Open a session SSP and permission errors

Similar Questions

• could not open windows live messenger and the error code 80040200

  Original title: error code 80040200

  I could not open windows live messenger and the error message I got was... error code 80040200... How can I fix this... Thanks for your help

  Hi NateGoodman,

  When you use Windows Live Messenger and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

  I hope this helps.

• I for got my iam password cannot open a session now and in my system there that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  I forgot my password iam unable to open a session now and in my system, there is that no other administrator accounts are available. How to connect

  As you go now, having a spare admin account is a very practical thing - if you think of it in advance. Fortunately, there are many other options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• How to register an open TCP session ID and use it in an another VI?

  what I want to achieve:

  Open a TCP session in a VI, save the session ID to Teststand, then after some process, writing/reading/close the same TCP session in an another VI.

  My question:

  1. how to pass the ID of TCP session between labview and Teststand

  2. the use of the same TCP session through different screws

  Thank you

  You could convert the reference to a U32 and sent this Teststand u32.

  Be aware that the VI that opens the reference should be kept active (= running) or LabVIEW could close the reference in silence.

  Tone

• PpsClient::init: ERROR: open: ' / pps/services/pim/session? expected' 'Permission denied' open failed:

  Hello

  I get the error above, when I run the application. I call a simple function to send an e-mail by using the messageService API.

  When I run the MMSsample, it does not give this error.

  Successful completion of the MmsSample:

  New Session request
  Open success:
  Details of the session ""https://discoveryservice.blackberry.com/discoveryPoxmlServlet/ " "1.0""127.0.0.1"8888"
  creating successful local SMS - MMS account
  XXXX account SMS - MMS
  Call AccountServicePrivate::accounts for the 'messages' and «sms - mms» provider service
  XXXX you account SMS - MMS. ID = 23
  PpsTimeSettingsObject issued::newSettingsData()

  For my Application:

  New Session request
  PpsClient::init: ERROR: open: ' / pps/services/pim/session? wait' "Permission denied."
  Failed to open:
  Details of the session ' ' ' ' ' ' 0
  creating successful local SMS - MMS account

  I don't know what is the problem?

  Do you have the correct permissions?

  To use the e-mail service, you must set the access_pimdomain_messages to access the e-mail and messages of pine and the authorization access_sms_mms to access text messages. These permissions are defined in the file of the bar - descriptor.xml of your project.

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  Hello Mark.Mac,

  Thank you for your message.  Click HERE to run the Windows Installer Cleanup utility.  Once you have run the utility of your computer restarts and the functionality test.  You can also watch in download/install Windows Live Photo Gallery HERE.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• I am trying to open a session in creative cloud, but it keeps disconnecting me and I don't know why?

  I am trying to open a session in creative cloud, but it keeps disconnecting me and I don't know why?

  Error: You are no longer connected to creative cloud applications

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Firefox sometimes does not open and an error message is displayed

  Sometimes, when I try to open Firefox, it displays an error message saying that the file is not found. I have to close the dialog box and try to open the browser again and again until it actually opens. In general, this happens in the 2nd or the 3rd test, but may take longer. In addition, this only happens whenever I try to open Firefox. Is there a problem in the installation? The program itself works completely fine when I'm on it to open it.

  Maybe it's your AntiVirus software take some time to allow Firefox work.

  You can temporarily disable or uninstall your AV for that study as a possible reason. Maybe for safety run all such a test if not connected to the internet.

  • It is a Microsoft Article on error
    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    http://support.Microsoft.com/kb/2669244

  One of the causes mentioned are 'your antivirus software may block the file'.

• I get an error message that "a copy of Firefox is already open. Only one copy of Firefox can be open at a time"and I have no open copy.

  I get an error message that "a copy of Firefox is already open. Only one copy of Firefox can be open at a time"and I have no open copy. How can I fix this problem? I like firefox because it runs many technical programs on the web that do not work with safari. I have FireFox installed on my PowerBook MacPro OS X 10.7.5 32.0.1 version. My activity monitor shows all activity of FireFox, so don't know not what he sees

  Check out these links;
  http://www.bing.com/search?q=Firefox%20not%20Close%20mac