operation refused due to the elevation

Similar Questions

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• Packages refused due to the overall correlation

  Under the overall correlation reports I see reputation filtering 86,88% and Tranditional 13.12% IPS detection Techniques and Inspection of overall correlation of 0%. I can't see what reputation filtering is blocking or decline, how to see it in the reports? Is also the detection Techniques in traditional IPS what version 6.X?

  Currently, there is no method to see what has been denied by reputation filtering.

  The system has an enhancement request to add data showing the addresses denied by reputation filtering. This is being considered for a future version.

  And Yes, the detection Techniques in traditional IPS is what would prevent a sensor of version 6.x for the same traffic.

• Refusal due to the DNS response

  Hello

  I get after spammed in my syslog all of a sudden our PIX. The incoming port is always the same, but the receiver's port.

  % 2 PIX-106007: Deny UDP incoming 204.117.214.10/53 to 63.xxx.xxx.xxx/21465 because of the DNS response.

  My understanding is that the PIX has called DNS Guard (which I can not turn off) and it corresponds to DNS responses to DNS queries and only allows the first DNS request in. I guess that's what is blocking? How can I prevent continuous errors?

  If anyone can throw some light for a new user of PIX I'd appreciate it. Thank you.

  204.117.214.10 is our ISP (sprint), btw.

  Custody of DNS in the PIX is a number of things, one is that when he sees the query DNS turns off and when he sees the DNS response come back, he checks to see that they meet all upward and closes its doors opening to at the outset. So basically you can only have one answer per request to come back through, any subsequent action will be denied and you will see this error.

  The usual cause for this error is that 204.117.214.10 took too long to respond, and the query was answered by another DNS server. When this response through the PIX, the PIX has closed the session and the answer later 204.117.214.10 was denied. Generally not to worry.

  6.3 code you can disable the DNS guard, although I would not recommend this, trigger this means packets DNS will be treated as standard UDP packets and expire after 2 minutes, rather than just after the DNS response. If you do a lot of DNS requests then this will dramatically increase your number of xlate and conn, then you'll want to keep an eye on it. The command to turn it off is:

  No fixup protocol dns

• due to the change of operating system android, Manager of files hp no longer write to external sd car

  due to the change of operating system android, Manager of files hp no longer write to external sd card.
  Please provide your comments to HP normal file manager.

  Hello and welcome to the HP support community!

  This was caused by the upgrade of Android Kit Kat (4.4)

  There are many free file managers that work still available in the game store.

  WyreNut

• System OR Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  I went to start one of my vi of today and I get this message: NI System Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  No one knows what it is or how to fix it?

  I finally fixed it.  After a complete repair of all my software from National Instruments does not solve it.  I've updated my fpga, labview real-time for 2013 SP1.  Everything seems to work again.

• Game-CDDrive operation is not valid due to the current state of the object.

  It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:

  $paramVM = @{

  VMHost =   $vmhost

  Version =   "v7"

      Name  =   "CompVM"

  Data store = $datastore

  DiskGB =   50

  DiskStorageFormat = "EagerZeroedThick"

  MemoryGB =   4

  NumCpu =   1

  Location =   $Folder

      CD  =   $true

  ResourcePool = $ResourcePool

  PortGroup = $portGroup

  Notes = "DC of DOM"

  Confirm =   $false

  }

  $paramVM . Location | select *

  New-VM @paramVM

  It seemed to go very well.

  Get-VM svr01mid100 | Start-VM

  Then, something isn't quite right.

  $paramNA = @{

  StartConnected =   $true

  WakeOnLan =   $true

  Connected =   $true

      Type  = « Vmxnet3 »

  Confirm =   $false

  }

  Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA

  , I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )

  Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath

  Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!

  I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.

  But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."

  It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.

  To me, that shows that it is trying to boot from the CD, because it is a Windows error.  Moreover, he just trying to start several times.

  Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.

  I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.

  I think we're good.  Thank you!

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• With Move-VM error: operation is not valid due to the current state of the object.

  I only started shows after update to PowerCLI v5.1.  My vCenter is v5.0.  I saw this when moving virtual machines to a data store in a different data store cluster.  The task submits to vCenter successfully and ends, but the Move-VM errors and returns control to the script or command line that ran.

  $> Move-VM - VM somevm Datastore - somedatastore - confirm: $false
  Move-VM: 13/11/2012-16:07:45 operation Move-VM is not valid due to the current state of the object.
  On line: 1 char: 1
  + Move-VM VM - somevm - data somedatastore store - confirm: $false
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm puzzled.

  Do you by chance have a PowerShell v2 available somewhere where you can run the same script?

  As much as I know there no official PS still in PowerCLI v3 support, although there are only a few known minor pitfalls.

  While clutching at straws

• Together-NetworkAdapter returning to "operation is not valid due to the current state of the object"

  I'm using fix - up all-NIC in the host servers when a portgroup is renamed.  Demand seems to make the required changes, then crashses.  I don't see any errors in the list recent tasks in vCenter.

  I use the following code:

  Get-VMHost vmware.host | Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq "ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false
  The error is:
  Together-NetworkAdapter: 17/10/2012 12:16:56 game-card network Operation is not valid due to the current

  State of the object.

  At line: 1 char: 114

  {"+... ancien_nom"} |  Together-NetworkAdapter - NetworkName "newname" - confirm: $false

  +                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.

  SetNetworkAdapter
  It's using PowerCLI 5.1 Release 1 against vCenter 5.0 and 5.0 ESXi.
  Any ideas how or tell you why it's a failure or repair.
  Thank you
  Iain

  No, you should not be a problem.

  Are you by chance using PowerGui?

  There were references to the exact same message when you use an older version of PowerGui and the PowerPack.

  See New - VM error (operation is not valid due to the current state of the object.)

• OracleDataReader: Operation is not valid due to the current state of the object

  Hi all
  
  I am new to using libraries and oracle development tools. I have a project in vb 2010 began when I use the oracleDataReader to read data from my db (10g). by using the following code:
  
  Oradb As String = "xxxxxxxxxxx".
  Dim conn As New OracleConnection (oradb)
  Conn. Open()
  
  Dim test (1000) As String
  Dim counter As Integer = 0
  Dim cmd As New OracleCommand
  
  Connection group conn cmd.
  cmd.CommandText = "table FROM SELECT column where otherColumn > 21 June 11 '.
  cmd.CommandType = CommandType.Text
  Var as OracleDataReader dr = cmd. ExecuteReader()
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  While Dr. Read()
  test (Counter) = Dr. GetString (0)
  Counter = counter + 1
  Loop
  
  cmd ExecuteReader().
  cmd.CommandText = "SELECT FROM table where otherColumn > 21 June NewColumn 11'"
  Dr. Read()
  test (Counter) = Dr. GetString (0)
  
  
  How could change the cmd.CommandText to run new queries? As it is the second command dr.read throws the following error: "operation is not valid due to the current state of the object.
  
  I found stating an another OracleDataReader object will allow me to run another query, I guess that there is a better way to "reset" State of the object first, as opposed to the creation of any new object each time I need to reset the command text.
  
  
  Any ideas are greatly appreciated. Do not forget that I am new to coding, so I know the real C could be cleaned.
  
  Thank you

  ...
  cmd.CommandText = ""
  dr = cmd.ExecuteReader()
  dr.Read()
  ... etc ...
  

  It will be useful,
  Greg

• Restore of VSS snapshot fails due to the incompatibility of serial SCSI

  Hello

  I have a win2k12R2 with unique VDisk Vm. A triggered a quiesce VSS on this virtual machine operation and taken a snapshot of the VDisk. Clone a virtual machine of the instant Vdisk and the virtual machine is not booting. If I'm not using VSS quiesce virtual machine, repeat the experience, the virtual machine is unable to start. Since the tedious debugging, finally found it's due to the incompatibility of serial SCSI. Looks like VSS is striking SCSI serial number in the BCD. When the virtual machine is restored from this VDisk, at startup, VM makes a SCSI inquiry to get the serial number of the drive. If the n series shadow does not, VM is not start. In this case, as long as the disc is instant, hypervisor return different serial number.

  The question is, where does the VSS stores this information to SCSI serial number? Is there a way to avoid this? I use the hardware vendor. I need uniform application snapshots of this virtual machine. If I am able to take consistent snapshots of application and not be able to start the virtual machine that, it is useless to take snapshots :). I'm stuck here, any suggestions how to avoid this?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• LVRTE 2012 installation refuses due to higher versions

  LVRTE 2012 install refuses due to higher versions already installed

  See attachment

  probably LVRTE 2012 is installed, but not visible in programs and features OR...

  In C:\Program Files (x 86) \National Instruments\Shared\LabVIEW run time, they are all visible...

  Perhaps another reason why the application LV closes / disappears without notice... (e.g. security dongle)

• Operating system applies to the machine, but the necessary recovery from another disk machine. Feasible?

  Is it possible to use another recovery disc (not the one that came with my machine) to install a copy of XP and then connect to servers internet for code review and entry of correct product key for my device?
  My repairman installed XP OS validated without problem out of the box, and I continued to date for about 2 years without problem.  This product key on my machine exactly matches my hardware profile and unique machine identifier.
  Unfortunately, I encountered a corrupted file NTKRNL and the complete refusal of all the way to windows, and THEN only do I condone my repairman for a recovery disk is defective.  They ignore my requests all sending me a disc of functional recovery.  I cannot use drive recovery from a friend to get a XP upwards and running, provided reacondicionador is totally unnecessary.
  Is it possible to use a different recovery disk, my friends for his XP machine and then have the MS servers recognize it as my old machine even that I registered at the origin of XP to and get the correct downloads by changing product key what is the cert of Authenticity on the machine?   I find that I use an incorrect product key (for my machine) to get the XP operating system to install, of course.  Have a headache MASSIVE because the material recovery turns out to not work properly now and restful can't be bothered to answer my questions either.
  My machine is not currently connected to the internet to try this, (was constantly in the past, but it has been faulty several months now so I killed the internet subscription).  The MS servers know my machine and I have an XP license valid, and I would go to the trouble to subscribe to internet contact again if I knew it would work.  Without a working computer, don't have much reason to keep my internet connection.

  There is a difference between Recovery Disk from a PC manufacturer and a Windows XP Installation CD.

  Assuming you mean the latter, it is possible - as long as the CD corresponds to the license. In other words, if your license (indicated on your COA) is, say, for Windows XP Home Edition, OEM version and if you are using an OEM Windows XP Home Edition installation CD version, then your COA product key should work. But that's the trap. Everything must match! In addition, there could be complications with some versions of the BRAND. For best results, use a generic OEM version of the CD (aka integrators).
  Here again, the System Builders CDs are not easy to find for most people. In this case, you have two other options:
  1. contact the manufacturer. Of course, Windows XP is an old OS, and I imagine that many OEMS no longer support it. :-(
  2. this site:
  http://www.restoredisks.com/
  Finally, many manufacturers offer a recovery partition which is actually a restore hidden on the hard disk partition:
  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-4UFUYK

• Email problem: Error 550 - 0x800CCC69 - Message rejected due to the reputation of the sender's IP

  Hello

  I have a problem running Outlook Express in WinXP SP3. I can receive but not send an email, I got the error next message when sending email:

  Error 550 - 0x800CCC69 - Message rejected due to the reputation of the IP of the sender (or words to that effect, at least)

  I have other messages on the forum the impression is that this error occurs usually when there is a suspicion that an e-mail account is used to send the spam, but I talked to our ISP and email provider (this does not relate to a Hotmail address) and they said that there is no problem from their point of view , and it must be something to do with OE. We also checked all the settings of the ISP account and everything is perfect.

  Can anyone offer any help?

  Thank you

  This error message comes from your ISP. They refuse to relay messages. Unless you are not connected to your ISP directly, IOW, sending another address through your ISP, they have blocked you.

  Remember their service tech and ask to speak to a technician level 2.

  P.S. When an error message in question, please copy and paste in your message. Wording right can make a difference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA