the triangles of error to display the message and report to those in a response.

  Kind regards

  Barry

• My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

  I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

  Any suggestions on getting my TC back up?

  One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

  A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

  Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• Time and Date on Portege 3490CT...

  Hello.

  Is it possible to set the time and date settings in the BIOS somehow?
  I'm tired of setting the time and date on my windows every time that I reboot or turn on my computer.

  I hope someone can help!

  Sincerely,

  Daniel A. Johansen aka SiLverFerret

  Hi Daniel,.

  If you have set the date and time every time that you start Windows, so I think that your CMOS battery has expired. It is a small battery used only to keep the parameters of the BIOS (including date and time).

  Normally, the CMOS battery recharges when the laptop is connected to the power supply.

  I would recommend that you contact a Service partner to get your replaced CMOS battery (it is normally attached to the motherboard).

  HTH

• I need my Vi to save only one point of data every 30 seconds

  Hello

  I have trouble getting my VI to make only one point of data every 30 seconds. I collect a couple and the temperature. If you take a look at the queue of lvm, you will see that I have two data points every 30 seconds. I want only the VI to take one. I can do this by going to the DAQ assistant and change the mode of acquisition of N samples 1-sample (on request), but if I do this I am not able to see my couple of graph in real time.  In addition the VI takes data about every 30 seconds. Is there a way I can strengthen this also?

  1. change your graph of couple to be a graph.  A graph has a history associated with him, so he keeps old values in a circular buffer for you.  A chart shows just the last thing written in it.

  2. change your sample of Compression to be 64.  It is currently set at 30, which means that you will end up with 2 samples in your data.  That's why you write 2 samples when write you it.

• Get correct time and Date data in DIAdem data 11 PDM LabView

  I have a handful of files large tdms (9 million data points) collected with LabView that I need to extract elements from and export to a text file, with time string data.

  I use DataFileLoadSelect and the option to register, and then DataBlCopy in bring in a segment of data at a time, but I'm having convert explicitly each time value of a time base of LabView (01/01/1904) to the time base DIAdem (01/01/00), not to mention the offset, before writing the date-time as a text string - it really slows down the process.

  I ' t hit me that DIAdem (11.1) has got to have a way to correctly read the timestamps of LabView, but I'm a newbie to tiara, so any suggestions would be helpful. And no, I don't have LabView LabView installed locally, using a vi is not an option for me.

  Thank you

  Eric

  Hi Eric,.

  I saw your second post after I have posted my first answer.  Your second post has indicated that the main issue was the value of date/time of departure in tiara.  All versions of DIAdem, waveforms of support (10.0 - 11.1 currently) by default to hide the start time of each waveform absolute in an invisible property.  It is responsible, but you'd never know it by scanning the table of properties in the data portal.  Idea of R & D with this implementation is that most people will want to look at the relative time of the wave, and they were still hiding this "wf_start_time" property so that users would be confused by the inconsistency between what is displayed in graphic form and what they see in the properties of the data portal.  They have certainly achieved their goal, but only for customers, they had in mind.  It only that exacerbates an already frustrating problem for your use case.

  But there is a way to read this date/time property invisible absolute beginning and create a channel of date / time that you need for ASCII-output - I join you two examples below.  If you need to be more focused on the shifting geography, so I recommend the ChnLinScale() function instead of the calculator - channel, it should be even faster.

  Hope this helps,

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• Datalog writing can only add and not replace plug

  I noticed that writing Datalog function only adds data to an existing datalog and has not replaced the record set by Datalog set position. It is very strange, is this normal or I missed something?

  

  Hi Zigbee1,

  According the context help on LabVIEW, the function Datalog Write "sets the current position of the datalog to the end of the file before writing".
  He explains also in the link below that you cannot replace a record after LabVIEW wrote in a datalog file.

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvconcepts/fileio_datalog_files/

• Windows 7 - time and date always reverts to December 31, 2001

  Whenever I start my computer (after a power down) the date and returns the wrong time and date.  The date is December 31, 2001 and the time is 11:? H. Ce that is the cause? It only started a few days ago.  What can I do to fix this?

  I'm guessing that you have a desktop computer that is old enough?

  I think that the problem is caused by a small button battery in your computer that needs to be replaced.

  1. If you you disconnect the power supply to your computer

  2. Hold the button for 7 seconds

  3. Lay the computer on its side with the side where the wires are down

  4. Remove the side panel

  5. By peer in there and you'll see a shiny silver battery about 1/2 "in diameter.  It's the battery

  6. Go into any store and buy a 2032 button battery.  They cost less than $5

  7. Find a very small screwdriver flat blade (like that used for glasses)

  8. Very gently, loose battery.  It will pop up, so be ready to grab.

  9. Press the new battery with the markings embossed on the top-side facing you.

  10. Close the side panel

  11. Replace vertical

  12. Start the computer

      He now has to have the date and time together, but once more - at least for this 5 years.  You have to press F2 at startup to get to the place where the date and time are stored.  Equip date and current time. It does not use the mouse only keyboard.  This includes the way it tells you to save what you were doing.  You can hear the ROAR more and blowing so that some things is again set up.

      Once Windows is all set up:

  1. Click once on the date/time in the lower right

  2. Click change date and time

  3. Click time Internet

  4. Click on change settings

  5. Select time.b.nist.gov and click on the Update button - it synchronizes the clock of the computer with the US govt time system labs

  6. Close

     You are all fixed.

• Problem of time setting Date DateField

  Hello.  I know I posted simillar in the past but now encounter the problem with what I think is linked to time zone.

  When I use the following code to set the time and date in a DateField leave a string I get the inconsitent results...

  DateFormat df = new SimpleDateFormat ("YYYY/MM/dd HH: mm");
  java.util.Calendar d2 = java.util.Calendar.getInstance (TimeZone.getDefault ());
  String date = ' 11/11/2011-14:11.
  yy int = 0, mm = 0, SD = 0, h = 0, e = 0;
  mm = Integer.parseInt (date.substring (0, 2)) - 1; January = 0
  DD = Integer.parseInt (date.substring (3, 5));
  YY = Integer.parseInt (date.substring (6, 10));
  HR = Integer.parseInt (date.substring (11,13));
  MI = Integer.parseInt (date.substring (14.16));
  D2. Set (Calendar.YEAR, AA);
  D2. Set (Calendar.MONTH, mm);
  D2. Set (Calendar.DATE, dd);
  D2. Set (Calendar.HOUR, human resources);
  D2. Set (Calendar.MINUTE, mi);
  D2. Set (Calendar.SECOND, 00);
  D2. Set (Calendar.MILLISECOND, 00);
  D2.setTimeZone (TimeZone.GetDefault ());
  long t2 = d2.getTime () .getTime ();
  _dateField = new DateField ("", t2, df);
  Add (_dateField);

  So will string ' 11/11/2011-14:11 ' to the datefield causes the time spend at 2010-11-12 02:11.  I've set the default calendar time zone doe.  Not sure why this is now occurring.

  Ah my bad, given the first bit and skips the rest! It is possible that you are using the TIME instead of HOUR_OF_DAY

• Change the time and date of deposit when importing

  Hi everyone, when I import images in my project, automatically first change date and time with the current date and time in the finder. So each imported file have changed the time and date when I search in the finder under the "created" or "modified" column, is this normal?. There is no way to avoid this?

  Thanks in advance

  Yes, you can prevent this! Go to the preferences of first and go to the media section. Uncheck "Write XMP IDS to files on import". Boom, done. First will not add his small beacon of metadata files when you import them. This isn't a huge deal for most publishers except Adobe apps could create media Cache files more than necessary if you re - use clips in other projects. Don't forget, however, anything, if you change the metadata (in the project Panel or metadata) file, it'll still change changed data for the clips.

• How to set the time of data collection for information Publisher report

  Hello everyone,

  So, I'm trying to set up a report, which contains some information of tablespace. The report must be sent to my e-mail account around 07:00 every day, so I have an overview if we run into a few problems with some full tablespaces. the report and mail notification works well but my only problem is, the data are not updated. There is a comment under each data table in my report which said that the data had been updated on 8 to 13 hours ago according to the target database. is there a way I can trigger the update of data report on a specific time? So I can update the data before you run the report job every morning around 07:00? I'm totally noob, so I hope someone can help me, I tried to google it but I couldn't find anything useful.

  Unfortunately, there is really no good way to 'schedule' collection for this because it is perceived with a dozen of other data points and likely to cause problems.   What you could do, is create a metric custom extension with query data file you need (simple Dungeon it do not go beyond what you really need to prevent performance problems), deploy the metric on all target databases, then disable collection of gui (metrics and collection parameters) and cron the collection to run at a period determined using emctl control agent runCollection : .   You can then create a report about the data collected in mgmt$ metric_current.

• When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  You should not have a permanent internet connection.  You should only be connected when the software must check whether the subscription is still valid.