Inspiron 2650 'View System Info' not see newly installed memory

Similar Questions

• After the awakening of system does not see the sound card

  Hello

  I have a problem with the Hibernate. After the wake-up system do not see my card (creative sound N2 on USB key). I've been in touch with Creative and I know that I need to uninstall my laptop Realtek sound card in BIOS. Of course, I don't see any possibility in the BIOS. In Windows XP Home edition, can I uninstall this sound card, but after reboot this card is itself back installation.

  And I want to know how to completely disable Realtek.

  Hi Tomasz

  One question;
  You're talking about on a map of external sound that is connected via USB to the laptop or talk on the Realtek integrated sound card!

  I know a similar sound problem on Vista OS.
  I read in the knowledge base Microsoft on similar problems;

  Please check this:
  http://support.Microsoft.com/kb/929685/en-us

  Please provide more details if this fix will not help you!

• system does not see the hard drives as P6000 Windows 7 Pro 64-bit

  PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.

  Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%

  Now the system does not see the drive, but he sees no RAM, etc.

  Anyone know what causes this?

  Can what information I give to help troubleshooting?

  Thank you!

  Hello:

  Try resetting the CMOS.

  If this does not work, I would say that the drive controller in the motherboard is dead.

  Clearing CMOS

• Re: Driver for Toshiba system do not run after instalation

  Toshiba system driver not running after instalation in 64-bit windows 8

  Please post more information. Model of laptop, OS, what you're doing and which driver exactly make trouble.

• Vista system does not see the files that are on a CD of HP, Intuit and others

  CD allows you to install different products does not work on my Vista Ultimate system when the CD has been made by the manufacturer to support Windows and Mac OS.  These CD work in an XP system and a Windows 7 system. I have two optical drives on the Vista system (two allow DVD writing) and installation CD fail the same way in the two discs.

  If I share a CD drive on the Windows 7 or XP System I and then place the CD in the drive, I can see all the files on the Vista system.  Another CD that do not also for Mac OS work well in all my systems. So far, a single CD of Intuit and two HP is failing.

  I made several complete scans of my system searching for virus using two tools each of Norton and Microsoft and can't find anything.

  When I said above fail, I wanted to say that Windows Explorer displays an incomplete list of files on the CD. To be more precise, the list displayed on the Windows vista system does not include autorun.inf or setup.exe. There are also listed things that should not be registered on a Windows install CD. VolumeIcon.icns and background for example. Basically, it seemed something to tell readers that they are on a Mac system.

  Earlier today, I solved this problem. It seems that someone (probably me or my son) XPlay 3 was installed on the system. For some reason, this included a copy of MacDrive. I think that MacDrive caused the problem by making the part Apple Mac of the CD to be the only part that was visible to my system. I uninstalled XPlay 3 and everything works fine now.

• Firefox 4 does not appear newly installed plugins navigator.plugins array

  In Firefox 4, I'm trying to detect with javascript whether a certain plugin is installed by looking in the navigator.plugins array. (https://developer.mozilla.org/en/DOM/window.navigator.plugins)

  It seems that the newly installed in Firefox 4 plugins do not appear in this table.

  I restarted Firefox, and they appear in the Firefox Add-ons Manager, but not in the navigator.plugins array.

  I know Firebug works because I used it to show me the contents of window.plugins.

  (In addition, you can even see that your script does not pick up Firebug when you got my list of plugins automatically to fill the field 'Installed Plugins' in this post.)

  I think that the plugins installed via an XPI file as an extension should always appear on the topic: plugins page. I'm using Linux and this is how to install the plugin Silverlight (Moonlight).

  A good place to ask questions and advice on web development is the forum mozillaZine evangelism/Web development Standards.
  
  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=25

• How to move the original system to the SSD newly installed without an optical drive?

  I want to buy a W530 and spare SSD upgrade.

  I want to order one without a DVD player.

  How to move the system of origin, drivers and other software for the SSD newly installed without an optical drive?

  Hope someone could help me. Thank you.

  The two utilities that I mentioned manage alignment automatically. Also, I photographed my hard drive, then restored the SSD. I have no clone, which means a direct copy of the HDD to the SSD.

  I just went through this myself in July, using Acronis True Image 2012 to get my existing on my 256 GB SSD mSATA HARD disk image. It worked like a charm. I checked that the SSD has been properly aligned.

  See:

  Migrate to SSD

  and:

  Check the alignment of SSD

  Now stop worrying!

• Laptop does not see additional RAM memory

  I just used satellite 2800-200 with 64 MB of memory on board, she also had 128 MB in memory but does not see it. I though that it was a problem compatiablety so ordered the new memory 128 MB ram pc100-sodimm Arch shows what that good memory for this machine, but he does not see this is y at - it something wrong with the motherboard or I missed something please help!

  Hi Paul

  As much as I know a lot of third-party RAM module are not recognized correctly. In my opinion, you should change it and check Toshiba or Kingston RAM module because this module are tested with Toshiba units. Otherwise contact the store you purchased this module and explain the problem to them. If they ensure that it works they must be able to give an explanation.

  I have Satellite 1900 and last year, I had a similar problem. To save my money, I ordered a cheap package and it was a bad idea. I sent it back and ordered from Toshiba. It was a little more expensive, but it works perfectly.

• Adding SCSI - HOST OS card works fine, GUEST operating system does not see the new hardware

  I have a HOST Windows XP Pro SP3 with VMWare v6.5.2 running Windows Server 2003 R2 STD, SP2 as OS GUEST running on any new Dell Precision T3500 Workstation.

  I've closed the COMMENTS and then HOST. Installed an Adeptec SCSI 39160 card in the PC. The card is a 64-bit and is installed in a PCI 32-bit slot. (It is backwards compatible with 32 - bit)

  Powered on PC. Install the drivers of Adeptec on the HOST. Works fine and I can see the card under Windows XP. Rebooted and everything is always OKm POST shows the installed card and search devices. I have no device attached at this point.

  GUEST operating system has started and it does not automatically detect the card. Tried to run the Add Hardware Wizard and same result. Tried to use VMWare to install the new Hard ware with no result.

  Can tell you how I can get the OS TO see / use the new SCSI card?

  golden rule:

  old guest will love the buslogic controller

  new comments will love the lsi-logic controller

  It depends on your guest

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• View composer does not see the VM images parent after Virtual Hardware 7 upgraded?

  I upgraded to 4.0.1 view last month, then there are 2 weeks, we have upgraded to vSphere. After the upgrade, I upgraded to VMware tools of a VM parent, improved virtual hardware 7 and took a new snapshot. When I go to the view admin console I don't see the new snapshot, I made available in the form of default image. It works very well so that the virtual machine is stored virtual hardware version 4, but breaks after moving to 7.

  Did I miss a step? Anyone else seen this problem? I'm close to the opening of a case of pension on the issue.

  It is an option on an existing pool.  Just change the pool and go to either host or a cluster.  The box should be at the bottom of the page.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• XP system can not see 8 GB microsd sandisk

  I want to download music on a sandisk 8 gb microsd files

  Have you ever been able to use the microSD on the same computer?

  SC 4 GB and a larger capacity cards are high capacity cards (SDHC).  Although there are a few available Microsoft updates that are necessary to allow Windows XP to read SDHC cards, you also need a card reader that can read the SDHC.  If you have an old card reader, it is may not be able to do it, even after applied the update from Microsoft

  This seems to be the latest version of the fix SDHC--> http://support.microsoft.com/kb/934428

• I can play most cd or dvd is ' s.laptop does not see an installed dvd

  I can't read cd or dvd. Auto-start is selected.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Why FireFox 11 can't see newly installed Java 1.6.0_31 on Mac?

  I used the software update on my OSX Lion Mac upgrade to Java 1.6.0_31 - b04-413. The update showed as much success and this is the version specified in the Java preferences utility. I then rebooted and you've restarted Firefox several times, but Firefox ' topic: plugins shows a stale version (14.2.0) and and applet versions 1.1.3 1.2.2 1.5, 1.3 1.3.1, 1.1.2 1.1, 1.6 1.2.1, 1.4.2 1.4, 1.2 1.1.1 and a version of YPI 1.6.0_29 cmdlet. Updated plugins check also shows that I do not use the current version and tells me to upgrade to 1.6.0_31, what I have done. I tried to rebuild the base of plugins Firefox and that did not solve it. Any thoughts on how to get Firefox to see and use the updated Java on my Mac?

  See the reply by saneman here - it worked for me
  https://support.Mozilla.org/questions/924590#answer-324377

• System is not suitable to install a few games

  hey im a relative novice, but had no problem when I bought my computer laptop satellite pro a40 back in October last year. in recent months I have had the problem that some games cannot be installed as a message:
  16 bit windows subsystem: the system file is not suitable for running ms - back to show microsoft windows applications. the strange thing is that some games it allows me to run the disc but obviously I can't save, and games I could already install now cannot me.

  the games have tried include: x - to beyond of the border, the road to fifa for the 98, sid meiers civ World Cup 2 and tachyon the fringe. for a selection of old and new...

  any help would be appreciated. Thank you

  Hello

  Please visit this link
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324767