Command buttons Tecra M7 - how to change settings?

Similar Questions

• using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  using Notepad, when I open My Notepad program to look at a text doc, all I get is lines of code. How to change settings?

  Hi Josephhenry,
  the notebook is only for the most basic of .txt files. All the more complicated files will be displayed incorrectly, you will see only the forms. Try to open it in wordpad.
  Hope this helps
  Eddie

• Tecra A10 - how to change the RAM?

  Hello

  I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

  The RAM slots are located at the rear of the Machine or below the keyboard?

  Any help will be appreciated.

  Thank you.

  Hello

  Memory module compartment is placed at the bottom of the unit.
  You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

  AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

  Welcome them

• Tecra S2: How to change the card Nvidia Geforce Go 6600 64 MB to 128 MB

  Can anyone here help me how to change toshiba tecra S2 vga nvidia geforce go 6600 64 MB to 128 MB?

  Please help me, it's important to me.

  Best regards

  Thank you... for everyone

  Well, what to say.
  A GPU upgrade is usually undesirable because no one can tell if the laptop would be stable after this replacement. So generally I would not recommend doing these upgrades.

• Tecra A9 - how to change the DVD?

  Can someone help with instructions how to change DVD for Tecra A9 model PTS52A please. Thank you

  Hi t.,

  As far as I know the laptop is fixed with a screw on the lower side that you can remove. But I think we should remove the keyboard as well to remove what the CD/DVD drive. So if you are not familiar with the disassembly of the laptop, you will have to help a technician for laptop.

  Otherwise, you can search with Google to find Web sites, they show how to disassemble the laptop. ;)

• After you click the command button, the user can not change form

  This form with a command button to the Page 5 that duplicates the page: http://pardons.delaware.gov/pdfs/pard_app.pdf

  If the user running this command button and then closes and opens again the form, the user is more able to add or change anything whatsoever in the form. Instead, the user gets an error message that says "this document enabled extended in Adobe Acrobat Reader DC. features." The document has been changed since its creation and use of the extended functionality is no longer available.  Please contact the author for the original version of this document. "Is there a way to fix this?  Thank you.

  FYI, the JavaScript code for the command button is the following:

  var fld;

  var arrayFields = new Array (this.numFields);

  (IT) {/ / default is 'this'}

  for (var k = numFields; k; k-) {}

  for (var k = 0; k < numFields; k ++) {}

  FLD = getField (getNthFieldName (k));

  If (fld.name == "txtCrimSumOff_Cnt") {}

  If (fld.value == 1) {}

  FLD. Value = This.PageNum + 1;

  } else {}

  FLD. Value = FLD. Value+ 1;

  }

  var page_start = fld.value;

  }

  }

  }

  Spawn of named model

  var t = this.templates

  strName = "CrimSumOff"; var

  for (var i = 0; i < Extremity; i ++) {}

  {if (t [i]. {(Name.IndexOf (strName)! =-1)}

  myPage var = t [i] .spawn (page_start, true, false); together second opt to false to keep the names of files

  Get the name prefix field that Acrobat will automatically add the new fields

  var f_prefix = 'P' + (page_start) + '.' strName + '1';

  Reset the newly created fields

  this.resetForm ([f_prefix]);

  Go to the new page

  this.pageNum = page_start;

  }

  }

  Yes. If you don't have the original version, unchecked, you can open the version activated in Acrobat and select: file > save a copy

  This will create an incompatible version. Note that it will automatically open in Acrobat when you do this.

• Tecra S1: How to change some keyboard keys?

  Hello!
  I need to fix a Toshiba Tecra S1. To the old keyboard the 'Windows' key has been broken. We bought a new keyboard but the problem is, that the layout of the keyboard is English, but we need to German. So I have to change some of the buttons of the keyboard here.
  Is there something how it goes easily? My first try isn't good, I can't hang up button in the keyboard support.

  Can someone give me some advice?

  Thank you!

  Post edited by: Pider2k

  Hello

  You can replace only the key caps but not all buttons!
  If you need another keyboard configuration I recommend contact the dealer again and replace the keyboard.
  I put t see problems why not replace!

• How to change settings is disconnected so that other applications are not automatically closed?

  original title: log settings (windows 7 Home Premium)

  For Windows 7 Home Premium, how can we change the log settings so that other applications are not automatically closed with log off?

  I'm trying to keep Microsoft Word and files that I have worked on before closing logon.

  [Moved from the Word forum; please move again, if this isn't the right subforum]

  At best, I think all you can do is Pin password to your taskbar,

  Enable recent items, jump lists

  Right click your Start button and select Properties,

  Check the two boxes of privacy,

  Then at least you will have this item / items on the jump list, you can open it immediately when you log back in.

  

  You will still need to manually, save your work or value Word Auto save every minute / 60 seconds...

  But when your disconnect there is no way to have a program remain open.

• HP6500a more (e710) how to change settings on the printer itself to scanning? Or the new shortened scan do?

  I want to scan a document with 600 dpi to the pdf - A format and send it to the computer. It is not a shortcut with this option in the printer menu. How can I change the settings of the printer itself?

  I know it's possible to select this option in the HP on the PC Solution Center, but then I have to walk between PC and printer for each new document. The changes I made in the solutioncenter do not affect the scansettings on the related printer.

  I have read that it was possible to ad or change shortcuts on the old version of this printer (HP6500).

  Pieter

  I've found a workaround. When you change the settings of the daily analysis in the HP Solution Center and start parsing a time from the PC, these parameters are passed to the printer.

  The following analysis started with the icon daily analysis on the touch screen of the printer is then performed with the new settings.

  Pieter

• Tecra A11 - how to change the sensitivity of the touchpad?

  Our company has recently bought some Tecra A-11 to replace some of the old Pros of Satellite. We have noticed that there is a tendency for the mouse cursor jump from one place to another on the screen while typing causing major issues when coding and writing emails. Sometimes you just type in a place and not notice while other times it will select and remove chunks of text without noticing your.

  We can lower the sensitivity or what options do we eliminate this problem.

  Hi CGAdjensen,

  Yes, you can change the sensitivity of the touchpad, that s no problem. Also, I did this because the default is too sensitive for me.

  So go to control panel > hardware & sound > mouse > advanced > advanced feature

  Check this box!

• BlackBerry smartphone how to change settings of the calendar from 06:00 - 21:00 09:00-17:00 display?

  I have a Blackberry Curve and use Outlook 2007 with Exchange Server. Everything works well and syncs BUT my Blackberry calendar display only shows an appointment from 09:00 - 17:00.  I am PDT but working with people EDT so frequently appts at 07:00 - 08:00. I also have appts tonight I want to discover.

  The appts appear correctly on my computer in Outlook and the 9-5 ones are displayed correctly. I'm sure it's something obvious, but I could not find a setting on the Blackberry or Outlook. The Outlook files are pushed downwards by a 3rd party Exchange Server provider.

  Thanks for any advice.

  Since NOT a 9 - 5er

  Thanks for the tips.  Worked like a charm.

  Now I'm 24 x 7

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• How to change the color of Satellite Pro P300 settings

  I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
  My old desk there was a button on the monitor.

  In a first time laptop user im nuts will try to find how to change my monitor settings...

  If anyone can help id be so grateful

  Please don t mix the portable computers internal monitor with external PC monitor.
  You won't find any control unit and on the external monitor that would help you to change the color.

  I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
  The parameters are; color, gamma, brightness and contrast

  Here, you can set values between 0 and 100

  Maybe it's what you're looking for

• Satellite A200 - 23 X: how to change the app assigned to buttons on the touchpad

  Dear friends,
  I have the Toshiba A200 23 X with Vista.
  I installed the Synaptics pointing for the touchpad device. I assigned in the 3 buttons, 3 different possibilities for that when I touch each of these buttons to start the appropriate application.

  The question is how to change the applications that I assigned?

  The first time, before fix, when I touch for example, the first button, a small window appears asking to attach a request, the same happened with the rest buttons 2.
  But now I want to change these apps that I have attached to these buttons, I know no way th.

  If anyone can help please.

  Thank you very much

  Hello

  I think you can change the settings of touchpad button in the properties of the touchpad.
  You can find properties of * Panel-> mouse-> device (last tab)-> settings button settings *.

  There are a few options. You must choose the option called Dual mode
  You will find the area where new applications could be affected.

  Concerning

• How to change color of control press the button

  How can I change a color of command button when it is pressed and held?

  I want to know to momentarily turn green while being pressed.

  Thank you.

  The EVENT_LEFT_CLICK_UP got the desired effect. The toggle button now displays the color 'On' until the button is released.

  Thank you all.