Ookla Speedtest App WRT1900AC reliable?

Similar Questions

• WRT1900ACS 8 x slower than EA old

  Put my new WRT1900ACS in the exact same task that my router Linksys EA one came, 5 feet away Samsung Galaxy S6 is showing 866Mbps,-34 dBm, the signal strength, channel 153.

  However, it is only really get 41 Mbps to the top and 25 Mbps down and measured by OOKlA Speedtest (Internet) Android and Android WIFI Speedtest (wired LAN PC).

  With my old router EA, I was getting 150 Mbps on Speedtest OOKIA - max my modem can do.  I will now have the floor as an AP and sat down next to the WRT1900ACS give me 25Mbps down, EA upstairs always gives me 65 Mbps to a good 100 feet away and through a floor.

  They have very similar web interfaces, so I copied all the router settings of EA, including forcing them channels he used, and finally even the settings under advanced - wireless.html.

  It's not interference or a channel number, given that EA got 8 x speed sitting in the same place on the same channel.  Prioritization of media is set to OFF.  List of devices shows phone connected on the 5 GHz band.

  Any ideas before I RMA it?

  So, I 'solved', kind of?  Switching personal WPA2 only to WPA2/WPA mixed personal my up shoots and low rate of 400 MB/s.  Return to personal WPA2 only blocking their return to up to 40 Mbps to the top and 25 Mbit/s down.

  Exactly backwards of the majority of the recommendations.  To be clear:

  WPA2 only: 40Mbps up/25 Mbps down

  WPA2/WPA mixed: 400 bit/s upwards and down.

  It is with a phone Samsung Galaxy 6, so I don't think it's a matter of the phone is not not about to manage WPA2.

• Risk of blackBerry 10 Android apps

  Hello

  yesterday, I received an email that there is a security hole when you use Android applications.

  Unfortunately, it is a German page, but I think you get what it says when you translate

  with google translate:

  Source IOC:

  German

  English translation

  Heise source:

  German

  English translation

  Basically, he said that applications can read direct contacts of the business part of the phone.

  The security flaw is fixed, but my provider for example has not released the update again...

  So, if you use 10.2.1.537 or lower, I would Setup not all Android Apps.

  What do you think about this?

  Concerning

  Redsun

  The threat is low if you stick to the known apps and reliable sources.

  Although it was reported as a security risk, I heard no Android applications that currently use this hole.

  But if it's something, you are concerned about yes I recommend waiting for the update.

  There is also a policy of BES ' security > Apps access to the work of personal Contacts "which can be set to None which stops all applications personal BlackBerry and Android to access business contacts side.

  Once the update has been pushed out, you can change the return policy.

• As soon as I rent a movie, the screen indicates «ready to play within 72 hours!» What will happen?

  After I rent a movie from iTunes, the screen keeps loading and shows "ready to play within 72 hours!"  Time keeps changing!  No one knows how to fix?  I have cold it starts twice!

  Sounds like a slow internet connection.

  Do you know how fast your internet is supposed to be?

  Is this a new AppleTV 4? -If so get Ookla free speedtest app to measure your connection speed on AppleTV 4 directly, if not try on a computer or other device:

  http://www.Speedtest.NET/

  For almost instant playback, you need to do:

  2.5 Mbit/s in Standard definition

  6 Mbit/s in 720 p high definition

  8 Mbps for high definition 1080 p

  .. slower .all and AppleTV has "buffer" by downloading some of the film first to avoid the power button during playback.

  ITunes rentals are fixed quality, while Netflix and other often use adaptive rate connections reduce the quality for internet slower and they will often play immediately when an AppleTv must buffer.

  If you keep restarting it may start from scratch every time - and also using AppleTv for other functions, while the wait could wipe out any content in the buffer (it was ATV 2 and 3).

  There are other possible causes, but the first thing to look at is the speed of your connection.

• Slow download with WRT1200AC/SB6121 Modem/Comcast Internet speeds

  I recently bought the router WRT 1200 AC to complete my wifi at home.  I also have a new laptop Windows 10.  When you are connected wireless network, I ran the test of speed of Comcast.  Results are usually the following:

  IPv4 - 2 MB/s download, 5mbps download

  IPv6 - 30 MB/s download, 6 Mbit/s upload

  I also connected to my wireless on my laptop and run the OOKLA speedtest application.  With this app I usually get similar results to the IPv4 of the comcast speed test.  Sometimes I get the faster speeds of IPv6.

  When I have a wired connection to the router I get download speeds of 30mbps.

  My question is why can not I get slow speeds of download IPv4 and what can be done to improve the situation?

  Thank you

  Router and wired Configurations
  Configuration DHCP reserved IP addresses for all devices ON the router. This ensures that each devices gets its own IP address when turned on and connected, eliminates conflicts of IP addresses and helps troubleshoot and maintain some consistency for applications that need to connect and mapped drives.
  Make sure that the devices are configured automatically obtain an IP address.
  Disable http://en.wikipedia.org/wiki/Ipv6 on the router, select Local connection only and test with IPv6 active. Re-enable after the test.
  Disable the power management on the Ethernet on any PC or laptop

  Speedtest test servers. Some servers may be busier than others.

  Wireless configuration
  Verify that the default SSID (linksys) is modified. To ensure that the different SSID names are used between each WiFi 2.4 / 5 GHz radios for dual-band routers. Can be anything and not something that is already used by the neighbouring WiFi routers.
  What wireless modes do you use?
  Try the mixed mode, single mode G or N or B/G/N, no joint 2.4 Ghz and single mode N or mixed on 5 GHz?
  To activate the Protocol Router support AC AC wireless, you must have the below setting that is configured on the 5 GHz:
  Wireless security: "WPA2 Personal" (not mixed)
  Wireless protocol: 'mixed '.
  Channel width: 'Auto '.
  Width of the channel to Auto 20 / 40 Mhz or try 20 Mhz only.
  Try to set a manual channel to a channel open or unused. 1, 6 or 11. 11 for Singlemode N if the channel is clear. 13 for the regions of the EU. Try the channel 48 or 149 on 5 Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
   http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.XML&PID=80&r...
  Disable the WPS
  What security mode are you using? Privilege 'egi' is 'WPA2 Personal"(not mixed). http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
   http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=19073
  What wireless devices you have connected?
  Ensure that all devices with WiFi card drivers are updated.
  Home Wireless 2.4 Ghz or 5 GHz or WiFi APs phones around?
  Any other WiFi router in the region? Link > http://www.techspot.com/downloads/5936-inssider.html allows to discover. Use v3. How many?
  WMM support must be enabled for single mode N Wireless work.
   http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&articleid=5471

• BlackBerry 10 Adobe Flash on the new OS

  Just upgraded to 10.3.1.1565. When I tried to use the Ookla speed test it says I need Adobe flash. I watched ideas as go into settings and turn it on but it is not there at all. I tried to download it but get a message that it is not available for my browser or OS... any ideas?

  Flash on mobile devices is no longer supported by Adobe. That's why he disappeared. In my view, that there is an Ookla Speedtest available in the Android app store app.

• Internet MacBook becomes very slow

  THE PROBLEM

  A week ago from the internet on my Macbook has become very slow. Web sites load then, but it may take up to five minutes on some occasions, or even longer. This happens systematically 10 seconds to 5 minutes after the connection to the web. At first everything is super fast, then all pages/apps using the internet starts to turn.

  ATTEMPTED SOLUTIONS

  • Replaced the modem & router: I bought a new modem-router combo to replace my original separate modem and router, no change in question.
  • Tried a third modem/router: a friend gave me his modem router to try and the same issue. (In both cases I had my ISP to update the MAC address)
  • Tried other devices: I tried the connectivity to other devices (iphone & ipad) and found no problem. Speedtest app appears 32mbps to the low and 5 Mbps + constantly.
  • Tried another browser: was using firefox, I tried Chrome - same question. In addition, any application on my computer using the web runs slowly, no browsers only.
  • Tried to connect to the Internet through direct ethernet modem: no improvement
  • Tried to restart the computer and the modem/router: it is 7 + times for two days with no change
  • Tried to connect to the web via a mobile hotspot on my phone: problem persists.
  • Updated my computer and all applications: no change
  • I started in safeboot and the problem disappeared

  GENERAL INFORMATION

  • Model name: MacBook Pro
  • Model identifier: MacBookPro8, 1
  • Processor name: Intel Core i5
  • Processor speed: 2.4 GHz
  • Number of processors: 1
  • Total number of cores: 2
  • (By heart) L2 Cache: 256 KB
  • L3 Cache: 3 MB
  • Memory: 8 GB
  • Running OSX El Capitan 10.11.6
  • Modem router: Motorola 6580
  • ISP: wow!
  • The only recent change I did was update flash.

  Thank you

  Hello Indianajoe7,

  Thank you for using communities of Apple Support. It is my understanding that the internet is slow on your MacBook Pro. I know how important internet speed can be for many applications and General everyday use. I'm happy to help you.

  You did a great job trying to fix this yourself! Given that the problem didn't occur in safemode, our next step is to check your login items. Please follow the instructions below:

  Important: To print these instructions, click the Share button in the Help window, and then choose print.

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connections

  Have a wonderful day!

• Best placement of router?

  My Airport Extreme is located on one side of my two-story home, in an office on the first floor. I have an Airport Express located downstairs, to the other side of the House.  My wifi coverage was uneven at the bottom. I recently read a study suggesting that a router should be ideally located (not possible for me) and that the router is on the ground at least four or five feet.  I tried this and now they have about five feet above the ground.

  My question is, the coverage would be even better, if I placed the higher router?

  So far the Speedtest app on my iPhone show my download & much more quickly than what I used to get upload.

  Thank you

  Wireless extension across the diagonal of a House of two floors... through as a very solid material is possible always will lead to worst possible wireless. Lifting the Express to get over some of the furniture is a little help... upper which will probably meet diminishing returns.

  The best way to solve the problem is the use of ethernet.

  If your House is large and difficult then just ethernet to the room directly under the location of the extreme and put another extreme in there... Buy a second hand gen5 AE on ebay etc... It is far superior to other express. Set up roaming to the network.

• Why is the internet on my Apple TV 4 speed faster on wifi and ethernet?

  Hello

  I have an Apple TV 4. I tested my internet speed using unit SpeedTest app. When I connect Apple TV to my router with an ethernet cable (5th), my download speed is 45 Mbps. When I unplug the ethernet cable and use the wifi, the download speed is 89 Mbps. Can someone explain why this could be? It should be the other way around.

  Thank you
  Ryan

  Hello

  I think that this may be due the port ethernet ATV 4 being only 10 / 100 Mbit/s. Your WiFi network is probably give at speed higher than 100 Mbit/s, allowing a faster data rate.

• Guest WiFi network much slower than normal on the network

  Speedtests leave a device attached to the 5 GHz wireless guest network are much slower than when the same device is connected to the normal 5 GHz WiFi.

  I measured reproducible all about 7ms 18/10 down on the network of comments and 1ms 320/250 Mbps on the normal network. Same place, same camera, same speedtest app, same test server.

  Similar results of multiple devices (laptop, Windows, iPhone 6 s). No change after a reboot. QoS is off. Firmware is 1.0.6.28_1.1.83.

  What could be the reason? I don't think that I had the same problems a few months ago, but I has not changed settings since then, except for the upgrade of the firmware when a new version appeared.

  Thanks for your advice.

  that version was pulled and pulling FW rarely happens... back having previously worked FW

• How to open a *.mlog file in Windows XP

  When I ran IBM ThinkVantage program Rescue and Recovery and restored a backup of the system to the system of Windows XP SP3, I had instead of my Outlook.pst file *.mlog files. When I try to open .mlog file, menu appears. If I click on "With" and do a search to find a program to open the .mlog, I get nothing.

  How to open file *.mlog? How to restore the contents of .mlog to .pst file?

  It happened not only after may or June MS updates. I don't know if it updates to change the way in which the .pst files have been backed up.

  http://www.HOWTO-Outlook.com/HOWTO/filesandsettings.htm

  first read this

  http://www.TechRepublic.com/blog/five-apps/five-reliable-Outlook-PST-file-repair-tools/1273

  Read more top

  http://www.google.com/#sclient=psy-ab&q=.pst+files+are+now++.mlog+file&oq=.pst+files+are+now++.mlog+file&gs_l=hp.12...4625.15547.0.17156.20.15.0.0.0.0.2234.15469.2-4j2j0j1j1j2j3j2.15.0...0.0...1c.1.18.psy-ab.8vAVHDJ1tpA&pbx=1&bav=on.2,or.r_qf.&bvm=bv.48572450,d.dmg&fp=22ff624f670d7fc6&biw=1024&bih=562

  Google search page for that matter

• Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.

  Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.

  I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.

• How to check if a custom Attachment Manager is installed

  Hey guys,.

  I have critical app run for our sales outside the field people and it uses an Attachment Manager custom that autoruns to the startup of the phone.  I want to check that the Manager is registered when they launch the actual application, so I can re - charge Manager if necessary.  Is there a way to do this?  Is it still necessary?  I am a fairly defensive programmer and you want to make my apps as reliable as possible, and as I said it is a critical application that relies on the Attachment Manager.

  Thank you

  Wade

  There is no API for this query.  After recording with AttachmentHandlerManager your application can write some sort of object of success in the duration of BlackBerry store.  When your application starts it could check for this object.

  Please note that the store of runtime is allowed out when is reset, so if the user resets their device the custom AttachmentHandler and runtime database object would disappear.

• Oracle 12 c with RMAN database backup

  Hi All-

  I started back to the top of one of my PDB using utility RMAN following the instructions on the link below.

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/12C/R1/PDB/pdb_pitr/pdb_pitr.html

  --Connect to Oracle RMAN.
  rman> Connect target /
  --Set the Oracle RMAN backup device type and backup file location.
  rman> configure channel device type disk format '/stage/db_backup_files/cdb1/%U';
  --Turn on automatic backup of control files.
  rman> configure controlfile autobackup on;
  --Back up the database and archive logs.
  rman>backup database plus archivelog;
  rman> exit
  

  Back to the top has been done successfully, but when I started with the recovery process he gave me error reporting collection.

  Run {set until what SNA = 2263440; restore database connectable to pdb2; retrieve auxiliary destination of the pluggable database pdb2 = "/ stage/db_backup_files/cdb1 '; alter connectable database to pdb2 ;} open resetlogs}

  This is the track to RMAN

  Recovery Manager: release 12.1.0.2.0 - Production on sat 22 Aug 12:22:44 2015

  Copyright (c) 1982, 2014, Oracle and/or its affiliates.  All rights reserved.

  RMAN > Connect target /.

  connected to target database: RELIABLE (DBID = 1028507357)

  RMAN > run {}

  2 > ALTER DATABASE connectable to MultiPlay NARROW;

  3 > set up what SNA = 14899894;

  4 > restore database pluggable MultiPlay;

  5 > restore database pluggable MultiPlay;

  6 > alter database connectable to MultiPlay open resetlogs;

  {7 >}

  using the control file of the target instead of recovery catalog database

  Statement processed

  executing command: SET until clause

  From restoration to 22 August 15

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 22 type of device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00035 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\SYSTEM01. DBF

  channel ORA_DISK_1: restore datafile 00036 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\SYSAUX01. DBF

  channel ORA_DISK_1: restore datafile 00037 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\MULTIPLAY_USERS01. DBF

  channel ORA_DISK_1: backup E:\APP\RECOVERY_AREA\RELIABLE\40A433F530464F3BBF2E7C0B1553ECE8\BACKUPSET\2015_08_22\O1_MF_NNNDF_TAG20150 piece reading

  822T115328_BXJ5C182_. BKP

  channel ORA_DISK_1: piece handle = E:\APP\RECOVERY_AREA\RELIABLE\40A433F530464F3BBF2E7C0B1553ECE8\BACKUPSET\2015_08_22\O1_MF_NNNDF_TAG20150822T115328_BX

  J5C182_. Tag BKP = TAG20150822T115328

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:01:05

  Restoration finished in 22 August 15

  From pick up to August 22, 15

  using channel ORA_DISK_1

  RMAN-05026: WARNING: following tablespaces set applies to the Point in time specified assuming

  List of tablespaces should have UNDO segments

  SYSTEM tablespace

  Tablespace UNDOTBS1

  Creation of automatic instance with SID = "zbnt."

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at 22/08/2015 12:24:56

  ORA-19852: error creating services for the instance auxiliary zbnt (error 0)

  ORA-27302: failure occurred:

  ORA-27303: additional information: could not start the instance

  Thank you

  Siradji

  Just a wild guess

  You do not use this script in a command as Administrator window

  Therefore, you won't be able to create any service.

  I also have a question: your only troubleshooting activity consisted of hitting CTRL + C and CTRL-V, is not it?

  It's so boring to most of the people here do not even TRY to solve their own problems.

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• Can't seem to app store with Safari, all other pages load on the 2nd attempt

  Since January 29, first my wife and I are having problems with Safari 9.0.2:

  n ' matter what Web server that I visit are left with 15% of the first page, in page reload or visiting another page on the server, it loads ok

  -Unable to connect to all the app store, very difficult to identify or visit apple support communities

  -all Web form entries give problems: I copy my text and reload the page to paste into it for a 2nd attempt to send it

  -part of pages, including this one, appear in simple html

  Internet connection seems ok, on repeated speedtests, I'm moving 20 ms latency, 16 Mbps download and 1 Mbps upload

  ISP says regional work is underway, but it might not be related to my problem

  e-mail (via Apple mail) seems to be a bit slow but reliable overall.

  Problem is repeated on 2 iMacs and 2 iPads using LAN and VLAN on the same modem.

  Adblock and plug-ins are disabled

  Where would be the problem?

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis