Open a State of a command button - statement of Script

Similar Questions

• Sidebar error: have .ini file, but when I try to open it States, "sidebar will be closed.

  Sidebar does not work. have the .ini file, but when I try to open it States, "sidebar is going to end." Any help

  Hello

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------

  Then proceed as follows:

  How to restore the sidebar of Windows?
  http://support.Microsoft.com/kb/963010

  If necessary to do it manually:

  Logon as Admin - Start - type in the area of research-> COMMAND - find top - RIGHT CLIC on it-
  RUN AS ADMIN

  Replace C:\Program Files\Windows Sidebar by copying and pasting this command->

  CD C:\Program Files\Windows Sidebar
    
  Press enter (this is assuming that your sidebar is on C:, otherwise use the letter of the drive is on)

  Guest should be--> C:\Program Files\Windows Sidebar >

  Then copy / paste each of them following their tour each come into

  regsvr32-u sbdrop.dll

  regsvr32-u wlsrvc.dll

  regsvr32 atl.dll

  regsvr32 sbdrop.dll

  regsvr32 wlsrvc.dll

  Sidebar should now work

  Type in the search-> Sidebar box - find top - make a RIGHT CLIC top - RUN AS ADMIN

  ========================================================

  Close the sidebar for that.

  Something else for the settings.ini - run AutoRuns and look at the entries SideBar - Gadget
  are there pointing to no longer like those temp files or uninstalled or
  gadgets run do not? Those who will reflect the "yellow icons" on the left side and the
  folder/files do not exist. If so right click on them and delete - Reboot.

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry and
  locations where applications can configure Auto-start of the file settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• best practices of command buttons

  Hello

  I would ask how others view their GUI with several command buttons (OK Boolean button).

  For example, it is a simple application where the user can start data acquisition by clicking on a button with text 'Start monitoring '. Instead of having another button with text "Stop monitoring", usually I just change the label text to "Stop monitoring" button, so it is obvious to the user that clicking on that will stop the process of monitoring the implementation (in the case of this button, I read the text of the actual label with property node in order to decide what message action to the loop the loop handler data acquisition of) GUI).

  If I have another button with the label as "Record of startup file" text, I do the same way: after saving the file, change the text 'Stop-save file.

  To avoid unnecessary additional programming, this button is in the enabled state if the application is already in the State of "monitoring". In addition, if there is a current folder (+ DAQ obviously), the user cannot press the button "stop monitoring". So according to the status of applications, some of the buttons are enabled, some in 'grey disabled' State.

  I wonder how others do their app/GUI?

  I don't know if it's a good way to do, but at least I can avoid check additional status of programming and by minimizing the number of buttons...

  I use the Boolean options text in the Properties menu where you can have different text for the States TRUE and FALSE to your buttons.  This eliminates some of the code that it sounds as you write.

  Play / Pause are the two options I usually use if buttons.

• How LabVIEW can press a command button in the Access form?

  Situation: access database with a command button, which generate code after you have pressed

  Task: LabVIEW open the access database, you press the command button and read the code

  Status:

  • Use activeX to open data access - ready
  • Press the control button - open
  • code - open reading

  Problem: is there a possibility that LabVIEW automatically press the button in the Access form?

  Dear Mike,
  Thanks for the reply. You are right that MS Access is not really a database. ;-)

  When the operator will push the button, the program generates a serial number and add the new number in the article table.
  Therefore, by pushing the button means process this code.

  Solution
  After that I became the password to unlock the database, I have check the code behind the button and build it with LabVIEW.

  So it is not necessary to press the button :-)

• After you click the command button, the user can not change form

  This form with a command button to the Page 5 that duplicates the page: http://pardons.delaware.gov/pdfs/pard_app.pdf

  If the user running this command button and then closes and opens again the form, the user is more able to add or change anything whatsoever in the form. Instead, the user gets an error message that says "this document enabled extended in Adobe Acrobat Reader DC. features." The document has been changed since its creation and use of the extended functionality is no longer available.  Please contact the author for the original version of this document. "Is there a way to fix this?  Thank you.

  FYI, the JavaScript code for the command button is the following:

  var fld;

  var arrayFields = new Array (this.numFields);

  (IT) {/ / default is 'this'}

  for (var k = numFields; k; k-) {}

  for (var k = 0; k < numFields; k ++) {}

  FLD = getField (getNthFieldName (k));

  If (fld.name == "txtCrimSumOff_Cnt") {}

  If (fld.value == 1) {}

  FLD. Value = This.PageNum + 1;

  } else {}

  FLD. Value = FLD. Value+ 1;

  }

  var page_start = fld.value;

  }

  }

  }

  Spawn of named model

  var t = this.templates

  strName = "CrimSumOff"; var

  for (var i = 0; i < Extremity; i ++) {}

  {if (t [i]. {(Name.IndexOf (strName)! =-1)}

  myPage var = t [i] .spawn (page_start, true, false); together second opt to false to keep the names of files

  Get the name prefix field that Acrobat will automatically add the new fields

  var f_prefix = 'P' + (page_start) + '.' strName + '1';

  Reset the newly created fields

  this.resetForm ([f_prefix]);

  Go to the new page

  this.pageNum = page_start;

  }

  }

  Yes. If you don't have the original version, unchecked, you can open the version activated in Acrobat and select: file > save a copy

  This will create an incompatible version. Note that it will automatically open in Acrobat when you do this.

• Command buttons and lights not working not properly - Satellite U400

  I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
  First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.

  Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.

  So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).

  Is there anything else I could do?

  Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.

  Thanks for any input.

  Hello

  Someone suggested this work around:
  You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.

  Welcome them

• My DVD player does not open when I click on the button

  Hello

  I hope someone can help me.
  My DVD player does not open when I click on the button.

  I tried clicking on eject on the DVD drive icon in my computer and it comes up with an error message.
  I think I deleted the cookies the other day. Who would have something to do with the problem?

  Any help would be greatly appreciated that I really don't want to send my phone to a technician.

  Hello

  Try to manually open the CD/DVD drive.
  Near the eject button, you will find a small hole.

  You can use a small object like staple and could push gently into this hole.

  Usually, this should help to open the drive manually.

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• Satellite Pro L20: Command button on TouchPad collapsed

  I visited two other flaws with my laptop in other posts, compared to those, it's very minor but its still very annoying:

  The command button left TouchPad on my laptop, usually evenly supported by the bottom, seems to have given way to one side, so that it does not work with the same action of spring on one side of the left key. It wobbles like a tooth loose.

  It's this kind of problem easily solved? Until I get a USB mouse, I'm stuck with the TouchPad, but his persistent plastic surfaces scratching against the other is infuriating!

  Your ad just brief comment: I noticed that the quality of the buttons of the mouse on laptops is not the same. On my Tecra, it is really perfect and pressure on any point will give the same result, but on laptops of low budget, like the series L, it is not the case.

  I know it's pretty annoying, but unfortunately there is nothing to do. Because of this, the use of external mouse is reasonable.

• Command buttons Tecra M7 - how to change settings?

  Hi all!

  I have a tecra M7, which has 2 command buttons in the upper left corner. I customized to start 2 applications. Now I want to change one of them but couldn't find how do. Does anyone know?
  Thank you!

  Lives

  Hello

  This function could be modified in Toshiba controls.
  That are in the control panel.
  Simply start the control of Toshiba and there you should be able to configure the button1 and button2 with different applications.

• multiple lines of text on a command button

  Is it possible to get multiple lines of text on a command button.  Instead of a large button with the text "start the Test System".  I would like a big button with 3 lines.

  Beginning

  Test

  System

  If you change the label of the button control in IUR editor you can split the text into lines with Ctrl + Enter.

  If you programmatically set the label, "\n" code integration in the text of the label.

  Both methods work for all types of control, not only for the command buttons.

• Click the command button DOES not

  Hello

  I have a single command button on an UIR embedded in a dll I call TestStand. The button does nothing when you click sort, but when I press or , it works fine. Does anyone can say why this is happening?

  int CVICALLBACK TERMINATE_BUTTON (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  switch (event)
  {
  case EVENT_COMMIT:

  event action

  break;

  case EVENT_LEFT_CLICK:

  event action

  break;

  case EVENT_LEFT_CLICK_UP:

  event action

  break;

  }
  return 0;
  }

  Thank you in advace,

  JulianC

  Hello JulianC, a little research on the forum showed this thread that describes nearly the same situation as yours: you might find helpful advice, especially in LuisG post marked as solution and following.

• hover active command button

  I created a command button through create-> command button menu option. It worked very well, but somewhere in my mucking around, I got it so it behaves as if it is pressed when I move just the top mouse button. I can't find an attribute that could trigger this behavior. Can someone help me with this?

  Thank you.

  
  

• ProcessSystemEvents to make a command button

  Hello

  I put in a program that starts a long series of steps when you push the Start button. I would like to add a stop button to allow the user to interrupt the measurement process. First, I added a ProcessSystemEvents() in the measurement loop. The problem is that not only the Stop button active itself but the other command buttons (installation, read etc) too. I would like to disable all buttons except the Stop button. Is there a function like ProcessSystemEvents(), but only for a command button?

  Thank you

  Hello

  I did not understand what you mean by "button assets itself", but you can use the function SetCtrlAttribute (panel_handle, control_id, ATTR_DIMMED..), to allow or to ban the user input.

• How to get back my menu bar, command buttons, the button refresh and option buttons

  Original title: help

  How can I get my menu bar, command buttons, the button refresh and boxes option on my computer at the top screen

  Hello

  In Internet Explorer?

  1st try F11 - toggle mode full screen in the case where is defined.

  Hold the ALT key and the V key - Bar Menu DISPLAY - toolbars-.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">