open session visa
What is the best practice?
Start the program
-open session visa
-do stuff
-Close session visa
end program
OR
Start the program
-REPEAT
-do stuff
-open session visa
-do stuff
-Close session visa
-do stuff
-REPEAT END
end program
And don't forget that you don't have to do either. With NI-VISA, opening is optional for quite a few years. A session will be automatically created when you use any VISA. You can also set it to this VISA is automatically closed. It is definable tools > Option > environment.
That being said, it open and close are probably a compatibility issue. I don't know if the implementation of another company of the VISA works the same.
Tags: NI Software
Similar Questions
-
Cannot open session VISA Hameg HM8112-3
Hello
I have a Hameg multimeter connected to my computer via GPIB. Windows can detect the port and says it's working properly. However when I open OR MAX it detects the port but are unable to communicate with the instrument. He says that he was not able to successfully open a VISA session to the device. When I click on "VISA Open Test Panel", it gives the following error:
Error opening resource:
ASRL10::INSTRVISA: (Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system.
I downloaded the drivers for the Hameg but I guess I'm missing something. Anyone encountered this before with a GPIB connection?
Thanks for your time.
April
-
The system cannot open session now because the domain is not available
Hello
I met the problem of windows cannot open a session after I installed the MicrosoftFixit50588.msi.
I need to turn on the CredSSP and download & run the site MicrosoftFixit50588.msi Web [url] http://support.microsoft.com/kb/951608/en-us [url]
He asks to restart the PC after the installation is complete. After that I restart my pc and I could not log on to windows and get the error message "the system cannot open session now because the domain
is not available. the user's machine: Winsows XP Pro SP3
Anyone know how to fix this? I urgent need, thank you.
Kind regards
GraceHi Grace,
1. is the computer connected to a domain?
2. are you able to boot into office?
I suggest you follow the link below and check them with the question:
The system cannot open session now because the domain
is not available: http://support.Microsoft.com/kb/824302
I hope this helps.
-
I want to know how long newspapers located in the shared folder in computer management > section open Sessions are kept during for XP and Windows 2000 Server.
I guess it's on the order of 4 to 8 hours, but I need a firm answer.
Hello
Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
TechNet Forums - http://social.technet.microsoft.com/Forums/en-AU/winservergen/threads
-
the system cannot open session now because the domain d57jz6d1is is not available
IM computer work for someone elis I get this error (the system cannot open session now because the domain d57jz6d1is is not available) when trying to open a session even in safe mode has the computer versions xp with sp2 on it it is a mistake to real windows or if someone know a work around for help would be appreciated.
The cached credentials are limited or their expiration, you must connect to the domain to log on or you need to log on with a local account.
John
-
problem opening session: the user profile service failed to connect
original title: problem opening session
I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix
This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.
Is that what your error message: unable to load the user profile and the user profile service has not the opening of session
If so, please read on...
You have another admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a system restore first, if not help, run it
Microsoft support tutorial below.2. If you cannot connect to your own account, you see another
next to your admin account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a
Date of when you were able to log in NORMAL MODE as your restore point.
How to restore the system:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" application -
How to find the source IP address of open session with VC
I gave only a single journal id for all users in my virtual environment. They all use the same ID for their own use. My question is how do I know the source IP address of the active\idle open session with VC?
VC Server - version 4.0 - 208111
vSphere Client - 4.0 build-208111
Servers ESX - 3.5 build-238493Thank you
Ganesh
Take a look at the thread below, it might be useful
-
Hi all
is it possible to know that a user how many sessions are opend in different computers or user closes the session without disconnecting?
If its Yes and then guide me and thanks in advance.
SarahSarah,
You get the number of open session of a specific user of the V$ SESSION viewas said by Arun.
SELECT COUNT(*) FROM V$SESSION WHERE USERNAME = '
' And if you want to close the session, use the command below. The SID, SERIAL # get the view V$ SESSION .
ALTER SYSTEM KILL SESSION 'sid>,
' Kind regards
Manu.
-
VISA's TCP/IP cannot open session
Hi all!
I'm trying to fact communication between two computers via the TCP/IP protocol. I create new resource of VISA's TCP/IP, choose manual entry of Raw Socket, enter the IP address and Port number and have the following error:
What is the solution to this problem?
Mark_Yedinak wrote:
Dennis_Knutson wrote:
Why not just use the normal functions of TCP/IP? I'm not even sure that you can talk to a non-VXI-11 device with VISA. You have many examples of TCP/IP, choose a.
VISA TCP will work with any generic TCP device.
In addition, to the OP, your name of the resource is incorrect. It should be TCPIP:
: :OCKET. Very well. I've never used the SOCKET type.
-
I have a VISA session (for example a session series on COM1)
How can I programmatically determine if the session is open?
(I see on the screen as an icon appears when a session is opened. What is the representation of this?)
-I want to be able to open a Session, if it is not already open, or use the existing session if it is (no duplicates).
... by the way this table in a comparison to the inside of a loop with a conditional stop and the output Boolean value gives me exactly what I want without opening a new session of VISA! Genius.
Thanks Dominic
-
Unable to open session or connection of YouTube or Google sites
Firefox 19.0.2 is suddenly unable to provide a platform for the connection, or the connection to Google sites. This occurred in a working session.
What I get on YouTube is a red banner
! There was a problem while connecting you on YouTubeOn other sites, it just keeps asking for a password or just default is visitor.
I say that it is Firefox because changing browser doesn't have these problems.
I started Firefox in safe mode and nothing changes to avoid any rejection due to adblock or ghostery.
I did NOT reset as I'm afraid of losing something.
The other answers and suggestions I found on this topic will not apply to my situation, I can say.I would appreciate the pointers that I can use to better identify the problem.
You can try to remove the passwords of the site that are currently stored in password manager:
- Tools > Options > Security: passwords: "saved passwords" > "show passwords".
You can delete all stored data with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.
With the help of "Forget this Site" will delete everything as bookmarks, cookies, passwords, cache, history, and exceptions in this area, so be careful and if you have a password or other data from that domain that you do not want to lose so take note of these passwords and bookmarks.
You can't recover from which "forget" unless you have a backup of the affected files.It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.
You can also try opening a new private window (File menu or Firefox) to see if it works.
-
3.6 each time I closed the browser with multi tabs open that he would give me the possibility to save and exit. Then when I opened it the browser it would give me the possibility to open the previous session. I could also put bookmark all open tabs. All of these features seem to no longer be present in 4.0. If that's the case I'll be forced to uninstall and reinstall 3.6.
The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".
If you need to access the menus, you can press Alt or F10 to display temporarily.
See my first answer concerning access to the bookmark all tabs
-
1073807343 error occurred during the opening of Visa
I have a vi that:
-Locate the USB port that RS485 communication device is connected
-sends a command to each sensor
-reads a response from each sensor
-performs a calculation on the answer
-saves the response to a file of measure
I used a flat sequence to query each sensor. When the vi is started, it throws error 1073807343 indicating "insufficient location information or the device or resource is not present in the system." When I cancel the error, the vi works well with no other errors. This error started to appear when I upgraded to LabView2015. I also use the LabView Base development on a computer laptop Dell D630, WinXP SP3 version.
I'm taking a guess here, but I think that the error is in the opening a new piece of reference Visa of the code block.
Does anyone know why this error is thrown, or how to fix my vi?
-
"failed to open session" on Photosmart all-in-one (C309a)
I had a series of problems with Photosmart C309a my mother. The scanner on the screen was not functional (need to go to the scan on computer software to print). Not a big deal, but I want the device works as it is designed.
I have the drivers updated and he gave another chance. No luck.
Then I reset the print on his iMac (10.6.8) system and not only it will not scan the device, but now it will not scan from the computer. Errors appear on 'HP imaging device control' and 'cannot open the session on the device.
She prefers to not update the operating system, unless it is absolutely necessary.
Any other suggestions on how to restore the scan of the computer and the device?
Hello there! Welcome to the forums @cleardaypdx
I read your post on disorders of scanning you are confronted to with your Photosmart C309a moms and I wanted to share with you my suggestion.
Click here to see the guide and follow the steps: "another program has control of the scanner" Message appears on the computer when scanning
I hope that helps, a great day!
-
5 report on Windows 7, open Session connection prompt
I have an existing application that uses Crystal reports 5 (I know it's old). I installed it a couple of times on Windows 7 without any problem. The last two sites are different: CRW installs and runs, but when I try to print a report Windows pushes me with an open 'Microsoft Access Session' dialog box with username "Admin" and password box. Cannot go beyond this no matter what I do. I've installed exactly the same way each time, checked the presence and versions of all the files .dll and other evidence, but can find no difference between facilities that work and those that are not. Help, please...
ST
I realized that 5 is much older than 10 and still once, we would have no knowledge of the interaction between CR with anything (like and update) in the operating system. Your best bet is the developer.
Maybe you are looking for
-
Yosemite 10.10.5 sleep bug?
I got a reproducible bug pop up for several weeks I saw a few months ago. If my Mac Pro mid-2012 falls asleep on his own under energy-saving, or I put on standby for a period of extranded, it will go to the black. But when I try to wake him up to the
-
Where is the "Home" tab on the top of the brwoser?
I am running windows XP on your desktop and have updated to the latest version of Firefox. However, I can't find the tab "Home" single on top of the toolbar which can quickly take me to my home page.
-
Satellite P100-221 NVIDIA GeForce Go 7900 TV-Out problem
Hi, I have Toshiba Satellite P100-221, with NVIDIA GeForce Go 7900 GS, it has a tv (S-video) output, I had cable & connected & nothing appears on television, & when I go to advanced settings & see the video card options, I found that nothing related
-
should this progam I use to run my rocket
should this progam I use to run my rocket help pliz
-
Interruption of the connection with the WIRELESS network and network LAN adapters
After a virus attack that I got from a USB key, I lost contact with the WLAN and LAN network cards. Manage to clean your computer of viruses, but cannot access the network LAN and WLAN cards. They do not appear in Device Manager. Tried restoring the