only the first draws half of lines
Just changed color AND black ink in my new 4500 ENVY. It will print that now reduce upper half lines. Tried to clean it up.
Her husband cleaned with his thumb, and it worked fine! I was obviously too cautious, using a cotton swab.
Tags: HP Printers
Similar Questions
-
Mr President.
My worm jdev is 12.2.1
How to enter two rows at the same time with different default values that only the first line to use see?
Suppose I have a table with four fields as below
"DEBIT" VARCHAR2(7) , "DRNAME" VARCHAR2(50), "CREDIT" VARCHAR2(7) , "CRNAME" VARCHAR2(50),
Now I want that when I click on a button (create an insert) to create the first line with the default values below
So if I click on the button and then validate the second row with different values is also inserted on commit.
The value of the second row are like the picture below
But the second row should be invisible. It could be achieved by adding vc in the vo.
The difficult part in my question is therefore, to add the second row with the new default values.
Because I already added default values in the first row.
Now how to add second time default values.
Concerning
Mr President
I change the code given by expensive Sameh Nassar and get my results.
Thanks once again dear Sameh Nassar .
My code to get my goal is
First line of code is
protected void doDML(int operation, TransactionEvent e) { if(operation != DML_DELETE) { setAmount(getPurqty().multiply(getUnitpurprice())); } if (operation == DML_INSERT ) { System.out.println("I am in Insert with vid= " + getVid()); insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE", (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } if(operation == DML_UPDATE) { System.out.println("I am in Update with vid= " + getVid()); updateSecondRowInDatabase(getVid(), (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100)); } super.doDML(operation, e); } private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5) { PreparedStatement stat = null; try { String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " + "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } } private void updateSecondRowInDatabase(Object value1, Object value5) { PreparedStatement stat = null; try { String sql = "update vdet set AMOUNT='"+ value5+"' where VID='" + value1 + "'"; stat = getDBTransaction().createPreparedStatement(sql, 1); stat.executeUpdate(); } catch (Exception e) { e.printStackTrace(); } finally { try { stat.close(); } catch (Exception e) { e.printStackTrace(); } } }Second line code is inside a bean method
public void addNewPurchaseVoucher(ActionEvent actionEvent) { // Add event code here... BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator"); RowSetIterator rsi = dciter.getRowSetIterator(); Row lastRow = rsi.last(); int lastRowIndex = rsi.getRangeIndexOf(lastRow); Row newRow = rsi.createRow(); newRow.setNewRowState(Row.STATUS_NEW); rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow); rsi.setCurrentRow(newRow); BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry(); DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator"); RowSetIterator rsi1 = dciter1.getRowSetIterator(); Row lastRow1 = rsi1.last(); int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1); Row newRow1 = rsi1.createRow(); newRow1.setNewRowState(Row.STATUS_NEW); rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1); rsi1.setCurrentRow(newRow1); }And final saveUpdate method is
public void saveUpdateButton(ActionEvent actionEvent) { // Add event code here... BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry(); OperationBinding commit = bindingsBC.getOperationBinding("Commit"); commit.execute(); OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit"); operationBinding.execute(); DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef. iter.getViewObject().executeQuery(); }Thanks for all the cooperation to obtain the desired results.
Concerning
-
Discover with function as datasource returns only the first line.
Hello
I created the following function to get the status of all the rules for the instances of SQL Server.
The data type of the function output has been configured as 'List of SQLInstanceRuleStatuss', where SQLInstanceRuleStatuss is the custom type, I created in the same module.
When I tested the function, it returns all instances of SQL Server with two other columns.
But when I try to create a view with the Rows property that is configured to use the feature, it returns only the first line:
sqlRules = new ArrayList();
queryStatement = server. QueryService.createStatement ("(DBSS_Instance)");
queryResult = server. QueryService.executeStatement (queryStatement);
for (it in queryResult.topologyObjects)
{
sqlRule is functionHelper.createDataObject ("westjet_mark_dev:SQLInstanceRuleStatus", "none", "test");.
sqlRule.instance = it;
sqlRule.ruleName = 'test rule name';
sqlRule.status = false;
sqlRules.add (sqlRule);
}
Return sqlRules;
Did I miss something?
Thank you
Mark
Mark,
I think I forgot something
sqlRule=functionHelper.createDataObject("westjet_mark_dev:SQLInstanceRuleStatus","none","test");you create the test id
change your line of
sqlRule=functionHelper.createDataObject("westjet_mark_dev:SQLInstanceRuleStatus","none",null);This should allow the creation of a single object in your loop for
-
Can I use automatically select only the first line of a legend to include in the list of Figures?
Is there a setting in the FAKE ID CS6 utility that will allow me to use only the first sentence in a legend to include in a list of numbers?
Example of
Willard Wharf, Cocoa, Florida, 1887. It was the first blah blah blah of cocoa. Photo by a dead guy. with the permission of a lovely old lady whose grandmother collected it.
In the example above, the whole passage is currently formatted with a paragraph style sheet in the Arno Pro Caption. When I'm done, I would like to have this first phrase or sentence in "BOLD", which I planned to do with a character style sheet. The rest will be normal.
Now I understand more how the TOC utility works, I wonder, can I do a paragraph for the sentence of the title style and a second paragraph style for the remaining text in the legend that follows in the affirmative, how to make sure that the second paragraph will follow on the same line where ever the first paragraph style ends? Nested styles, perhaps? If the nested styles are the way to go, any comments or pointers to the simplest strategy to do this work will be appreciated.
Legends do not match. Some have a name and date; others are a title phrase or sentence, follow, sometimes up to several sentences. In General, however, there is only one sentence after the title. I also usually a "courtesy of...". "statement recognizing the source of the photo.
I'm a newbie using id cs6, for the first time, to format a book. I'm enjoying using the program, but some details lead me sometimes at a stop.
Thank you
Roy
If the TOC utility will choose paragraph or character style?
If so, I'm good. But the instructions in the site of Adobe and 2 manuals that I speak using paragraph styles. The ones of my choice list. Will have to do an essay on character styles.
-
Newb question - displays only the first of several fields
As a first application of Bb, I write a stopwatch and I want the larger time scale and the small milliseconds. As part of what I am trying to display several bitmap or label side-by-side fields, but when I run it using the Simulator, only the first is displayed.
So, for example, what I want is:
1-2: 3 4:5:6 7 8 9
with each number in own field but what I mean is just
1
that is the first field. If I then use buttons they all appear in the verticalFieldManager by default in horizontalField Manager but if I use labels or bitmaps, then all I get is the first field, even if I remove the horizontalFieldManager and just use the default verticalFieldManager. I googled the question, this forum and spent several hours reading the code examples and documentation, but I have yet to understand why I can't put several fields of these types of side-by-side. I have to have something between them as separators or empty fields?
The code that I've got so far is the following...
public TimerView() { super(); HorizontalFieldManager timerField = new HorizontalFieldManager(); Bitmap hour10 = Bitmap.getBitmapResource("num_1.png"); Bitmap hour01 = Bitmap.getBitmapResource("num_2.png"); Bitmap minute10 = Bitmap.getBitmapResource("num_3.png"); Bitmap minute01 = Bitmap.getBitmapResource("num_4.png"); Bitmap second10 = Bitmap.getBitmapResource("num_5.png"); Bitmap second01 = Bitmap.getBitmapResource("num_6.png"); Bitmap ms100 = Bitmap.getBitmapResource("num_7.png"); Bitmap ms010 = Bitmap.getBitmapResource("num_8.png"); Bitmap ms001 = Bitmap.getBitmapResource("num_9.png"); Bitmap colon = Bitmap.getBitmapResource("Colon.png"); BitmapField bfHour10 = new BitmapField(hour10); BitmapField bfHour01 = new BitmapField(hour01); BitmapField bfHourColon = new BitmapField(colon); BitmapField bfMinute10 = new BitmapField(minute10); BitmapField bfMinute01 = new BitmapField(minute01); BitmapField bfMinuteColon = new BitmapField(colon); BitmapField bfSecond10 = new BitmapField(second10); BitmapField bfSecond01 = new BitmapField(second01); BitmapField bfSecondColon = new BitmapField(colon); BitmapField bfMs100 = new BitmapField(ms100); BitmapField bfMs010 = new BitmapField(ms010); BitmapField bfMs001 = new BitmapField(ms001); timerField.add(bfHour10); timerField.add(bfHour01); timerField.add(bfHourColon); timerField.add(bfMinute10); timerField.add(bfMinute01); timerField.add(bfMinuteColon); timerField.add(bfSecond10); timerField.add(bfSecond01); timerField.add(bfSecondColon); timerField.add(bfMs100); timerField.add(bfMs010); timerField.add(bfMs001); add(timerField); }I know that this code violates probably some best practices or standards, but I intend to clean later.
-edited for spelling
Give it a go with images of the numbers. You have it easy with BitmapFields, because you know how much space they need with
getPreferredHeight() and getBitmapWidth(). Then you should be able to stick them next to each other.
If I was doing this and who are looking for a special look at the clock, which seems to be what you are doing, I would like to have the digital icons as you do, and then set an image large enough to hold the value of the clock and in my routine of painting, select draw digital icon proper, in the right place. As long as you load the bitmaps only once, I think it's the most effective way to do it.
Of course, a much simpler way would be to have just a RichTextField formatted as you suggest - RichTextField because you can have two different fonts in a single field.
-
Help! Only the first part of my production of exports.
Hello world. I must begin by saying that I am completely new to the first Pro CC 2015 have switched to Sony Vegas only a week ago.
I have a difficulty that doesn't seem wise for one big reason. The problem is that my production lasts 5 minutes and I can see it in the preview but very late. Waiting and waiting and waiting for its encode following export command that I find myself disappointed to see that the finished video contains only the first 35 seconds or so my production of all 5 minutes. The video works great, everything in these 35 seconds is how it should be, it is perfect, except the missing 4 minutes and 30 seconds. A fat that is not sensible is because the video, I'm trying to export is just the latest version. It was previously exported twice now. All I've done since then is add additional sounds and a few titles. I made sure that the Begin/End markers to cover the entire timeline on my screen of export
There was an error that arose on a previous export, which then had to be restarted. The error referred to in audio encoding and suggested I should switch to one pass instead of two during the encoding. I've only seen this error once and honestly do not know if it is related to this problem or not.
Intel Core i7
principal of 16 GB of Ram
2 GB of video Ram
Windows 8
Thanks indeed if you can shed some light.
Thanks for the reply of Bill.
Do you mean the main timeline? Forgive me, getting used to the Prime Minister. To answer your question, my best... There's no marker for the beginning or end up on the main screen. When you click export that I'm double-checking that the entire Sequence is selected as the Source and the start and end markers are in fact at the beginning and at the end. After four attempts, I had just finished with the first half minute of video rendering, however.
I found a fix for the problem now, but still did not work what caused (to my slight annoyance).
As an experiment, I deleted each sound track and the silent video exported now very well. To develop on this I have reinserted all the sounds, made all the sound tracks. Who has also exported very well which means that I have a video in its entirety. I fixed my own problem. I do not understand what may have caused it well.
-
Rule RTP company fills only the first member of the form
Hello
I have a form where the accounts are in lines and measures in columns.
I have created a business with the {FormAccounts} Variable rule (TYPE: members ... is not a member). Variable is used in the declaration of FIX, so that the calculation applies only to members of the selected account.
When I select several accounts (online) and BR (via right click Menu) on the appeal form, the guest opens and only the first member of the selection is filled in the variable. When I run the BR, the calculation is applied to this member (which is OK)
However, I can select several members by clicking the Member Selector and add more members to the variable. The calculation is properly invoked for these members.
So my question is, why my variable get filled with selected members (I tried selecting names of members [who selects all lines], cells). The variable is RTP, because I wanted to see which members are getting selected, otherwise it may be hidden.
Somehow the BR integrated: setting-> adjust the data is used when several data cells (members) are selected. Basically, I want my BR to be populated with selected members of the form adjust data works the same way.
Is this a bug or planning simply cannot fill custom variable br with several selected members of the form.
I don't make any sense?
Thank you in advance...
Sašo
I think that this is how it works. I tried with a variable whose type is members.
It is not showing me a prompt when I select several lines. However only works for the first row. (even if the menu is started from the second row).
Multiple lines selected, variable of type members. only works for the first line of the selection. (in 11.1.2.2) You can try to connect an SR and see what Oracle has to say.
Concerning
Celvin
-
replace only the first and the second comma by TAB in the apex using using jquery
All,
I'm generating models of string in the text box in my apex as page == > 23232,445454, «454545,7878,988978, 3r3e»
and I want to replace only the first and the second comma with TABS so I get like == > 23232 445454 «454545,7878,988978, 3r3e»
It should run with the jquery code when I click my button?
any help on this please?
Thank you.How does this update function:
function replaceUpToN(original, search, replaceWith, maxOccurence){ var NEW_LINE = '\n'; var lines = original.split(NEW_LINE); $.each(lines, function(index, value){ var idx = 0; lines[index] = value.replace(search, function(match, pos, original){ idx++; return idx <= maxOccurence ? replaceWith : match; }); }); return lines.join(NEW_LINE); } -
When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours
When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours
What happens if you try to synchronize not this first song and next song?
What is listed n the block status of iTunes when it freezes?
-
the column showing my address book now shows only the first three characters of each name
It's as if they have all been abbreviatedI try to decipher the names of these three characters before clicking on
to see the
address window of the person with all of the informationI'd like to be able to read the name first & last as before
Thanks in advance
Try dragging the column header to create the wider column
-
My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help
I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.
There is this bug on this problem:
I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.
Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).
YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.
-
I followed the advice and imported IE Favorites, but only the first two files have met. How can I get all THE files across please?
Wow. I think I will like Firefox if the aid is so easily available, quick and as good as this. Fixed right away
Thank you very much
Kevod -
How to convert only the first false true after a series of real values
Hello
I would like to know how I can convert only the first value false true after a series of true values. For example, I want to make the TTTFFF to TTTTFF.
-
I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?
I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespaceD: 74.2 GB with 70.6 freespaceThese are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WISo I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40I hope that makes sense to someone, any help gratefully received!As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.
J W Stuart: http://www.pagestart.com
-
Why my printer has suddenly started printing only the first three quarters of a page...?
Why my printer has suddenly started printing only the first three quarters of a page...?
Hello
Thanks for posting the question in the Microsoft Community!
If I understand correctly, you are facing problem with the printer of. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.
We start with two questions:
1 have had any changes made on the computer before the show?
2. What is the brand and model of the printer?
I suggest for the link and try to run the troubleshooter and check if it helps.
If the problem is not resolved, please provide more information to help you best.
Thank you.
Maybe you are looking for
-
do not load videos on YouTube, the videos that are on other sites, which are linked to YouTube also does not charge. I only have this problem with Firefox version 6.0.1. I'm not having this problem when I use (forced to use) Internet Explorer. Why is
-
I have a HP Pavilion slimline desktop computer. I got a virus. What I have to restore the entire computer or can I just restore to earlier as a day or two before the computer has been infected? Or should I just restore the entire computer.
-
Hello I often see the word "Instance" in the documentation of OR, but I don't have a clear understanding of what it means. Can someone please offers a good definition of the word "Proceeding" with respect to Labview? Here's an example of some docum
-
Original title: 80246007 I get the message that a new update is ready to install. It seems to start to install but still fails. I'm getting an error 80246007. I went to the page of BITS and everything has been put in place as it was supposed to. So I
-
BlackBerry smartphones IT's BACK! THE * beep * GREEN, FLASHING...
I have a flashing green light on my curve I can't turn off. .. .and it isn't the LED of the coverage area, as I had hoped to the last assignment.