opacity does not

Similar Questions

• Fade opacity does not

  I tried all night don't get my graphics still to fade smoothly - nothing works. I used the manual opacity effect from 0 to 100% and it does not recognize the percentages between the two, but just jumps from 0 to 100 in a framework any where to move keyframes to, or how far apart they are. I tried to use the film and cross dissolve effects. They do not work either. I never used to have a problem with this - there is a bug with the last update for Premiere Pro? (I also tried to restart the program and restart my computer. The bug is still there)

  I'm not aware of this bug.  Have you tried turning off the CUDA?

• Photoshop CC 2015 - my opacity does not work

  I just installed Photoshop CC 2015 and the opacity of the brush does not at all. I tried to reinstall my tablet drivers, restart the computer, the drivers, turn off the computer, everything. What seems to be the problem and how can I solve it?

  HA! I found the solution! All I had to do was go to services and restart the service of Wacom listed according to a post I found on the Internet for what opacity and pen pressure stops working: ORIANART

  Everything works fine now.

  Thank you guys like the staff and the members of the forum for answering so quickly in any case. You're awesome. (:

• Movement of scrolling opacity does not fade

  So it took me a while, but I finally understand the Parallax scrolling motion effect in the Muse.

  Now I try to impliment the opacity part in a text that scrolled also.

  So there is text on the screen when you open the page. When you scroll this section scrolls upward about 100 pixels and Faints, that works perfectly well, is the following, I'm having the problem with. I want to have more text under the starting paragraph to opacity 0, because it is scroll to fade in opacity 100, then go back to 0 when you scroll to the top more. Is closest, I received when I put melted position 1 in the same place as the T-handle, it starts at 0 opacity, but then when I scroll there is no melted, it jumps to opacity 100 then fades to 0 as it is supposed to. If I put melted position 1 in a place higher than the T handle it starts about half opacity, the point is that I can see, while I scroll it goes to the opacity 100 then faints. Don't forget, I'm the opacity for the position of fade 1 set to 0.

  So I tried a bunch of different places to fade position 1 but without success. Can someone tell me what I am doing wrong? Or for some reason is it not possible to fade with the effect of movement of scrolling opacity? Can you only melted in released? Thanks in advance.

  Wow too bad, I thought to it. All I had to do was set the fade position 1 to 0.

• Scroller opacity does not retain its values on a PNG...

  When I try and add a scroll of opacity of a PNG logo effect I am able to enter values (sometimes) for the keyframe, opacity, etc. However, when I click and then reselect the PNG the box has been disabled and all values are empty.

  Is this a bug or I'm doing something wrong?

  Please check with another simple image a new page, apply the opacity, deselect, then select new. This would help isolate the problem.

  Thank you

  Sanjit

• Gadgets for Windows Sidebar does not display correctly

  Hello
  I just installed a new antivirus-Sophos which automatically uninstalled my previous installation of McAfee that came with my Dell laptop.
  Am running Vista SP2 32 bit, Core 2 Duo, 4 GB of RAM, @2 GHz T6400.
  After installing antivirus and subsequent reboot, my sidebar is displayed and so do the gadgets, but they are all "corrupt" and not displaying correctly. For example, the clock is dark, and change the opacity does not allow me to see the time. Calendar, notes, and UC only appear as a vertical white line. None of them appears correctly.
  Help, please.

  Hello
  I managed to get, it works by using the link below, in case anyone has the same problem in the future:

  http://www.Vistax64.com/tutorials/161046-Windows-Sidebar-gadget-not-displayed-correctly.html

  Kind regards
  Alysson

• Why the opacity mask texture does not work?

  I am trying to add a texture to a vector shape in Illustrator and I am doing it by creating an opacity mask. I try to use textures of paper for this. For some reason, it does not. First, I tried to paste the texture after clicking on the area of opacity mask in the transparency window. It didn't work, so I tried a suggestion I saw in the forum and stacked two layers, as you would for a clipping mask and some times and it still doesn't work. Instead of a paper texture, rectangle remains a solid color. I thought that this could be because the documents I used were too subtle, a texture so I tried to use a stronger texture. He always remained a flat color. I can't understand what I'm doing wrong. Is there something on my settings or preferences that is the cause?

  I put your texture on a yellow form with black wavy lines.

  That seems to work. I put a red rectangle on a layer below to show what is the mask.

  The result is perhaps too subtle for the black lines (just like painting on paper with a solid black ink).

  I would try to hide the separate lines of the yellow background with a more varied texture.

  

• The appearance Palette opacity change does not stick

  It is obvious that by changing the settings in the appearance palette line & fill that describes all of the following agree - well, it's sort of working-e.g. eliminating lines altogether and also change the fill of a new color remains in effect I use then the pen tool, but any opacity change does not stick. I put 20% before using the pen tool, but whenever I use the pen tool, it is up to the 'default'. It forces me to, and then select the shape you want, this is the end to change the opacity, so I can see what I'm doing.

  Because everything is supposed to have the same opacity, it would be a great time saver to have my desired setting stay at 20% and will not return to the default value. I know that under SELECTION > OBJECT > ALL on THE SAME LAYER can change everything at once, but opacity lower as I work helps me build the forms correctly in the first place.

  Can someone tell me what the devil I'm doing wrong?

  Try to uncheck the Art has basic appearance in the appearance, new Panel soar.

• CC opacity keyframe on the black and white adjustment layer does not work

  Hello

  I use the first cc under w8.1 pro

  Well, I noticed a strange behavior

  I added a layer of regulation, the black and white effect and several keyframes

  seems that first reads only the first

  for example

  (1) key-> @0 % frame the second keyframe @100 %, the video is all in color, no matter how much of I add keyframes

  (2) the first key @100 second @0 % (opacity) the video is in black and white, again no matter how many I add keyframes, only the first is read

  I tried the black and white effect on video titles, and so on and it works perfectly, it does not work on the layer of regulation

  I tried other effects on the layer of regulation and they work

  is a bug?

  There is a known bug in previous versions?

  Thank you

  I can reproduce the problem on my system, 8.1 or Mac OS 10.10.3 body.

  MtD

• Precomposed layer does not recognize the opacity setting (bug)

  Hello

  I have a very simple layer précomposé including a layer of unique text with a shadow (layer style). However, it does not recognize the opacity setting in the layer main, even when the value to 0%, and the playhead is not yet on the layer. If I change the opacity in the precomposed layer I see come to the main layer, but change the opacity in the main layer does nothing.

  I reported this to Adobe as a bug, someone at - it any other ideas?

  Thank you

  Antony

  

  There is a difficulty. Apply a layer to your demo style, then turns off all styles. CR will now evaluate the layer styles in your source model and make them in the proper order.

  

  Why it works? You must understand the operation of the CR. When you turn on the continuous rasterization the layer type is identified before any effect or transformations take place. That's why you can scale a vector without problems layer if CR is turned on. This explains why a 3D demo that contains a 2D layer will be rendered as a 2D layer.

  When you apply a layer Style you change the layer type in the same way you edit a type of layer from 2D to 3D. If you want to have transformations applied to the layer style in the source file, you must change the type of the pre-comp Layer Styles layer layer.

• STROKE opacity layer does not

  In the image below on the largest item, I have a stroke with 0% opacity but as you can see is white it should be transparent?  I even changed the blending mode to multiply and the line of white color the rest.  What's wrong?  I set the opacity to 0% to test if something was wrong and this confirms.

  

  OK I've updated Photoshop CS6 version 13.0.1 and it still does not work.  Can someone help me solve this problem?

  I realized it's the white background that is the cause.  I set time to 'internal' well, then, what is the problem?

• Opacity image key does not work

  I have a few clips that I applied the effect on time-remapping.

  I take this sequence and put it in another sequence

  At the end of the new sequence, I just apply opacity keyframes to make a fade

  The fade does not work and the opacity acts as if it was 100%, even after.

  Why this happens where PPro CS5 on Win 7 violates an opacity simple keyframe for a sequence with time-remapping?

  Even if I put a black color overlay on top of the end of the clip, it does not.  Very frustrating that something this simple does not work.

  This has been resolved in my post on the forum. Here's the correct answer:

  

• HEALING TOOL DOES NOT WORK USING THE FILES DNG OR ANY OTHER TYPE

  I tried to correct this eternity, or since I signed.  I'm up-to-date on versions and use late model Mac.  I have also read the forums and followed all the advice, but he does not want to heal.  Any other suggestions?

  What is the opacity?  Show us a screenshot of the brush Panel.

  

• PP 2015.3 edit video keyframe in order with the pen tool does not

  After update, cannot modify keyframes of video tracks in sequence with the tool pen.

  Yes, I chose the key and assured edit keyframes has been selected.

  When clicking on the video it becomes white and does not change all (trying opacity), yet it's audio track is very good and allows the same type of mounting of volume.

  This is the second issue since update. Any help would be appreciated... maybe it's something I'm not getting or just missing?

  Thank you

  Shaggy

  Click on the FX box on the element in the timeline, and then select opacity.

  

  For some reason any on 2015.3, it has been set by default to the Motion.

  MtD

• Titles/transparency/alpha on DPX sequence does not work

  Running CC 2014 and 2015 when I try to put a title first, PSD or even another DPX sequence at 50% opacity on a DPX sequence it turns the screen black. Anyone run into this before?

  Windows 7 x 64 machine. Can be done all this in AE, fine, but for some reason, that it does not work at first and I had really no dynamic link rather the entire film of AE make...

  I've seen similar to the side before mac strangeness.  Out of curiosity, what resolution do you work in?  Also, what format to preview is the sequence on?  Maybe try to change the format to look at something different.  When this happened to me on the side of mac, my preview format has been in mpeg I-frame.  When I changed to ProRes the problem disappeared.  I was wondering if there is something to do in this area.