OPC on Start Server application RT (-356698) error

Similar Questions

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• An error occurred trying to implement a server application files

  Hello
  
  I have the problem with concurrent Manager logs and output (I'm on R12, windows) following:
  
  "An error occurred during the attempt to establish a connection to server application files with the FNDFS_APPLTOP_eviasl node. There may be a network configuration problem, or the TNS listener on the node as fndfs_appltop_eviasl cannot run. Please contact your system administrator. »
  
  There are a lot of similar topics and several metalink (including below) notes on this subject, but mine seems to be a slightly different question.
  
  
  Troubleshooting the "error occurred while he was trying to establish a connection to file Applications Server' [ID 117012.1]
  
  As you can see from the error message it says the name of the node is FNDFS_APPLTOP_eviasl but uname - n only returns eviasl. Whence this APPLTOP?
  
  J:\oracle\VIS\inst\apps\VIS_eviasl\ora\10.1.2\network\admin\tnsnames.ora contains entries like below one (entire file is very long, but it does contain no entry with APPLTOP):
  
  FNDFS_eviasl = (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp (PORT = 1626))(HOST=eviasl))
  (CONNECT_DATA = (SID = FNDFS))
  )
  
  Another ORACLE_HOME tnsnames file contains only entry below:
  
  rep_eviasl_VIS_eviasl_TOOLS.xxxxxx.xxx = (Address = (Protocol = TCP)(Host=eviasl) (port = 1950))
  
  Yesterday, I had the problem with concurrent Manager, so I was running adcmclean to remedy and this problem started after that.
  
  Any help would be appreciated.
  
  Concerning
  Piotr
  
  Published by: PiotrekJ on July 2, 2012 12:07

  I'll run autocfg more later once again as well far as I remember he finished without any errors.

  Please clean table FND_NODES before running AutoConfig - how own non-existent nodes or addresses IP of FND_NODES [260887.1 ID]

  Thank you
  Hussein

• Issue by starting the application server.

  I installed Tux 8.1 under windows 2003 on PT 8.48.16.
  
  Whenver I'm trying to start the application server I m getting the error message below.
  
  I had tried all the possible solution given on the support site, but no luck.
  
  Beside that, I also get a pop-up images that say ' an unhandeled win32 exception occurred in tmadmin.exe [3004]. "
  
  
  Can you please give advice about this.
  
  
  ==========
  Error: -.
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: a new file system is created. (size = 1120 blocks of 512 bytes)
  
  073658.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: E:\psoft\PT848\appserv\CRPROD\PSTUXCFG TUXCONFIG file was created
  
  073705.DCB - STG-APP3! PSADMIN.3964: Attempt to Begin on field CRPROD
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: failed to create the message queue
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: cannot create the queue
  
  073717.DCB - STG-APP3! PSADMIN.3964: Attempt to end boot on domain CRPROD

  If you are using a terminal server server, make sure that you connect to the console on the server session (using mstsc/console or mstsc/Admin, depending on your windows version of the client).

  Kind regards
  Bob

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Terminal Server service to start, get the message "system error has occurred."

  I just reinstalled Windows 7 Professional and the first and the only thing I did was performed in the command prompt to enable remote desktop:

  reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f
  

  netsh advfirewall firewall set rule group="remote desktop" new enable=YesWhen I try to connect via RDP, it does not work and that is because term service is not started nor will it start. I open an elevated command prompt and type "net start termservice" and I get error 5. In services.msc it does not let me start it and it displays an error.
  

  NOTE: THIS MIGHT BE IN THE WRONG WINDOWS TOPIC SINCE I COULDN'T FIND A TOPIC THAT I THOUGHT WOULD BEST FIT MY SITUATION.
  

  On the flavors of Windows that are supported on the desktop remotely, you enable this feature via the control panel / system / remote settings / Remote. There is no need to hack the registry or start a particular service. Then you would see this registry key:

  

  To test the RDP, you can use this command on the host itself:
  Telnet %ComputerName% 3389

  To set a different port number, you must change these registry data:

  HKLM\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• Cannot start the application... Error code 13

  I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

  Thank you

  I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

• I get the A12E5 error code when starting Adobe Application Manager, I use a Mac and want to have Illustrator running

  I get the A12E5 error code when starting Adobe Application Manager, I use a Mac and want to have Illustrator running

  Products of Adobe Creative Cloud installation error A12E5

• Start the application error: (0xc000001d)

  When I try to open Adobe Illustrator creative cloud I get an error message that is displayed, it says "the application could not start properly (0xc000001d)." I tried to uninstall and reinstall the program, it does not work. Also, other programs I have installed through CC start at all when the user clicks on the Open button. Help!

  Please see the links below:

  Re: Error 0xc000001d on start

  Application to open (0xc000001d)

  Let me know if it helps.

  Concerning

  Megha Rawat

• FDM Server Application error during Setup.

  Hello

  We have our EPM system on linux and FDM on windows server 2008.

  
  

  We strive we configure the server applications FDM. But it gives an error "an invalid object name has been specified. The object does not exist or the specified string is displayed.

  I think that maybe this is related to DCOM rights.

  We use the administrator user.

  Cordially.

  Don't know what update you're looking for?

  You said that you re-install the software and the problem is solved.

  I stressed the steps that you could try rather than make a reinstallation of the software.

  Is there something else you need?

• starts the application server

  Hello
  in tools 8.52 in 2008, in which file should I register the domain name to start the application server automatically restart when?
  He was psntsrv.cfg in PS_HOME/appserv 8.49.
  Thank you.

  start the PSADMIN and choose the option
  (6) Service configuration
  and then
  (1) configure Windows Service
  Provide the name of CRP, the appserver you want to start automatically as a service

  In the Administration of PeopleSoft Services menu option
  (2) install the Windows Service
  This will create a new service, in my case
  PeopleSoft_C__apps_psoft_config

  Kind regards

  Halin

• Error when starting Server Admin

  Hi all
  
  I am trying to start Admin Server and get this error:
  ---------
  
  < 6 January 2012 12:08:11 > < INFO > < NodeManager > < output server log file is "E:\App\Oracle\Middleware\user_projects\domains\IDAM_Dev_domain\servers\AdminServer\logs\AdminServer.out" >
  
  < 6 January 2012 12:08:12 PM PST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
  
  < 6 January 2012 12:08:12 PM PST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
  
  < 6 January 2012 12:08:14 PM PST > < Info > < WebLogicServer > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 19.1 - b02 Sun Microsystems Inc. >
  
  < 6 January 2012 12:08:15 PM PST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.4.0 Fri dec 17 20:47:33 PST 1384255 2010 >
  
  < 6 January 2012 12:08:18 PM PST > < error > < management > < BEA-141244 > < errors diagram validation when parsing E:\App\Oracle\Middleware\user_projects\domains\IDAM_Dev_domain\config\config.xml - qname for xsi: type invalid: 'ext:oam-servlet-authentication-filter-ia-providerType' in the @http://xmlns.oracle.com/weblogic/domain realm element >
  
  < 6 January 2012 12:08:18 PM PST > < error > < management > < BEA-141244 > < schema when parsing E:\App\Oracle\Middleware\user_projects\domains\IDAM_Dev_domain\config\config.xml - E:\App\Oracle\Middleware\user_projects\domains\IDAM_Dev_domain\ < unknown > validation errors: 14:9: error: unable to load the java type corresponding to t=oam-servlet-authentication-filter-ia-providerType@ http://xmlns.oracle.com/weblogic/security/extension >
  
  < 6 January 2012 12:08:18 PM PST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason: Schema Validation error [management: 141245] in E:\App\Oracle\Middleware\user_projects\domains\IDAM_Dev_domain\config\config.xml see log for more details. Schema validation can be disabled by starting the server with the command line option:-Dweblogic.configuration.schemaValidationEnabled = false >
  
  < 6 January 2012 12:08:18 PM PST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
  
  < 6 January 2012 12:08:18 PM PST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
  
  < 6 January 2012 12:08:18 PM PST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
  
  < 6 January 2012 12:08:18 > < FINEST > < NodeManager > < waiting for the process to die: 1648 >
  
  < 6 January 2012 12:08:18 > < INFO > < NodeManager > < server failed during startup, so won't be restarted >
  
  < 6 January 2012 12:08:18 > < FINEST > < NodeManager > < returned runMonitor, finished setting = true and notification servers >
  --------
  
  Please suggest.
  
  Thank you
  PS

  I had this problem and found the solution:

  Open the nodemanager.properties ($MW_HOME/wlserver_10.3/common/nodemanager/)
  and StartScriptEnabled set to true (default is FALSE). This solves the problem for me.