Opening for a disaster?

Greetings. I'm new to the Cisco PIX firewall. I learn well. We have just received a 506th PIX that my boss wants to implement. I know it's default is closed to all incoming traffic. I was at the point where I felt that I opened the ports needed to run Exchange 2000 and a few other things that people need to do, however, my boss came to me there telling me to open all ports and then close them as attacks go up just 1 hour. I flounder it was a bad idea and whenever I made a good point and he had to think of a reason why we need to open the port he would use to, "do as I say." So now I'm looking a quick and easy way to just open all ports. I would then create the rules of refusal to close them. Can someone help me?

outside_access ip access list allow a whole

Access-group outside_access in interface outside

However, the ASA on the PIX algorithm still will check for violations sequence numbers, the malformed packets, etc... You will also need to configure your xlates to allow external clients to build & to inside hosts. One way to do it is:

access-list sheep ip allow a whole

NAT (inside) 0 access-list sheep

Good luck.

Scott

Tags: Cisco Security

Similar Questions

  • Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

    Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

    Hello monorayfromportland,

    If you are unable to connect to the iTunes Store on your Apple TV, take a look at the troubleshooting steps below:

    If you cannot connect to the iTunes Store

    If you cannot connect to the iTunes Store on your Apple TV (4th generation):

    1. Make sure that your date and time are correct. Go to settings > general > Date and time.
    2. Check if your Apple TV software is up-to-date. To check the updates, select settings > system > software updates > software update.
    3. Make sure you have an active network connection. Go to settings > network.
    4. Check to see if other devices, such as computers or tablets, can connect to Wi - Fi and access to the Internet.
    5. Reset the wireless router by turning and then again.

    Take care.

  • Mail (8,0) keeps smoking - will not be open for more than a minute or two. Help?

    Mail (8,0) stop smoking. Will not be open for more than a minute or two. This has happened for several days. Help?

    You have all the extensions Mail any installed?  Who is your email provider?

  • In the Pages, when I quand je selectionne selects open for a list of my files, all I get is an abbreviated list of a few files.  That's happened?

    In the Pages, when I quand je selectionne selects open for a list of my files, I get nothing more than a brief list files, more than other things.  What happened and how do I get my list?

    When you choose open, it will open the finder and you will find your way to all the files.

  • I can't change my ringtone (default) open for ringtones that I bought on the iTunes store. iOS 9.2. U CN understand? Thank you

    I can't change my ringtone (default) open for ringtones that I bought on the iTunes store. iOS 9.2. U CN understand? Thank you

    Hi go to settings - sounds - ringtones if the one, s you purchased are

    Not on the list, go to restoretones.apple.com

    See you soon

    Brian

  • Add in one file other than (s) opened for reading or wirte

    Hello

    I work in the lab will be using barcode readers to scan the hardware id for all of his test at the beginning of each test. A material is scanned several pieces of information about the equipment will be appeneded in a single file named because equipment is scanned. So over a period of time, we can look at the different files and see when they material was used (by a stamp) and where it has been used.

    So I need to be able to update a file that could be opened by others (be it in playback mode / writing). If anyone has any ideas/suggestions on how I can add to a file that somene has already opened for reading?

    Access, SQLServer, MySQL, Oracle and any other database can be used. I do not know to Oracle, but others are provided with MS Office, have a free version or free. Access is suitable for a small number of users. Others are more robust and suitable for businesses. OR sell the database connectivity Toolkit, but there are several free alternatives.

  • source code open for mechcommander gold game

    Victorinox original title: Microsoft salvation

    can Microsoft me source code open for mechcommander gold?

    Thank you
    www.mechcommanders,ShortURL.com
    Andy ;)

    Hello Andy Tozer,.

    The question you have posted is related to the MechCommander game and would be better suited in the support of Microsoft MechCommander game.

    I suggest you to consult the following link for more information.

    http://www.Microsoft.com/games/mechcommander2/default.aspx

  • I have a single open for Exchange 2007 Standard how license get the product key

    I have a single open for Exchange 2007 Standard how license get the product key

    For assistance, please contact the administrator of your Open License program.

  • Downloaded file to open for securitry reasons has failed

    Downloaded the file fails to open for securitry reasons?

    How to open?

    Hi Bernard,.

    In addition to questions asked ahaap, what browser you are using (name and version)?  Where is the downloaded file (in your folder on your desktop or downloaded files or where)?  What kind of file is it (the file type - 3 or 4 digits after the point in the name of the file)?  And, once more, please provide the FULL error message and EXACT Word for Word, including all codes.  What exactly did you download and what Web site (Please provide the URL, so I can check myself)?

    Try right-clicking on the file, and then click 'run as administrator' to see if that helps.   Even if logged in as an administrator, I have seen this work for some stubborn programs and that he know of cases where this is pretty much the only way to get the installation works.

    I hope this helps, or that the information you provide in response to our questions helps us to identify the cause of your problem so that we can better help you.

    Thanks and good luck!

  • When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

    When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

    I can only log in safe mode of network.

    original title: blue screen error

    If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

    "How to solve configuration errors by using the System Configuration utility in Windows XP"
      <>http://support.Microsoft.com/kb/310560 >

    "System Configuration Utility overview"
      <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

    HTH,
    JW

  • I can't get my attachments to open, for example to open an attacment real estate form to show me a picture of a habit of the House, what can I do? Thank you

    I can't my attachment to an e-mail to me to open, for example, real estate, of that I'm sent me some pictures of houses but I can't seem to open. What can I do? Thank you CG-942

    Save the attachment to the office and see if you can open it by clicking on it.  If not, then right-click on it and see what is the file extension and that help you find which program you may need to open it with.  If it is a pdf file, then you must have Acrobat Reader on www.adobe.com.  If not, ask your real estate agent what format the pictures are in?  If you can't see all the images in emails, then see www.oehelp.com/noimg.aspx

    Steve

  • Games will not be open for windows xp?

    Why the habit of the GAME window open for me? It is said that the shape of games is for windows 7, I have windows xp, how to find the right connection for windows xp?

    Hello

    ·         What are the games that you are trying to play on the system and what type, online games or installed games?

    ·         If it's an online game then, are what website you trying to play the game from?

    ·         What is the exact error that you are experiencing?

    ·         Have you been able to play the game before on the system without any problems?

    Please provide details so that we can help you in a better way.

    If you try to install and play the game that is not compatible with Windows XP so, I suggest you to check the below link.

    How to troubleshoot program compatibility issues in Windows XP

    http://support.Microsoft.com/kb/285909/en-us

  • My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

    After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

    Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
    That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

    Here are the formats supported by WLMM:
    Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

    If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
    The best format to convert is WMV. The most reliable and foo-proof format.

    PS, It might be better if you posted in the section photos and videos:
    http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I installed quick heal antivirus in my laptop, it flashes just opened for a short time and not close access.

    * Original title: Quick heal installed in windows

    I installed quick heal antivirus in my laptop and I installed the software manufacturer third, software flashing just opened for a short time and not close access. problem occurs on Win 7 and XP.

    (Moved to install, upgrade, and activate)

    Uninstall Quick Heal and see if the problem resolves.

    Try another Antivirus utility:

    The best Free Antivirus for 2015 | PCMag.com

  • How can I get the opening for an enlarged screen screen

    Original title: opening screen

    How can I get the opening for an enlarged screen screen

    If you are talking about an Internet Explorer page, three options.
     

    1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
      
     
    2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
     
     

     
     

Maybe you are looking for

  • Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

    Hello I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it,

  • opening of startup programs - change settings

    I tried to open a document and has been invited to select a program to open it in. I chose Picassa, but now all my startup strives to open in Picassa.  I just tried to open the doc even again and just as a test when you are prompted to select a progr

  • Flash goes off but the picture is dark

    Hello!  I'm sure that this issue should have been invited to the front, but he could not find in a quick search.  I have a T3i is around the age of 18 months. About a month ago, the flash started to do strange things. A photo would be nice, but the n

  • CD does not play in car

    Why the habit of the cd I burn from computor play in the car, it's like the system cannot read what is on the cd.

  • touch screen 15R150NR: port on which the USB 3?

    Is there information on this notebook model on the site of HP? I could not find any manual/photos/what either. Thank you