OpenScript (string) info - method, SEE display.

Similar Questions

• What is the difference between the following methods to display the...?

  What is the difference between the following methods to display the plan to explain it?
  PLAN of EXPLAIN for SQL statements
  package dbms.xplan
  
  Thank you

  You are mistaken in thinking that they are alternatives.

  EXPLAIN the PLAN meets the PLAN_TABLE.
  Only after that can you use either of
  SELECT... FROM PLAN_TABLE
  or
  SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY);

  Unless you are using DBMS_XPLAN. DISPLAY_CURSOR directly on a present cursor in the shared pool, the PLAN to EXPLAIN is still a sine qua non for DBMS_XPLAN. DISPLAY.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• A string that can be displayed as ASCII and hex in an indicator will allow not to store the data in a file in ASCII format

  You can see the data in an indicator very well, but when we try to write this string of hexadecimal data in a file, it will only save the data in ASCII format.

  This seems simple enough, as the indicator can be selected to display the data in different formats (VI > properties > appearance > display Style: Normal, backslash, hexadecimal).  However, I could not, for the moment save data in different formats.

  Altenbach says:

  ... or you can just read the string: text.text property to get everything that is actually displayed.

  Like this...

  

• How to convert the Ascii string containing hex to hex string info?

  Dear all,

  I am busy doing a control/reading program for pumps of ISCO.

  Right now I'm in trouble with to send orders for PUMPS in HEXADECIMAL. When I use a CONTROL to the STRING in HEX display, everything works fine (when I manually write down the command in the control of the chain).

  Exist it a couple of pieces order: string Destination, length, ordering, Checksum. I'm doing a sup - screw that automatically calculates the checksum (modulo 256) and adds it to the string. Everything is going well: first of all, I shared the ascii bytes command and I calculate the checksum and add as ASCII HEXADECIMAL value to the chain of command. Also a CR (= 0d) is added. Now the whole string must be converted to hex. The string contains the right nummers HEX, but they are in ASCII format. Here was I feel worth it, I don't know how to do it!

  So to summarize:

  I have an ascii string that contains the values HEX (for example 315230303652454D4F544531420D) and it must be converted to a HEX string (for instance 3152 3030 3652 454 4531 420 4F54) for the pump of the ISCO can understand the command.

  The VI is attached.

  Thank you in advance,

  Bio

  Bio,.

  This should do what you want.

• CAN string comparison to see if I have the right one.

  I am writing a program to test a product that we produce using CAN.  How would I go see if I have a CAN message string to know that our alarm is turned on, on the product?  Is there a way to compare channels incomming and pass it some Boolean value when it does?  Thank you, Fred

  Hi Fred420,

  You can use the simple comparison function to compare two strings. If you have a list of channels, then you can store them in a table and use the search function of table 1 d. Two find a portion of a string in another string, you can use the search and replace function.

  It will be useful.

  Mike

• Search for the string in the string table and see the following value in the line

  Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As:

  Table:

  a; b
  c; d
  f; g

  example: find the 'c '.

  VI shoud show "d".

  Concerning

  Not a bad homework problem.  Do it with pencil and paper.  Write your table and pretend you're the computer.  What you want to do (step by step)?  What questions do you have?

  Now that the translation a bit to computers.  You mentioned that the data is in an array of strings.  What structures (LabVIEW) work with tables?  [Do you know how to work with tables?  [Otherwise, review some of LabVIEW Tutorial material - see top right of the first page of the Forum].  What do you know about channels?  What questions you need to ask questions on the channels?  What do you know about string functions?

  Watch these things in some LabVIEW code, 'feed' some data and see what he does.  If it seems to do things "unexplained", you can try to look at the block diagram to run by turning the performance highlight (and if you don't know what that means, use the help of LabVIEW and see the tutorials).

  Bob Schor

• How can I see/display of the internal usb devices installed on the computer in my computer?

  I can't see the drive letters removable usb in my computer.  However, the removable usb drive letters are visible in disk management.  What can I do to display the letters of removable usb drive in my computer screen?

  Hello

  1. are you not able to see the readers or only the drive letters?

  2 corresponds to the letter displayed when the USB is connected

  I suggest that you try to rename the drive and check if it helps.

  I also suggest that you follow these steps and check if it works

  a. open the location of the computer and click organize.
  b. now, select folder and search options and click on the view tab in any drive
  c. now select the option "show readers, files and hidden folders. Click Ok

  I suggest that you send a screenshot of the screen that you refer to help you better.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  See the link below to find out how to post screenshots or other photos in the forum discussions.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.

• String.startsWith, method behaves like the method String.equals

  Hello
  
  I work through the assignment of the Java Servlets and JSP, and told me to use a simple iterator method and startsWith. This bit is not part of the assignment as they write it for you, but it does not work for me.
  
  Grateful for any help, I'm not cheat my assignment because it comes to Servlets and JSP, and I'm not marked on this part.
  
  Here is my results using System.out during an iteration through my loop.
  
  Green home starts with the Green House
  the Pink House does not start with the Green House
  the Blue House does not start with the Green House
  the Pink House is bigger that the Pink House does not start with the Green House
  the Green House is bigger that the Pink House does not start with the Green House
  the Green House is bigger that the Green House does not start with the Green House
  the Green House is bigger that the Red House does not start with the Green House
  the Blue House is bigger that the Pink House does not start with the Green House
  
  
  My table list is built like this: -.
  
  searchPrompts = new ArrayList < String > ();
  searchPrompts.add ("the Green House");
  searchPrompts.add ("the Blue House");
  searchPrompts.add ('pink house');
  etc.
  
  
  and my loop is less and does not compile if I throw the (String): -.
  
  int countMatches = 0;
  for (Iterator it = searchPrompts.iterator (); it.hasNext () & & countMatches < = 5 ;))
  {
  String aPrompt = (String) it.next ();
  If (searchString.StartsWith (aPrompt))
  {
  System.out.println (aPrompt + "begins by" + searchString);
  matchingPrompts.add (aPrompt);
  countMatches ++;
  }
  on the other
  {
  System.out.println (aPrompt + "does not begin by" + searchString);
  }
  }

  Your code says:

  If one starts with B, then print "B starts with a.

  Until your prints claims is put trial is not actually what is being tested.

• OpenScript do not provide Options displayed in the Doc

  There are several options that are documented to v9.0, but are not available in the application. I was able to work around most, but can't seem to get around it.
  
  Maximum JVM heap size (found at 2.4.1.3 system)
  
  I need this option that the script runs out of segment of memory allocated. Is not leaking, and the script works if I broke it upward, but it is a test of navigation E2E data-driven, so I prefer to keep it together. Here is the error that I get that leads me to believe that I need to increase my max heap:
  
  Error in the section not specified to the unknown line. ScriptException occurred. An unexpected exception has occurred in the script. Section of script: not specified.
  means: Java heap space
  
  Thank you.

  Hi John,.

  Version 9.0 open script, you can find the maximum size of the JVM heap in perspective Tester in "View - preferences Openscript.

  Expand the node of the tree "OpenScript" then click play on your right side, you will see three General, system and error handling options. Now expand your system and you can see a default text field "Maximum JVM heap size" assigned by the system is 256 MB, so you will find no value in this field. Make sure that you enter not more than 90% of total memory allocated.

  User of OATS thanks...

  Happy Scripting with open Script... Tool of the future for Oracle ERP products.

• Method of displaying Pl/Sql types

  Hello

  I would like to know how to print all attributes of type pl/sql.

  For example, I created the method of display_address below. I would like to know how to print all attributes rather than give one by one. In my project, we have over 1,000 attributes that are defined under the body. It is therefore difficult to print everything one by one.

  It would be very useful if someone help me on this.

  CREATE or REPLACE TYPE employee_typ AS BODY

  FUNCTION MEMBER card get_idno IS BACK

  BEGIN

  RETURN number;

  END;

  MEMBER display_address (SELF IN OUT NOCOPY employee_typ) PROCEDURE IS

  BEGIN

  DBMS_OUTPUT. Put_line(employee_id ||) ' '  || employee_id);

  DBMS_OUTPUT. Put_line(first_name ||) ' '  || last_name);

  DBMS_OUTPUT. Put_line (Address.Street);

  DBMS_OUTPUT. Put_line(Address.City ||) ', '  || Address.State | ' ' ||

  Address.Postal_Code);

  END;

  END;

  /

  Post edited by: user8367258

  Grand... Thank you... That's what I'm looking for.

  Thank you again...

• Info by exception display JDev 11.1.2.1 ADF task flows activity

  Article 22.4 of the 11.1.2.1 Fusion developer's guide tells me how to designate an activity as the exception handler for a workflow. I followed the directions; created a page error, placed in the workflow, marked as the exception handler. I force an exception and indeed the page.
  
  What I don't know is how to extract the data of the exception, so I can filter, format and display it. How is the exception page receives the exception data?
  
  This level of exception is adequate handling? All my treatment in the workflow. If each of them has an exception handler is something more, what I should do to catch exceptions alll?
  
  Thank you, Steve

  You can use

  #{controllerContext.currentRootViewPort.exceptionData.message}
  

  also chk
  ADF task flows of exception handling

• Simple method to display the pictures stored external oracle xe, in a region of html

  Hallo!
  
  I've created an html area on my Apex (4.0.1) pages and I want to display an image (and), which is stored in a folder of OS inside this region!
  
  What is the easiest way to do this?
  
  Is it possible using the URL or better through B-file.
  
  There is here a small tutorial or any code sample?
  
  Thank you

  Hello

  Here's how you can show images from the folder on the server:

  This is just example and suppose you create the new application.
  I assume that your XE database is windows machine.

  Connect to SQL plus as SYS and create the directory

  create directory my_img_dir as 'c:\my_images\';
  

  Grant privilege read on directory (ANONYMOUS) user to DAD

  grant read on directory my_img_dir to anonymous;
  

  Grant privilege read on directory to your application to the analysis of schema. Modify the "my_schema".

  grant read on directory my_img_dir to my_schema;
  

  Create the new application and 2 blank pages. I guess the first page (id 1) is where you show images.
  Second page (id 2) is just for the appeal process.

  Create point of application process "on the cloth: before the header."

  DECLARE
    l_lob     BFILE;
    l_length  NUMBER;
  BEGIN
  --
    l_lob :=  BFILENAME('MY_IMG_DIR', :REQUEST);
    l_length := DBMS_LOB.getlength(l_lob);
    --
    htp.flush;
    htp.init;
    --
    htp.p('Content-length: ' || l_length);
    --
    htp.p('Content-Disposition: filename="&REQUEST."');
    --
    -- close the headers
    owa_util.http_header_close;
    --
    -- download the BLOB
    wpg_docload.download_file(l_lob);
  --
  END;
  

  Make the process conditionally if the page is 2.

  Region HTML on page 1 to create and place the source of the region

  Replace "my_picture.gif" with the name of the image you have in the folder c:\my_images. The image name is case sensitive

  Kind regards
  Jari

  Published by: jarola November 18, 2010 02:36

  I notice that you mention your OS.

  Above statement replace c:\my_images\ by/var/my_images for example.
  Make sure that "others" have read permission on folder and files it contains the image.
  Group and owner of the folder can be for example root

• Inspiron 2650 'View System Info' not see newly installed memory

  You wanted to spend this memory to laptop to hand to his grandchildren.  Original Config: 128 M RAM 128 M plus additional system in the "support extensible user."    After checking with Dell, I ordered a key of 256 M to replace the 128 in the decision-making of the user.

  'View system information' in 'My computer' has not seen the new memory.  Reference called Dell.  They said they had sent me the wrong memory.  I now have the correct memory for shipping.  Meanwhile, I reinstalled the old stick of 128 M.  'View system information' reports STILL 128M.

  My question: do you think that the system actually USES the 256 origin but only REPORTING 128.  Or what the hell is happening?  Is there another place (in addition to seeing the news system) to see what resources are actually on board and used?

  
  

• Satellite Pro U400 - need info on external display connector

  Description of technical data shows: 1 x external monitor

  What kind of connector is this? VGA, DVI, HDMI

  Hello

  On this laptop model single VGA port is available (RGB port).