Open the file Raw (dng) in fast mode (items 14 Mac)

Similar Questions

• I have Photoshop elements 12, I just bought the new Canon 5 d with 50mp a Photoshop cannot open the Raw file what should I do for PS 12 can open the file Raw 50mp

  I have photoshop elements 12 and I just buy Canon 5 d with 50 MP and Photoshop cannot open the 50mp RAw file I get an error message, I can fix PES 12 so it can open the big Raw files

  You need a version of Camera Raw of 9.0 or higher and Photoshop elements 12 will not manage that. You need to get the free DNG Converter, convert your DNG files, before you can open the items.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• 10 elements will not open the file RAW of Nikon D7100

  I upgraded my camera to a Nikon D7100, PES 10 will not open the raw file. Y at - it a upgrade for PES 10, I've updated as much as I can. I think it is 6.4. Help

  The D7100 requires at least Camera Raw 7.4. This version is not compatible with Photoshop Elements 10. You must either upgrade your Photoshop Elements (the current version is 14) or use the DNG Converter (free from Adobe) to make copies DNG that you can use in 10 items.

• Cannot open the file RAW CR2 for canon 5 d mark III

  Cs6 installed which seemed to work fine until I tried to open a file of a canon 5 d Mark III CR2, does not open, checked the FIRST updates, nothing.

  Hello, you will need to install the camera Raw 7.1 RC available in Labs: http://labs.adobe.com/technologies/cameraraw7-1/

• I can't open the camera raw with canon sx60hs in items 12

  Anyone else had this problem

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  The SX60HS was first supported by camera 8.7 gross which is only compatible with 13 elements (and later versions).

  You must upgrade to 13 items or download the free Adobe DNG converter, convert all SX60HS Raw files to DNG and then change the DNG in 12 items

  Using Photoshop | Digital Negative (DNG)

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a subventio

  I just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a notification to come as States "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of camera raw.

  I'm entered in Photoshop and loaded the dates above, but have met 3 mistakes when you do this (1) Adobe Bridge CS5 4.0.5 (2) Adobe extension Manager SC5 5.0 update (3) 12.0.4 for Photoshop CS5 Photoshop

  I tried for 2 days now to try to get the operating system for your support/help will be most appreciated.

  My old camar is an EOS20 D and I have no problem with CR2 files it produce

  Hi rodaks, george

  Images II 7 d would be directly supported in Photoshop CS5 as requiring a new camera raw.

  So, you must download the free DNG Converter to convert these images to DNG and then open the DNG converted in Photoshop.

  See this link for download DNG Converter 9.0:

  For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.0: thanks

  For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0: thanks

• I have photoshop CS5 extended... it won't open the files in my nikon d750 RAW format...

  I have photoshop CS5 extended... it won't open the files in my nikon d750 RAW format...

  You need Camera Raw 8.7 or higher for the camera, so you have to CS6 or higher. You can use the free DNG Converter for CS5.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh

• By pressing 'o' in review mini bridge mode is not opening the file in Photoshop

  New user of Photoshop here and going through the basics.

  When you use the view Mode in mini bridge I can scroll the images using the right/left arrows open the head image in Camera Raw using the 'R' key, and pressing on the 'o' key does not open the file in Photoshop, I knew that it was supposed to. Am I missing something obvious?  By pressing the 'o' key doesn't do anything.

  With the help of Photoshop CS6.

  Thanks for the tips!

  -Daniel

  Gene,

  Unfortunately, this did not turn.

  I have exactly the same problem on two systems, two Windows 7 based charge installs CS6 and Lightroom 4.

  Spent a good support of 45 minutes on the phone with Adobe and they are scratching their heads as well.  Now it seems that the revision in mini bridge would be a great way to open the files that you want to use, but in reality it does not work.  The tech that I do business with Adobe is to have exactly the same problem as well.

  Not quite ready for prime time...

  D

• I can't open the net files downloaded from the d800.  I know I need at least camera raw 7.1 to open the files, I downloaded camera raw 9.2 but still no luck.  PS plug-camera raw still shows 7.0.  I don't know how to change plug.

  I can't open the nef files downloaded from the d800.  I know I need at least camera raw 7.1, I downloaded camera raw 9.2 but was not yet able to open the files.  When I go to Ps, click plug-ins, and click camera raw yet, it shows me that I have the camera raw 7.0.  How to upgrade this plug in.

  Hi rosalbaf

  What version of Photoshop are you?

  Camera raw 9.2 will only work with Photoshop CC and more.

  

  Update your Photoshop help > update

  See that camera raw required devices supported by Camera Raw , Camera raw, Photoshop

  Concerning

  ~ Assani

• I have a canon 70 d and just bought 12 elements. It will not open a file raw for me. I've been advised to download the latest version of camera raw, I did, and he always says that my camera is not supported. I really need to open my raw files. Peut

  I have a canon 70 d and just bought 12 elements. It will not open a file raw for me. I've been advised to download the latest version of camera raw, I did, and he always says that my camera is not supported. I really need to open my raw files. Can someone help me.

  Which version of the Camera Raw plugin do you have now?  Use the help / about Plug-ins / Camera Raw in the PSE to see Editor.

  Also this operating system you have, XP, Vista, or something more recent?

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• Trying to open the files Windows 3.1 with Vista Home Premium 32 bit

  I am trying to open the files of an old computer running Windows 3.1. the files include MS Publisher, MS Works, encyclopedia Compton, & several other w/3.1 compatible programs. Y at - it a program or an update to Vista that can be used to open these files? What I try to open it & save programs on a version of Windows 3.1 & Vista before using on Vista? I can't open files from MS Office that have been made on a computer running Windows 98 or 2000. Any ideas?

  Windows has many built-in features to make it as compatible as possible with older versions, but Windows 3.1 is really a little old! You can try to use Compatibility Mode, but it goes only up to what Windows 95.

  To run an older program in Ccompatability Mode (as if your PC was using an older operating system):

  1. right click on the program and select 'properties '.

  2. go in the 'Compatibility' tab at the top.

  3. check the first check box and to set up the 'Windows 95 operating system "(which is as old as that).

  4. check all other settings for maximum compatibility (depending on the program that you try to use, some may not be necessary, but you should try each of them to be sure).

  5. click "OK" and try to run the program.

  Note: If you want to try to do this at a program Office (and other Windows programs), this may not work. Please ask for more help with this.

  Your files, you need to just find a compatible program to open with. Please tell us the types of files for more help with this.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.