The arbiter of USB VMware returned error code 4 (9)
Hello.
First, it is write in English, because I am an American or a European. (in fact, Korean)
So I hope that my message will be pretty silly to make you sneer.
What I tried to do is just acknowledging my withdrawal on virture OS disk.
This device, use the usb port, was given by my friend, helps me to play the game online automatically.
But I found the problem: this device does not work on Windows 7, my current operating system.
So I used "vmware workstation", hoping that my camera works well on virture OS.
But whenever I click on "Connect (disconnect host)" button, nothing happens.
I could just hear the sound of disconnection of the drive of the abduction, on my host computer.
I tried to solve this problem, research and research until almost 5 hours... but nothing has nothing.
Reads the error message: The VMware USB arbitrator returned the error code 4 (sometimes 9 error code)
the solutions I do is:
1 reinstall the VMware software
2 reinstall the VMware tools
3. open the unit on the computer prompt administrator → check → yellow exclamation usb driver delete corresponding
(I could not find the device in the list, it seems that my device was not recognized at all)
4. open the Registry Editor → go to the path: deletion → HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000) the value of key named "UpperFilters" or "LowerFiltters".
5. Remove AMD USB Filter Driver
(my motherboard is not AMD)
6 restore the driver 'USB hub root'
(I could not click the Cancel button, it has not been activated)
7. start the Windows Service named "VMware USB Arbitration Service"
(He's already started)
many should be listed, but I do not remember...
I use the desktop version 7.0.1.
Desperately need someone help... hope the answer comes soon.
Please check if vmusbarbservice is working correctly - see
http://FAQ.sanbarrow.com/index.php?solution_id=1113
If it works as expected, try adding the USB device to your virtual machine - then set later the vmware.log here
Tags: VMware
Similar Questions
-
Component returned error code: 0 x 80570015
Loading Firefox, I get this error
Component returned error code: 0 x 80570015 (NS_ERROR_XPC_CI_RETURNED_FAILURE) [nsIJSCID.createInstance]
I click OK and Firefox loads as if nothing is wrong - but it's embarrassing
Hello OleDad127, this error message is probably triggered by one of your extensions - please disable them one by one (and reboot after each step) to know that could be causing it.
then please directly contact the developers of extension through the channels of support they provide - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...
-
have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down
Hello
Please contact the Microsoft community. We will be happy to help you with your concern.
According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.
How do you try to install the driver? Is it through the disc or via the site?
Method 1: Use a troubleshooting tool to solve the problem:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: temporarily Disable the Antivirus and firewall and try to install
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Try to install in the clean boot
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.
Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.
-
I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code. I have tactile and available USB. Any help would be appreciated! Also, once I get Windows running again how do I start to Android? This option is missing.
Hello
Thanks for posting your query in Microsoft Community.
This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.
However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.
Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.
Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.
-
A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006
Error comes when you try to connect.
-able to login in safe mode
-J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run
-Tried system restore
Any other solution?
Hello
- What were the changes made before the issue started?
You can check this link:You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer -
Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...
Hello mnaveen.kumar,
Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.
HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.
You can try to manually create the key to see if this will help.
Please reply back and let us know if this can help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Some good dagen Sinds we Indesign CS5.5 niet meer starten. We will merge: the file is damaged "InDesign SavedData" (error code: 6). Wie kan mij helpen?
Problem solved by renaming the folder SavedData. He created autmaitcally one again and error message missing.
-
Using the USB XP gives error code 10
Use the usb port it says error code 10
Read this:
http://forums.WinDrivers.com/showthread.php?t=54371 -
I can't install the latest windows update. My error code is 0x800706BE.
original title; I can't install the latest windows update. I used Microsoft Fix It and still not able to install the update. My error code is 0x800706BE.
System information:
Microsoft Windows XP Professional
Version2002
Service Pack 3
Dell Computer Corporation
Dell Dimension DIM4300S
Intel Pentium 4 CPU 1.60 GHz
1.59 GHz, 768 MB Ram
Internet explore 8
Norton Internet Security 2011 (updated)
Hi ScottCarter,
· Did you do changes on the computer before the show?
· You are trying to install updates?
· Are what fixit you referring?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
-
I don't know when this problem occurred. All of a sudden I lost sound on my Windows Vista Business System. In trying to find a solution to this problem, I went to the Microsoft Fix - It Center and downloaded the troubleshooting Fix - It. After insalling the Fix - It store and then you try to run the program an error code indicating: "C:\windows\System32\dssenh.dll is not designed to run on windows or it contains an error. Try to install the program using Intallation to original media or software to support provider or system administrator. "before you begin to solve the problem, as well, I decided to create a restore point, then I went to windows update and had an error code: 802440F when you try to update. Go to the Microsoft site and then try to download the updates manually it immediately opens the automatic update dialog box and activating returns the same error code: 8024402F. After reading the list of error codes, the closest codes of this number were 8024402C and 80244022
and the main board seems to rerun the update with the firewall shutdown, then restart the firewall after the download. I did this and still have not solved my problem. I think I have a sound card problem, but would not interfere with the automatic windows update. I then tried the option repair on windows vista drive still no luck.
Hello
I had the same problem and I tried the steps in the following article and it worked for me.
http://support.Microsoft.com/kb/900936
http://support.Microsoft.com/kb/883821
http://support.Microsoft.com/kb/836941
All the best!
-
The update of the topic was in Quebec City to install on my machine since October 16, 2009. Whenever I shut the machine down it tries to install, but fails to return code 80092004. I tried to download the KB975467 from Microsoft Update and received an error that the download is not compatible with my system. Can someone please help?
Thank you
Dustin
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
USB hub gets error code 43 - Windows 7
I get an error code 43 for a hub. This is a wireless router. I am able to use wireless very well. But given that the router is right next to my PC Windows 7, would be nice if I could use a direct cable connection to the router as a hub for my internet connection.
I had a Cisco wireless router and it seems to stop working. so, I bought an incredibly cheap wifi router. He worked for a while... then the direct connection to the it stopped working too. [How silly of me to think that the problem was with the Cisco router. [Bet when I solve this problem, this router as a hub works fine, too.]
I have collected the msinfo32.nfo file and post it on SkyDrive as soon as SkyDrive is operational again.
Windows 7 on a new PC.
Thank you
Julie
Hello
Code 43:
Windows has stopped this device because it has reported problems. (Code 43)
One of the motors controlling the unit notified the operating system that the device failed in some
way. For more information on how to diagnose the problem, see the hardware documentation.On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
---------------------------------------------------
Have you checked for updated firmware for the 8? Check with the device manufacturer support.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannowHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Ports USB 43 problem error code
On a port USB is not recognized. Error code 43. I have four USB Port on the laptop. Three on the left and right and the other on the back. All have failed to recognize the devices. I tried in vain to run the programe "Fix it." Operating system is Windows 7 Ultimate
Hi CosmosOmondi,
What is the number and the model of your laptop?
Windows has stopped this device because it has reported problems. (Code 43)
Method 1: Reinstall the USB (Universal Serial Bus) controllers.
First of all, please disconnect all USB devices and then perform the following steps:
(a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.
(b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".
(c) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and windows will automatically reinstall all USB controllers.
Method 2: the motherboard\chipset to the latest driver update.Note: Please check with the manufacturer of motherboard\computer before you install the driver.
Method 3: You can see the steps mentioned in the link below
Tips-for-solving-problems-with-USB-devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices(Article applies to Windows Vista, not valid for Windows 7)
Method 4: You can view the documentation for the hardware for more information about diagnosing the problem.
-
DeviceIoControl on ATA_PASS_THROUGH_DIRECT returns error code 87
Dear all,
the following code produces error code 87 (invalid parameter) only when PTE-> DataTransferLength is greater than 512 * 256.
Would you please find out what is the problem and how to fix it.
Thank you.Changwen Xie
#################################
The actual values PTE before call DeviceIoControl are:
##################################
PTE
5 unsigned AtaFlags in brief
[- CurrentTaskFile {length = 8} unsigned char]
[0] 7 unsigned char
[1] 13 unsigned char
[2] 1 unsigned char
[3] 0 unsigned char
[4] 0 unsigned char
[5] 0 unsigned char
[6] 146 unsigned char //0x92 downoad microcode
[7] 0 unsigned char
DataBuffer 0x05CB0068 void *.
DataTransferLength 137728 unsigned int / / it is greater than 512 * 256, so return an error code 87
Length 40 unsigned in brief
LUN 0' unsigned char
PathId 0 unsigned char
[- PreviousTaskFile {length = 8} unsigned char]
[0] 0 unsigned char
[1] 0 unsigned char
[2] 0 unsigned char
[3] 0 unsigned char
[4] 0 unsigned char
[5] 0 unsigned char
[6] 0 unsigned char
[7] 0 unsigned char
ReservedAsUchar 0 unsigned char
ReservedAsUlong 0 unsigned int
TargetId 0 unsigned char
TimeOutValue 10 unsigned int#############################################
The actual source code:
#############################################
ATA_PASS_THROUGH_DIRECT * PTE = new ATA_PASS_THROUGH_DIRECT;
Memset (PTE, 0, sizeof (ATA_PASS_THROUGH_DIRECT));
PTE-> length = sizeof (ATA_PASS_THROUGH_DIRECT);
PTE-> AtaFlags = 0;
PTE-> AtaFlags | = ATA_FLAGS_DRDY_REQUIRED;
PTE-> AtaFlags | = cmd-> isread()? ATA_FLAGS_DATA_IN: ATA_FLAGS_DATA_OUT;
order of 28 bits
PTE-> AtaFlags | = cmd-> is48bit()? ATA_FLAGS_48BIT_COMMAND: 0;
PTE-> AtaFlags | = cmd-> isDMA()? ATA_FLAGS_USE_DMA: 0;
PTE-> DataTransferLength = cmd-> getbuffersize();
PTE-> TimeOutValue = 10;
PTE-> DataBuffer = cmd-> getbuffer();
PTE-> CurrentTaskFile [0] = cmd-> getfeaturesbyte (false);
PTE-> CurrentTaskFile [1] = cmd-> getnumsectorsbyte (false);
PTE-> CurrentTaskFile [2] = cmd-> getLBAbyte(0,false);
PTE-> CurrentTaskFile [3] = cmd-> getLBAbyte(1,false);
PTE-> CurrentTaskFile [4] = cmd-> getLBAbyte(2,false);
PTE-> CurrentTaskFile [5] = cmd-> getLBAbyte(3,false);
PTE-> CurrentTaskFile [5] | = cmd-> getdevice();
PTE-> CurrentTaskFile [6] = cmd-> getcommand();
PTE-> PreviousTaskFile [0] = cmd-> getfeaturesbyte (true);
PTE-> PreviousTaskFile [1] = cmd-> getnumsectorsbyte (true);
PTE-> PreviousTaskFile [2] = cmd-> getLBAbyte(0,true);
PTE-> PreviousTaskFile [3] = cmd-> getLBAbyte(1,true);
PTE-> PreviousTaskFile [4] = cmd-> getLBAbyte(2,true);
PTE-> PreviousTaskFile [5] = 0;
PTE-> PreviousTaskFile [6] = cmd-> getcontrol();
PTE-> PreviousTaskFile [7] = 0;
make Ctrl + IO
DWORD BR;
int ret = (DeviceIoControl
_handle,
IOCTL_ATA_PASS_THROUGH_DIRECT,
PTE,
sizeof (ATA_PASS_THROUGH_DIRECT),
PTE,
sizeof (ATA_PASS_THROUGH_DIRECT),
& BR,
(0);
If (! ret) DWORD dwLastError = GetLastError();Hello CWXie,
I suggest you post your question on our MSDN Developer for support forums: -
Cannot connect the Olympus camera to transfer pictures to the computer with 10 and 31 error codes
Original title: Codes error Windows 7 31 and 10
Trying to get my photos on my camera (Olympus) on the computer using the USB cable. Error report getting is the USB mass storage device driver has a problem. Device cannot start (10) Port_ #0007.Hub_ #0001 C:\Windows\system\Drivers\vwifimp.sys also microsoft virtual wifi miniport adapter code 31 error.
Have tried to uninstall the device in Device Manager and the system hangs when the computer is restarted.
Disabled people of Microsoft virtual wifi miniport adapter.
Have you tried to update drivers using windows update and it said that all updates are up-to-date.
Have tried troubleshooting and not fixed.
Have you tried Mr fix it and not fixed.
Hello
1 have you ever done any recent hardware or exchange of software on your computer before the show?
2. What is the camera Olympus model number?
3. other USB devices work properly with the computer?
4 that Mr. Fix it you try?
I suggest you to connect the Olympus camera to another USB port and check with the question.
Also try to connect to another computer and see if that fixes the problem.
According to the error codes, you must Access the site of Olympus and install the drivers updated to the Windows 7 operating system.
Follow the links below:
Method 1:
I suggest you to run the tool and troubleshooting hardware devices and check with the question:
Open the hardware and devices Troubleshooter:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Also, download and install the latest Chipset drivers from the website of Olympus, since they also include drivers for USB.
Update the drivers from the Olympus website by typing the model number:
http://www.olympusamerica.com/cpg_section/cpg_downloads.asp
For reference:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:
http://support.Microsoft.com/kb/943104
For more information:
Contact Olympus Support:
http://www.olympusamerica.com/cpg_section/cpg_consumercontact.asp
I hope this helps.
Maybe you are looking for
-
All of a sudden is: "all TV tuners are currently in use.
I happily use Media Center on Windows 7 and I'm now all of a sudden the errror "all TV tuners are currently in use. I did not need hibernation or sleep. The tuner is an external USB one of HP. I even went as far as the deletion of the Adaptec USB dri
-
Download XPsp3 error 'file corrupted '.
I ran "SP3: http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?
-
The value of all the permissions from third parties to an Application
How to put all third paty permissions to an application through programitically. I saw ApplicationPermissions class. What I don't know which field gives the permissions of all. I want to set the permissions of the application like this picture below
-
Error during removal of command in pix 520
rtpmap 1 ipsec-isakmp crypto map ! Incomplete
-
BlackBerry Smartphones BB Desktop Manager on Windows XP Service Pack 1
Need help! Windows 8 worked pretty slow on my Vaio Mini so I installed Windows XP but now I can't access it through Z10 mobile error - The Drivers install plus BB link and Desktop Manager - comes: - BlackBerry Device Manager requires that your comput