should this progam I use to run my rocket

Similar Questions

• Should this preset I use to take a DVD video or a video on my PC to import into a PE10 project

  I'm trying to take the video to a standard def DVD I've already done and put it in another project first elements 10.

  So far, I tried to import the video on the DVD using the hard drive, Flash memory, camera preset (Standard 48 kHz) and import the DVD player.  Imports video, but when I put the clip in the timeline, it is horrible and does not display.  It is in an area within the screen.

  I read in a book Muvipix that's how can I import all the video from a PC drive.  Is there something else that needs to be done?

  The same thing is happening on videos filled that I created and saved in the Video folder in my PC.  When I try to put them in another project of first 10 Elements, the resolution is terrible.  I'm not sure which preset to use.

  Help, please.

  There are two elements here, but it seems to have taken both.

  First, there is the project settings, which should be NTSC (for NTSC-land, or PAL PAL-land), DV or Standard 4:3, widescreen 16:9, according to the DVD-video, you use as source.

  Then there is how get you the media, and since you do this VOB, it will be the camera disk hard-setting it. This will import the MPEG-2 files, wrapped in the VOB container, with the exact order of the fields.

  Don't know why pre is complaining about this project, unless you choose Standard and widescreen, or vice versa.

  Now, you do not really capture, because it is a SD to HDV miniDV cassette, also a bunch of nimiDV, but only one in HD.

  What you do is import the MPEG-2 files. It is the same if we had HD as AVCHD, originally filmed in an SD card or other card Flash Media.

  Good luck

  Hunt

• Which user account you want to use to run this program?

  That fairly recently, when I click to start Firefox, and just before it actually opens, I has the following screen:

  "Which user account do you want to use to run this program?

  I did some internet research and it seems as if many people have encountered this same problem.

  What is the cause, is it dangerous for my computer, and how can I get rid of this message?

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Which account you want to use to run this program?

  A week ago, just after installation of Microsoft Update, when I start my computer, a box came who said: run as.  Which account you want to use to run this program? [x] current [of user\Owner] protect my computer and data from unauthorized program activity. This option can prevent computer viruses from harming your computer or personal data, BUT selecting it might cause the program to function properly. Current use is already checked, and my options are to check I want is not protected, or cancel. I tried all the options, or just close the box. What is the devil? Why should I see it every time I start my computer? And, more importantly, why would I want to when, "selecting risk the program work correctly?" How can I get rid of this annoying box, since I already have Kaspersky as a guard dog? Thanks, Tess

  No, you are not condemned.

  To make the warning "diagnostic mode" Begone, re - run msconfig and select the radio to "Normal startup" button (cela re - automatically checks the Java update box, as well as all the other boxes you might get UN-ticked).

  The way you described your original message is a bit confusing.  Messages request 'which account you want to use' - what are the choices presented to you?

  Run as.  Which account you want to use to run this program? [x] current [of user\Owner]

  Is the account that you sign normally called "owner"?

  You have an x in the box in front of "Current user" - If the current user IS 'Owner' what does the other box reference?  It may be a better representation of the pop - up:

  Run as
  Which account you want to use to run this program?
  [] Current user / owner
  [] Protect my computer and data from unauthorized program activity. This option can prevent computer
  viruses from harming your computer or personal data, BUT selecting it can cause the program to
  work correctly.

  That is, we really give you a choice of the accounts, but only the current account or anything.

  When you go to control panel > user accounts, is the account that you are connected to a "Computer administrator" or "limited account"?

  You need to do some detective work more:

  • In the Startup tab, run msconfig and uncheck ALL items.  If the "RunAs" message does not come to the top, you know that one of these elements is the culprit.  Selectively, double-check items (you can do as a group to save time re-boot) and re-start until you determine what startup item causes the error.  Once you have identified the startup item that is causing the problem, post back with his name and I will try to help you determine what to do about it.
  • The "RunAs" message continues even with all uncontrolled startup items, you going to dig deeper.  Reset things to normal by selecting the option "Normal startup" button and follow the steps.  I'll look at other things that start when Windows starts and see if I can suggest the next steps.
  1. Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx --> here
  2. Extract the files (right click on the zip file downloaded file and choose "extract all")
  3. Run Autoruns by double clicking on autoruns.exe (not autorunsC.exe).
  4. When the scan is complete, click file > save and save AutoRuns.arn in a place where you can find it later
  5. Download AutoRuns.arn on your SkyDrive (go to https://skydrive.live.com/ and log in with the same name of user and password that allows you to connect to ask questions here)
  6. Right click on the file downloaded and select 'Sharing' then 'Get link' and 'display only '.  Copy the link and post it in your next reply here.  See http://windows.microsoft.com/en-us/skydrive/share-file-folder

• You can run this program while using another anti-virus program

   
   
  You can run this program while using another antivirus program?
  I know that it is a matter of end now that MS does not have anyone else.
  However, I was going to dnld MS antivirus with Norton market too.
  I couldn't find info on one might or might not run another
  antivirus program during execution of the Member States. (as a general rule, you can't)

  Still, it would be interesting to know about this issue. And... Should be
  have been on one of the pages, so "requirements" or FAQ
  for example.
  Thank you in advance, Ric.

  Hello Ric Buckmiller,

  Thank you for using the Microsoft Windows Vista Forums.

  What specific Windows Vista virus protection software are you talking about?  Windows Vista will be usually comes with Windows Defender.  Windows Defender is software that helps protect your computer against the pop-ups, slow performance and threats caused by the software security spyware and other unwanted software to detect and remove spyware on your computer. Windows Defender Protection features in real time, a monitoring system that recommends actions against spyware when it's detected, minimizes interruptions, and helps you to remain productive.  Yes you can use it with antivirus software.

  Currently, Microsoft has an antivirus software on beta.  http://www.Microsoft.com/security_essentials/support.aspx
  If you have this downloaded, it advised that you can always use another software antivirus at this time.

  Or you are referring to Windows LiveOneCare?  Please let us know status.  Thank you!

  How to uninstall any other antivirus or firewall program?

  Before installing Windows Live OneCare, please make sure that you uninstall completely any existing antivirus or firewall program that may be on your computer.

  This step is very important, no matter what protection software you use, because installing one antivirus or firewall program over another on the same computer could potentially lock up the computer.

  Note: If you do want to keep the ability to reinstall your old antivirus or a firewall program in the future, make sure you have the original product CD (or a backup program disk) before you begin uninstalling.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• When you try to download full tilt poker, I get an error message saying that the qtwebkit4.dll lack export user 32.dllgetlastinputinfo. This is a used computer, I bought and I don't know if it's a setting that they have on it or not.

  I get an error message when the full tilt poker download which says that the qtwebkit4.dll file is linked to the file missing getlastinputinfo user32.dll export

  Hi Sandymon,

  Welcome to the Microsoft Answers site!

  Do you get this error only when you try to download only this particular game or something else?

  From now on, I would say lets you do a [SFC] System File Checker scan on the computer. He will try to repair the system files missing or infected.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all files must be replaced, SFC will replace them. You may be asked to insert your DVD of Windows Vista/Windows 7 for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, please visit the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to choose a program to open my photos when inserting my SD card? as it doesn't give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  How to choose a program to open my photos when inserting my SD card because it does not give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  I know what it is, and I'm trying to answer it... will keep you posted
  your original question in a forum of Vista.

  OK... you are running XP and your computer has a media player you
  Insert the card in?

  If you go to... Start / my computer... There should be one or more readers
  listed as... Removable Disk... These are the slots of the media player.

  If you right click on the removable disk representative the memory card
  and in the menu... Choose... Properties / Autoplay tab and open the fall
  window and select pictures. And... ICT... "ask me each time to choose
  an action "." Maybe this will restore the AutoPlay window when you insert
  the map.

  You could also try... on the left by clicking on the button "Restore default settings" / apply / OK.

  And it may be worth trying to run the AutoPlay Repair Wizard.

  Download the Microsoft Autoplay Repair Wizard:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• (Windows cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software.)

  That is the message in the WINDOW of WIRELESS CONNECTION. I was using internet last night when I turned off computer. Booted up today and the message above is all I get. No internet. Where should I go from here? I tried to fix IT.

  Hi cjh44,

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  Use Windows to configure wireless settings
  Step 1: Go to the start menu and select run
  Step 2: Type ncpa.cpl, and then click OK to open the menu of the network connections
  Step 3: Select your wireless service and choose the option change settings of this connection.
  Step 4: Go to the wireless networks tab and check use Windows to configure my wireless network

  Launch Windows Zero Configuration
  Step 5: go back to the start menu and select run
  Step 6: Type % SystemRoot%\system32\services.msc/s, and then click OK
  Step 7: Double-click the Wireless Auto Configuration option
  Step 8: Then go to the startup type list and click Automatic. Click on apply to confirm the changes
  Step 9: That's why click Start in the Service status section and then click OK to apply the changes.

  Hope this information is useful.
  Karena R - Microsoft Support
  --------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Office 2003 on PC Windows 7 used to run XP

  A computer used to run XP has Windows 7 installed for some time. He also had Office 2003 is installed for some time. It just started coming up with a message, "Microsoft Security Essentials requires your attention.  Support for this operating system ends"

  This means operating system or should it make reference to the office?

  Someone else did the 'upgrade', so I don't know how they did it.

  Someone suggested that looks like Security Essentials is to find traces of Win XP.

  Is the a file named C:\Windows.old (you have to enable Show hidden files and folders in Windows Explorer) to see this. There you have Windows.old contains the remains of Windows XP and should be deleted.

  =============================================================

  How to use the disk cleanup feature to delete the Windows.old folder
  (Should work with Windows 7)
  http://support.Microsoft.com/kb/930527/en=us

  Also: http://www.kodyaz.com/articles/delete-windows-old-removal.aspx

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder
  http://support.Microsoft.com/kb/971760

  How to remove the Windows.old folder that is generated when you perform a custom Windows installation
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  Also if none of the above works, try the following: (credit: Cyclone-Charlie)

  You can try to delete it in 'safe' mode and see if it works. He could do just for you.

  Click Start and in the search box type 'cmd', right-click on it and choose "Run as Administrator".

  You now have the command window open.

  In the command window type: del /S /Q /F C:\windows.old (press enter)

  Then in the command window type: rmdir /S /Q C:\windows.old

  J W Stuart: http://www.pagestart.com

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Should what format I use for my external hard drive?

  I have an external drive that I wish I could use (writing) from my Mac and my PC, but without the limitations of + 4 GB files.

  Is this possible or am I pasted with limiting the size? If so should what format I use on my external hard drive? and it has all the other notes aside I should know?

  Thank you!

  Hi Filabaca:

  If you want to use a hard drive external Mac and PC options are:

  1. format the drive in Mac as exFat

  2. format the drive to NTFS on a Windows PC and use a program like Paragon NTFS for Mac. https://www.Paragon-Software.com/home/NTFS-Mac/

  Paragon NTFS for Mac allows you to use a disc formatted in NTFS by a Windows PC.

  Here is an article showing the difference between FAT32, exFAT and NTFS. http://www.howtogeek.com/235596/whats-the-difference-between-fat32-exfat-and-ntf s /

  Kim

• Computer crashes when you use the RunAs service.

  The computer stops responding completely after using the RunAs service. Microsoft Word hangs intermittently so. I checked for bad RAM and malware. I think an OS reinstall will fix this problem. It is Windows XP SP3. It's a Dell.

  Hello AMD_64,.

  Have you had recent virus infections?
  If so and they were correctly deleted, on-site upgrade or reinstallation of the operating system may be your best option:
  http://support.Microsoft.com/kb/978788

• Should what program I use to upload a gedcom file?

  I run XP and I'm trying to download a gedcom file.   On the research, there are so many solutions, but most of them ask you to download a solution which I am reluctant to do as I have good security and anti virus program.   Can anyone recommend this program I use to download gedcom files.

  original title: gedcom on XP

  http://genealogy.about.com/od/family_tree_software/a/genealogy-GEDCOM.htm

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.