onStatus returns wrong codes?

Similar Questions

• Component returned error code: 0 x 80570015

  Loading Firefox, I get this error

  Component returned error code: 0 x 80570015 (NS_ERROR_XPC_CI_RETURNED_FAILURE) [nsIJSCID.createInstance]

  I click OK and Firefox loads as if nothing is wrong - but it's embarrassing

  Hello OleDad127, this error message is probably triggered by one of your extensions - please disable them one by one (and reboot after each step) to know that could be causing it.

  then please directly contact the developers of extension through the channels of support they provide - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• STOP SENDING WRONG CODE

  I often change my email PW. Now it asks for a code. I got the code. I entered the code. It says wrong code. I got the second code. Once again, an incorrect code.  I try to avoid a hack. STOP TO PROTECT ME FROM MYSELF! 5 hrs. I looked for a solution. It might be too late now. SEND ME A CODE THAT WORKS FFS

  And how about NONE OF THE ABOVE in the SELECTION? And how about NONE OF THE ABOVE in the category?

  After 6 hours and 3 different codes it has finally worked. Yes, this is not good.

• I bought a new computer and cannot install my previous purchse of the element 13. Keep telling me that I entered a wrong code?

  I bought a new computer and I can not install an earlier version of Photoshop elements 13. Tell me always as I entered the wrong code although it tell me that I bought in my Adobe ID

  Go to this link. Click on the blue button; When logged in with your Adobe ID; then click on Chat 24/7

  Contact the customer service

• Screw system configuration return a code error-2147220608 in LV2013 but not in LV2012 on my system sbRIO

  I worked to deploy a minor correction to an existing system that has worked. Part of this upgrade was to move to LV2013. The configuration of the system live that I used successfully in LV2012 to change the comment and the host name of the error code return now target sbRIO-2147220608 in 2013 when I try to save the changes. By looking at the detailed of the Save Changes (System) .vi result output, I get the message "the IP address and the gateway must be on the same subnet." The problem is twice 1) I'm not change the IP address or gateway on the system and 2) IP address and the gateway are preconfigured by MAX OR 10.0.1.155 and 10.0.0.3 with a subnet mask of 255.255.0.0. Based on my understanding and conversations with my COMPUTER service is a valid combination.

  Help?

  Warrior of wire

  Hello

  R & D work on implementing a fix for this bug. In the meantime, here is a workaround:

  

  If you write the correct IP address and write the host name and the comment, then your backup will be successful. We realize that this is not a very pretty or intuitive solution, but it should work until a fix is implemented.

• I ran a hard drive diagnostic and she returned with CODE RETURN fail 7

  My computer crashed, trying everything I ran a "hard drive Diagnostics' and she came back with MAXTOR 6y160m0-fail return code 7.

  Does mean my HDD id no good?

  http://www.ihatedell.NET/forum/phpBB3/viewtopic.php?f=8&t=7798

  According to above it is.

• Windows Vista has stopped auto update cannot update manually. Used windows 'Mr fix - it' returned error code: 0 x 80040154

  I don't know when this problem occurred. All of a sudden I lost sound on my Windows Vista Business System. In trying to find a solution to this problem, I went to the Microsoft Fix - It Center and downloaded the troubleshooting Fix - It. After insalling the Fix - It store and then you try to run the program an error code indicating: "C:\windows\System32\dssenh.dll is not designed to run on windows or it contains an error. Try to install the program using Intallation to original media or software to support provider or system administrator. "before you begin to solve the problem, as well, I decided to create a restore point, then I went to windows update and had an error code: 802440F when you try to update. Go to the Microsoft site and then try to download the updates manually it immediately opens the automatic update dialog box and activating returns the same error code: 8024402F. After reading the list of error codes, the closest codes of this number were 8024402C and 80244022

  and the main board seems to rerun the update with the firewall shutdown, then restart the firewall after the download. I did this and still have not solved my problem. I think I have a sound card problem, but would not interfere with the automatic windows update. I then tried the option repair on windows vista drive still no luck.

  Hello

  I had the same problem and I tried the steps in the following article and it worked for me.

  http://support.Microsoft.com/kb/900936

  http://support.Microsoft.com/kb/883821

  http://support.Microsoft.com/kb/836941

  All the best!

• Update for Windows Vista (kb975467) Security manages not to install and returns error Code 80092004

  The update of the topic was in Quebec City to install on my machine since October 16, 2009. Whenever I shut the machine down it tries to install, but fails to return code 80092004. I tried to download the KB975467 from Microsoft Update and received an error that the download is not compatible with my system. Can someone please help?

  Thank you

  Dustin

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• DeviceIoControl on ATA_PASS_THROUGH_DIRECT returns error code 87

  Dear all,
  the following code produces error code 87 (invalid parameter) only when PTE-> DataTransferLength is greater than 512 * 256.
  Would you please find out what is the problem and how to fix it.
  Thank you.

  Changwen Xie

  #################################
  The actual values PTE before call DeviceIoControl are:
  ##################################
  PTE
  5 unsigned AtaFlags in brief
  [- CurrentTaskFile {length = 8} unsigned char]
  [0] 7 unsigned char
  [1] 13 unsigned char
  [2] 1 unsigned char
  [3] 0 unsigned char
  [4] 0 unsigned char
  [5] 0 unsigned char
  [6] 146 unsigned char //0x92 downoad microcode
  [7] 0 unsigned char
  DataBuffer 0x05CB0068 void *.
  DataTransferLength 137728 unsigned int / / it is greater than 512 * 256, so return an error code 87
  Length 40 unsigned in brief
  LUN 0' unsigned char
  PathId 0 unsigned char
  [- PreviousTaskFile {length = 8} unsigned char]
  [0] 0 unsigned char
  [1] 0 unsigned char
  [2] 0 unsigned char
  [3] 0 unsigned char
  [4] 0 unsigned char
  [5] 0 unsigned char
  [6] 0 unsigned char
  [7] 0 unsigned char
  ReservedAsUchar 0 unsigned char
  ReservedAsUlong 0 unsigned int
  TargetId 0 unsigned char
  TimeOutValue 10 unsigned int

  #############################################
  The actual source code:
  #############################################
   
  ATA_PASS_THROUGH_DIRECT * PTE = new ATA_PASS_THROUGH_DIRECT;
  Memset (PTE, 0, sizeof (ATA_PASS_THROUGH_DIRECT));
  PTE-> length = sizeof (ATA_PASS_THROUGH_DIRECT);
  PTE-> AtaFlags = 0;
  PTE-> AtaFlags | = ATA_FLAGS_DRDY_REQUIRED;
  PTE-> AtaFlags | = cmd-> isread()? ATA_FLAGS_DATA_IN: ATA_FLAGS_DATA_OUT;
  order of 28 bits
  PTE-> AtaFlags | = cmd-> is48bit()? ATA_FLAGS_48BIT_COMMAND: 0;
  PTE-> AtaFlags | = cmd-> isDMA()? ATA_FLAGS_USE_DMA: 0;
  PTE-> DataTransferLength = cmd-> getbuffersize();
  PTE-> TimeOutValue = 10;
  PTE-> DataBuffer = cmd-> getbuffer();
  PTE-> CurrentTaskFile [0] = cmd-> getfeaturesbyte (false);
  PTE-> CurrentTaskFile [1] = cmd-> getnumsectorsbyte (false);
  PTE-> CurrentTaskFile [2] = cmd-> getLBAbyte(0,false);
  PTE-> CurrentTaskFile [3] = cmd-> getLBAbyte(1,false);
  PTE-> CurrentTaskFile [4] = cmd-> getLBAbyte(2,false);
  PTE-> CurrentTaskFile [5] = cmd-> getLBAbyte(3,false);
  PTE-> CurrentTaskFile [5] | = cmd-> getdevice();
  PTE-> CurrentTaskFile [6] = cmd-> getcommand();
  PTE-> PreviousTaskFile [0] = cmd-> getfeaturesbyte (true);
  PTE-> PreviousTaskFile [1] = cmd-> getnumsectorsbyte (true);
  PTE-> PreviousTaskFile [2] = cmd-> getLBAbyte(0,true);
  PTE-> PreviousTaskFile [3] = cmd-> getLBAbyte(1,true);
  PTE-> PreviousTaskFile [4] = cmd-> getLBAbyte(2,true);
  PTE-> PreviousTaskFile [5] = 0;
  PTE-> PreviousTaskFile [6] = cmd-> getcontrol();
  PTE-> PreviousTaskFile [7] = 0;
     
  make Ctrl + IO
  DWORD BR;
  int ret = (DeviceIoControl
  _handle,
  IOCTL_ATA_PASS_THROUGH_DIRECT,
  PTE,
  sizeof (ATA_PASS_THROUGH_DIRECT),
  PTE,
  sizeof (ATA_PASS_THROUGH_DIRECT),
  & BR,
  (0);
   
  If (! ret) DWORD dwLastError = GetLastError();

  Hello CWXie,

  I suggest you post your question on our MSDN Developer for support forums:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio/

• Using RemoteUpdateManager on labs Mac returns the code of output 0 immediately, Ute, the product is still on version 2015.1 instead of 2015.5

  I've never had this problem before updating my Adobe CC produts for the Mac Labs in the school that I work. Normally I just pull the terminal command

  usr/local/bin/remoteupdatemanager

  and the products are beginning to update themselves. For some reason any in this case, they return the exit code 0, but when I check the products that they are still stuck on 2015.1

  All advice is appreciated!

  I did some further tests on this issue.

  2015.5 Photoshop isn't an update for Photoshop 2015.5, this is a standalone version with a full installer which can coexist with earlier versions. So, it would be necessary to package and deploy the latest version of Photoshop. Once deployed, it can be updated with the current version of RUM.

• DatabaseMetaData and ResultSetMetaData return different codes of Type SQL for number

  Hello

  I was testing the code of a colleague who used ResultSetMetaData who was retrieved with Statement.getMetaData () of a select statement. ResultSetMetaData.getColumnType (I) returned 2 (digital) for the SQL type number. My DatabaseMetaData used test code comes from Connection.getMetaData (). DatabaseMetaData.getColumns returned 3 (decimal) for the SQL number type.

  Here is a snippet of code to illustrate the issue:

  The database must contain table MY_TABLE with a column of type "digital."

  String username = "user";

  String password = "password";

  String host = "host".

  Port of String = "port";

  String sid = 'sid ';

  
  

  DriverManager.registerDriver (new oracle.jdbc.OracleDriver ());

  Connection connection =

  DriverManager.getConnection ("JDBC: thin: @" + host + ': ' + port + ': ' + sid, user, password);

  Get the SQL with DatabaseMetaData type

  Metadata DatabaseMetaData = connection. getMetaData();

  ResultSet tables is metadata.getTables ( user, null,null, new String [] { "TABLE" });.

  My_table should be the first table

  if (tables. next()) {

  String tableName = table.getString (3);

  log.info (tableName);

  ResultSet columns is metadata.getColumns ( user, tableName,null, null);.

  while (columns. next()) {

  String columnName = columns.getString (4);

  String columnType = columns.getString (5);

  System.out.println (columnName + "' + columnType" ");

  Column type 3

  }

  columns. close();

  }

  tables. close();

  Get the SQL with ResultSetMetaData type

  Statement statement = connection. createStatement();

  String SQL = ' SELECT * FROM my_table ';

  . Perform statement(sql);

  ResultSet resultSet = statement. getResultSet();

  ResultSetMetaData metaData2 = resultSet. getMetaData();

  for (int i = 1; I < = metaData2. getColumnCount(); i++) {

  System.out.println (metaData2.getColumnName (I) + "' .getColumnType metaData2(i) +" ");

  Column type is 2

  }

  Is there a reason for the discrepancy?

  Kind regards

  Johannes

  A bug has been filed for this. You must get your license in any case. ojdbc14 is the obsolete way.

• How can I return my code back to dreamweaver cc mode 2014?

  I have recently updated and you don't like the high and low cc code layout 20141 is it possible to return the layout to the previous style? I.e. 2014.0

  Go to your view menu and uncheck the Design view on top

• The arbiter of USB VMware returned error code 4 (9)

  Hello.

  First, it is write in English, because I am an American or a European. (in fact, Korean)

  So I hope that my message will be pretty silly to make you sneer.

  What I tried to do is just acknowledging my withdrawal on virture OS disk.

  This device, use the usb port, was given by my friend, helps me to play the game online automatically.

  But I found the problem: this device does not work on Windows 7, my current operating system.

  So I used "vmware workstation", hoping that my camera works well on virture OS.

  But whenever I click on "Connect (disconnect host)" button, nothing happens.

  I could just hear the sound of disconnection of the drive of the abduction, on my host computer.

  I tried to solve this problem, research and research until almost 5 hours... but nothing has nothing.

  Reads the error message: The VMware USB arbitrator returned the error code 4 (sometimes 9 error code)

  the solutions I do is:

  1 reinstall the VMware software

  2 reinstall the VMware tools

  3. open the unit on the computer prompt administrator → check → yellow exclamation usb driver delete corresponding

  (I could not find the device in the list, it seems that my device was not recognized at all)

  4. open the Registry Editor → go to the path: deletion → HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000) the value of key named "UpperFilters" or "LowerFiltters".

  5. Remove AMD USB Filter Driver

  (my motherboard is not AMD)

  6 restore the driver 'USB hub root'

  (I could not click the Cancel button, it has not been activated)

  7. start the Windows Service named "VMware USB Arbitration Service"

  (He's already started)

  many should be listed, but I do not remember...

  I use the desktop version 7.0.1.

  Desperately need someone help... hope the answer comes soon.

  Please check if vmusbarbservice is working correctly - see
  http://FAQ.sanbarrow.com/index.php?solution_id=1113

  If it works as expected, try adding the USB device to your virtual machine - then set later the vmware.log here

• CreativeCloudSet - Up.exe fails to load, returns error code 48

  As the title says.

  Following the advice of a support representative, I deleted the contents of my file folder and deleted the opm.db file.

  I then rebooted (Unfortunately my computer had some problems and I lost contact with the technical support representative) and I tried to re - run CreativeCloudSet-Up with exactly the same result.

  I repeated the procedure above without success. The program always returns the error code 48, cannot access a critical file.

  Any ideas? Thank you.

  * solved *.

  My users folder is on my D: drive and so is my downloads directory (such as configured by Windows)-this seems to be the problem. I moved CreativeCloudSet - Up.exe on my desk (which is always on drive C :) and it says now that it's installing.)

  Hope this helps someone else.

• Windows Vista update KB980248 on my Sony VGC-JS160J installation returns error code 80070017

  There is a persistant problem with my computer. It is a 64-bit system with Pentium Dual - Core CPU E5200 @ 2.50 GHz and 4.0 GB RAM.

  No idea why the update fails? What are the consequences of not being able to install it?

  The errorcde means that you have a CRC error. In order to check your HARD disk for error (chkdsk C: /r f). ALS try to download the update from the download area:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c16e703f-5a4a-4e8a-8998-87eda1efc302

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/