Only the C partition on the new Satellite C50-B-14Z

Similar Questions

• On the new Satellite C50-A-19U battery problem

  Hello

  A few days ago I bought a new notebook Satellite C50-A-19U.

  Everything works without problems, except when I unplug the power cable, the battery level goes from 100% to 50% both.

  If I try to charge the phone, battery load normally up to 50% and then spend 50% to 100%.

  Anyone facing this problem?

  Post edited by: tonybp

  I don't really know what may be the problem here. Try to use the battery until it will be completely empty and let it be fully charged again.

  Please watch carefully if the same happens again and send feedback.

• On the new Satellite C50-A-14W battery problem

  A few days ago, I bought Toshiba Satellite c - 50 a - 14w. The accumulator is recharged normally (at 100%), but when I plug the computer in the farm shows that 72% charged.

  This means that the battery is broken?

  Hello

  New battery needs to be calibrated in case to reach full performance.

  To calibrate the battery, you must charge the battery until the battery indicator turn green (or blue). Then disconnect the power adapter and keep the battery discharge until it is completely empty.
  This procedure should be repeated two, three times in the line.

  If the battery charge status would not be changed, even if the battery has been calibrated, you should get in touch with Toshiba authorized service provider to check or replace the battery.

• Satellite C50-B-14Z continue to ask for password at startup from the bios

  Hi guys,.

  My Satellite C50-B-14Z no reason started asking for pssword when starting on bios.
  I don't put passwords and I do not know how to reset. If the laptop is now unusable. Could someone help me please?

  I put t know why the phone asks you to enter the password of the BIOS, but the fact is that the BIOS password can be removed ONLY by an authorized service provider.
  I'm afraid, you will need to contact the Toshiba ASP in your country in order to remove the password of BIOS of m.

• Installation of Windows XP Home edition on the new Satellite Pro L550

  Hello

  I have a new satellite Pro L550 and need to downgrade to XP. If I want to go back to Windows 7 that I can in the future?

  Thank you, Lisa

  Hello Lista

  In my opinion you should look forward and begin using the new Windows7 operating system. It is really good OS, well done and runs with good performance on Toshiba laptops.
  Please note that you have most recent laptop with newer hardware model designed for standards of Win7.
  Yes, you can install Win7 when you want.

  Win7 is fully supported and you won't have any problems with it.
  To return to Windows XP edition family has no much sense to me, except to use some old software designed for Windows XP Home edition only.

  Anyway, what model of laptop you have exactly (L550-xxx)?

• Windows 7 does not start on the new Satellite C660-195

  Hello

  I just bought a Toshiba Satellite C660-195 with Windows 7 pre-installed.

  This morning I turned on it and it came with a black box with x:windows\system32\drvload.exe in it. This box then disappeared and Startup Repair kicked. He then told me that Startup Repair cannot repair this computer automatically. The notice were to remove any device that had recently been attached to the laptop (such as a webcam or music device) but I did not install a hardware or devices. I clicked finish and stop you the laptop.

  I lit it again and it's the same thing (new!)

  A forum would suggest trying the following: click on the link 'Show advanced options of the system and support recovery' who asked me to choose the configuration of my keyboard, but then when I do & click then it tells me "you must register to access system recovery options" I am never given the option connect!

  When using the F8 advanced boot options I'm still not able to solve this problem. The same thing (see above) that happens when I try to start in all security modes, last good known Configuration (Advanced), debug mode, start Windows normally etc. I don't understand it.

  Looking for other forums, they suggested dΘplaτant zero while running and then one selects Windows 7 to restore the laptop to its factory settings, but the same thing happens - it shows just the black screen with x:windows\system32\drvload.exe launched then startup repair, that does not solve the problem.

  I don't have a disc of windows 7 to restore since I only bought the laptop 6 days ago and didn't have time to do a still. In addition, the laptop must have the restoration on his hard drive, but I can't access it to restore windows.

  I'm just a home user understand all technical talk. Please can someone help me?

  Hello

  Sorry to hear you I have this problem. The fact is that the new laptops come with only HARD drive recovery image and not with recovery DVDs. What you can try now is to install the recovery image using HARD drive recovery facility.
  If this works you need out of the box again.

  Please do it following the instructions in this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please send us comments.

• Re: Keyboard issue on the new Satellite P870

  I bought a portable Satellite P870 last week, I found the function do not work, especially for the backlit keyboard function key, I tried almost everything, but doesn't help t, only the brightness and volume can be adjust.

  I wonder if there is an update of facilities or for my laptop error checking, maybe I am missing some files of utilities Toshiba?

  Hello

  Do you use your new Satellite phone with original operating system preinstalled that you got with it?

  Have you noticed these problems since the first day or later?
  What you can try is to reinstall extra package from Toshiba. This package contains several tools and one of them is utility of flash cards.

  Latest version, you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Installation of antivirus on the new Satellite L50B

  Toshiba Hello Forum
  I need to install kaspersky internet security 2015 (i've got the third license) on my new laptop, but there are already installed (but not yet configured) McAfee

  How do you propose to do?
  do I need to uninstall McAfee before you begin to install kaspersky?
  I read [former position | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48993] who's talking about problem of uninstalling McAfee...

  THX and sorry for my English.

  So I use Avira before Avira installation I delete originally preinstalled application antivirtus. I recommend you do the same thing.
  On my new Satellite, I removed McAffe without any problem using the option Uninstall in Control Panel > programs and features.

  After restarting the laptop installed Kaspersky and I'm sure that everything will be OK.

• Question of battery charge on the new Satellite C50t-A-10J

  I have a new Satellite C50t-A-10J that has intermittent load problems. Sometimes it charges ok sometimes it says connected does not support. When no current charging if I click on the battery icon supported starts and continues ok.

  Does anyone know of a more automatic solution? I read on similar problem solved by uninstalling and then reinstalling the Microsoft ACPI battery compatible control method in Device Manager but is reluctant to try because the computer is new.

  I can of course go back to the retailer, but thought I'd post just in case someone had a similar solution.

  Thank you

  Hi Geoff

  I guess this isn't problem in the system.
  It seems that your battery is defective and I recommend to contact the Toshiba authorized service provider in your country to get a battery replacement.

  Welcome them

• iTunes sorts only the new songs from the album artist; Cannot select multiple artists

  I had this problem for awhile now.  Whenever I have add a new song to my library, it will sort as a new artist, even if I already have this artist.  For example, I'll add a new Bayside song to my library, and despite the fact that I already have two albums of Bayside, the new song will sort itself separately from him, leaving me with two Baysides.  The only way to fix it is to add the album artist in both the novel and the stuff I already had.  It's incredibly frustrating, especially since iTunes allow me to select several artists both in the artist's view (although I can select several songs and albums - this seems to be a problem only when the view is the sidebar, as in the views of artist, Genre and composer).

  Help with fixing a problem (preferably both, although) it would be appreciated.

  I am currently using iTunes 12.3.2.

  It's a response of turingtest2 to a very similar to your question.  Maybe this will help.

  12 iTunes keeps having the same artist twice in the artist column

  Using the view songs grab all the tracks by an artist of the album given that you are having problems with and then read the information. Tab sort add set Album artist & artist album, X, click OK, and then return to . If you synchronize your content on a non - iOS such as classical iPod device, then you must also make sure artist is constant in the whole album. I propose generally invited and artists featured in the names of individual songs.

• Question about password on the new Satellite A105 HARD drive

  I am the owner of a Satellite A105 and the hard drive was failing. I got a new hard drive but before I gave up on the current one I decided to wipe it clean and a few tools to see if it was a way to recover.

  Well, when wiping clean it restarts and then he showed me a message saying "password type of HARD drive internal" or something similar. I do not know the password so I can't use the hard disk more (or is there a way to reset the password?), but before you install the new hard drive I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password.

  I mean, it locks the new hard drive or is it completely independent of the installed hard drive? The one I have is brand new, and I want to know if I plug it in and from the laptop are all I have to do?

  Hello

  If the HARD drive password has been activated and you don t usually know this password then the HARD drive is locked and can no longer be used.
  It s simply not accessible and it s not possible to remove this password.

  > I want to know if there could be a problem installing the new hard drive in the laptop without knowing the previous password. I mean, it locks the new hard drive or is it completely independent of the installed hard drive?
  I think that he should t be any problem with a new HARD drive.
  As I said the password is stored in the sector specials on the HARD drive. The old password should not exist on the new HARD drive (if the password has not been set).

  Best regards

• How the BPEL file adapter to read only the new files?

  Hello

  
  

  We have BPEL processes that define to execute bpel component - file adatper-

  When a file entered in the place that it is the path on the linux server. the beginning of bpel run what component bpel "File adapter" recognize this new file come to the location. its PollingFrequency set to 5. name of the property = "DeleteFile" value = "false" If the fleeting files there.

  We want to migrate the bpel new SOA version, so we did export and deploy SOA field again.

  the location of the file adapter is the same.

  but when the process BPEL deployment began to run for all the files that are in this situation - which define the file adapter.

  even the original soa tooks these files and start the BPEL processes for each of them. the new SOA which did us deploy BPEL processes takes advantage of these files even if they are very old.

  We want the adatper file we take only new files. the starting point is the time where we deploy the process so if we spread out at 10:00 we do not want this bpel will be from 09:00 or before the files

  Please help, how we can do this?

  Thank you

  Adapter JCA files/FTP Oracle - 11g Release 1 (11.1.1.6.2)

  Incoming headers

  Outside the payload file Oracle adapter publishes metadata for next header, with the incoming service, as shown in Figure 4-24:

  • jca.file.FileName: file name
  • jca.file.Directory: the directory name
  • jca.file.Batch: a unique name for a batch if debatching
  • jca.file.BatchIndex: index of batch for each message in the batch for debatching
  • jca.file.Size: the size of the file
  • jca.file.LastModifiedTime: the file was last modified

  Capture the jca.file.LastModifiedTime compare with any time is necessary. If jca.file.LastModifiedTime< 10:00="" am="" then="" do="" not="" action,="" else="" perform="" the="">

• How to transfer files from old PC of office to the new Satellite L750?

  Hi everyone - starting at this site so be gentle with me please.

  Specifically, I want to ask: (a) Will the MS Word 7 Starter, which is already installed on my computer Toshiba laptop accept a lot of files from my old Desk Top for most Word documents? What kind of capacity has the Starter? What is the best device to use - a portable hard drive? USB? Discs?

  and

  (b) how to retrieve my Bing toolbar? Currently, I don't have a toolbar that displays the file, new, cut and paste at all. I have a space of Bing search on my desktop, but nothing else except a toolbar at the top where I type addresses located on the side until now at the top right with host, Star and a cog. Higher than ago valued one minimize, maximize and cross to close.

  Thank you very much

  RR

  Hello

  All word documents are compatible with any Microsoft Office Word application.
  If you used old software in Microsoft Office 2003 and now want to use an Office 2010 or later server MS Office 2007, then you will need to install a patch Ms.
  But usually, you will receive a notification message if necessary.

  On moving the files to the other computer.
  The best and easiest method to move files is the use of external HDD USB or memory flash stick, copy the files to USB HDD and then move it to the new laptop.

  That's

• Offset path, leaving only the new path?

  Is it possible to use the 'path of shift' command on an object and end with just the new paths of offset.

  It is a double select / Remove the excess paths later.

  ++ Michael

  Apply it as effect > path offset and expand your appearance thereafter.

  Try to make something out of it.

• How to get only the new lines

  Hello
  
  I have a table as below
  
  emp_id (integer)
  id_est (integer)
  dt_est (date)
  
  for each emp_id I have several id_est with several dt_est... as below
  
  emp_id id_est dt_est
  1 1 10-01 - 2009
  1 2 2009 - 01 - 13
  2 3 2009 - 01 - 10
  2 4 2009 - 01 - 12
  2 5 2009 - 01 - 14
  3 6 2009 - 01 - 12
  4 7 2009 - 01 - 15
  5 8 2009 - 01 - 17
  5 9 2009 - 01 - 19
  
  I would get just the news lines function date each emp_id, so my result should be as below
  
  emp_id id_est dt_est
  1 2 2009 - 01 - 13
  2 5 2009 - 01 - 14
  3 6 2009 - 01 - 12
  4 7 2009 - 01 - 15
  5 9 2009 - 01 - 19
  
  How I do that?
  
  Thank you

  Hello

  Try this code.

  Salim cordially.

  SELECT   id_emp, MAX (id_est), MAX (dt_est)
      FROM t
  GROUP BY id_emp