Optical drive not found. Check the connection of the disk.
This looks like a probable hardware failure. See if the drive is seen in the BIOS. If this is not the case, replace.
Tags: Windows
Similar Questions
-
After I press start, the splash screen appears briefly, then a black screen stating:
Pre-boot EXecution Environment (PXE) v2.1
PXE - E61:Media test failure, check cable
PXE - MOF: exit ROM PXE.
Operating system not found· Try to remove your hard drive and unplug the cable. Then re - attach the cable and re - install the HDD. Somehow, the cable may have come loose and it may solve the problem. If this does not work, follow these steps:
Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not resolve the problem, try the following:
To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:
1. put the Windows Vista installation disc in the disc drive, and then start the computer.
2. press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. click on repair your computer.
5. click on the operating system that you want to repair, and then click Next.
6. in the System Recovery Options dialog box, click command prompt.
7. type Bootrec.exe, and then press ENTER.
Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:· bcdedit/export C:\BCD_Backup
· c:
· Boot CD
· BCD attrib s h - r
· Ren c:\boot\bcd BCD.old
· Bootrec /RebuildBcd
Good luck and I hope this helps!
Lorien - a - MCSE/MCSA/network + / A +.
-
Disk drive not found in the Satellite P845T-102 (Code 19)
Hello
I recently bought a Satellite P845T-102 and the disk drive is not recognized by Windows (Windows 8). Does not appear in my computer, has no light and will not eject.
The drive is a TSSTcorp CDDVDW TS-U633J.
This is the first time I tried to use it so I don't know if it was never acknowledged, or if a windows update caused a problem.
Troubleshooting it says my driver is up to date, and Manager of devices displays the following message is displayed:
"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
I have tried to uninstall the device in Device Manager and rebooting without success and have also tried to download the driver on the Toshiba site.
I would appreciate any advice to help solve this problem.
Post edited by: gt79
I put t know if this will help but check please - http://support.toshiba.com/support/viewContentDetail?ct=SB&soid=445782&ref=EV
-
2000z-400 HP PCIe device driver not found on the HP site
HI -.
Equipment:
HP 2000z-400, S/N: [redacted], P/N: A1L49AV. Clean install of Windows 7 Home Premium 64 - BIT.
All THE Windows updates done.
Go to: manage devices. See: "other devices" / PCI device = not installed.
Go to the HP site for this model/download and install all available software for this machine. No change.
WebCam of thought software would do it. WRONG again, Patrick... :-(
What could be this device and where is the darn for him, please?
Thanks for any advice or suggestions... :-)
Hello:
The PCI device is the Realtek card reader that needs a driver.
If the HP Web site did not work, then try one directly from Realtek on the link below.
DL and install the driver first on the list.
-
Help me...
Hi Shahrul Nizam,
In general, there is a demand that phone provider needs to have installed to connect the phone to work.
Have you got the latest software and drivers for Nokia?
I would recommend that you contact Nokia on this to see what they have to say.
In addition, consider the following bluetooth resources:
Add a Bluetooth device to your computer:
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer
Change settings for a Bluetooth compatible device:
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device
-
SERIOUS NOT FOUND ON THE DISK FILES
COMBUSTION PROCESS GETS INITIATED AND ENDS AT 100% AND THE DISC IS EJECTED. HIS BURNING PROCESS SUCCESSFUL SHOWS. BUT IMPOSSIBLE to FIND ALL the FILES ON THE CD AND the CD IS DAMAGED IE IMPOSSIBLE to USE IT AGAIN HIS EMPTY WATCH. Help, please. WIND 7 BASIC 64 BTS, SONY VAIO VPCEH25EN MCH. IT GIVES THE SAME RESULT IN WMP AND NERO
Hello
1 is the limited issue while burning a particular file?
2 have you made changes on the computer before this problem?
This problem may occur as a result of a software conflict, try the following methods and check if it helps.
Method 1:
I suggest you to uninstall Nero temporarily and check if it helps.
Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program
Method 2:You can also try to burn the DVD using Explorer Windows, then Windows Media Player and check.
Burn a CD or DVD in Windows Explorer: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-in-Windows-Explorer
Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-in/windows7/burn-a-cd-or-dvd-in-windows-media-player
Method 3:If the problem persists, I recommend you to uninstall and reinstall DVD drivers and check if that helps.
Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program
Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Keep us updated on the status of the issue.
-
attach the problem. Tablet connection error: driver not found
I can't connect my tablet which has android v4.2 Jellybean. It shows driver not found. what I can do.
Original title: attach problem
Hi Andre,
Thanks for posting your query in Microsoft Community.
I imagine the inconvenience that you are experiencing when you plug your tablet with Windows 7 system. I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.
- You did it any significant hardware or change software on the computer before this problem?
- What is the exact error message you get, when you say, "Driver not found"?
- Connecting the Tablet via a Wi - Fi hotspot connection when you mention, "tethering problem? If this is not the case, how you try to connect the Tablet?
- What is the brand and model number. the Tablet?
The question seems to be resulting in an incompatible or damaged driver that obstructs the connection. First, I suggest you to check if you are able to connect the Tablet via a USB cable.
In addition, I would suggest trying the following methods and check if the number is reproduced.
Method 1:
Run the network troubleshooter to verify connection of the Tablet problems.
Using the troubleshooter from network in Windows 7
Also, I suggest you run the hardware and devices Troubleshooter to check for problems with the related drivers that can help connect with the tablet.
Open the hardware and devices Troubleshooter
If the problem persists, try the following method.
Method 2:
Manually install the Windows 7 compatible driver from the manufacturer's Web site.
For your reference:
What to do when a device is not installed correctly
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Hey everybody,
My HP Pavilion G6 - 1164sa is coming up with an error "Hard drive not found" at the start up. It also makes a clicking sound. have you tried another hard drive to an old laptop in its place and the works, but because it is not the correct drivers installed for this model most things do not work. Need a solution to this? can I order a new hard drive for hp with all the drivers installed?
Your drivers are posted on your support page > HERE
You can order a hard drive at HP, but it will be a hard drive Virgin, as well as a new hdd retail except at much higher prices. I would like to replace the hard drive with a > hdd retail.
If you plan to use recovery disks to reinstall Windows & software/drivers have one that is at least as large a capacity than the original, may be larger, but not smaller. If you have not written a set of recovery discs, you can usually order from HP for a small fee.
If you can read the Windows 25-character license key attached to the bottom of the laptop there is possibility to download an ISO file, burn it to DVD and install Windows. Then you need to download your drivers on the support site. (Any size hard disk could be used with this option)
-
Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem
My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.
Please suggest
Hi Mohammed Arif a. R,.
You can try to plug the printer again and check the updates of Windows and see if the drivers are install.
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
You can also view the following HP Web site and try redownloading drivers and check.
Also check out the following link and try the suggested steps.
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: This article also applies to Windows 7.
Hope this information is useful.
-
OS not found on the c: drive, cannot start windows
Today, I tried to restart my laptop and all of a sudden, they won't let me restart. It keep telling me that I can't or my hard drive is too small. and I tried all the option, even tried to restore my c: drive, but then he told me that I have to choose: full system restore:.
However, full system restore wasn't in one of my options and after that I dropped to restart the laptop want to just start over my windows, but then I can't do more because in the Windows error recovery just an option that is recovery tools, it doesn't have the choice as boot the system normally.So now I can't enter to windows or restart my computer, how do I get into my windows again? Help, please. :(
Hello
1. What is the exact error message you get?
Method 1: I suggest you try the steps from the following linkWindows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540Method 2:
go to the BIOS (Basic Input Output system) Setup, & change the switch setting between AHCI (Advanced Host Controller Interface) and IDE (Integrated Drive Electronics), SATA (Serial Advanced Technology Attachment) and the drive controller is restarted. If it solves your problem, the driver for the HARD disk (HDD) is corrupted.IMPORTANT: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Method 3: Your hard drive is damaged to the point that it cannot even recognize that Vista has been installed on it. If you have a Windows Vista installation disc, you can try running chkdsk to fix the HARD disk; you need to restart (boot) your computer using the installation disc.
a. Insert the installation disc and restart your computer.
b. click the Start button, click the arrow next to the button lock and then click on restart.
c. If prompted, press any key to start Windows from the installation disc.Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see check the link for the BIOS: frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/BIOS-frequently-asked-questions
d. choose your language settings, and then click Next.
e. click on repair your computer.
f. Select the operating system you want to repair, and then click Next.
g. in the System Recovery Options menu, click command prompt
h. type chkdsk /f / r and press ENTER.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lostThis will perform a disk check and perhaps recover the system. CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors
Method 4: I suggest you run /ScanOs, /FixBoot commands from following link:
How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392 -
How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.
[Profanity removed... MOD]
Hello
I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
ACPI\VEN_HPQ & DEV_0004 driver not found pavillondv6-3151sf
ACPI\VEN_HPQ & DEV_0004 can not find the driver for this. HP pavilion dv6-3151sf
Hello:
You need this version of the driver ProtectSmart...
-
Internal drive not found, trying to reinsert the hard drive Alienware R4
I had a few problems leading to myself for buying a new drive hard drive for this reason "internal drive not found, try to reinstall the hard disk.
I did a test of Epse and found that the hard drive had problems.
so I went out and bought a new, replaced the old and the new and always with the same error "internal drive not found, trying to reinsert the hard drive."
I ran the test Epse, there is no problem with anything, it was a successful test. So why am I still unable to cross the screen?...
Anyone have by chance any suggestions as to why it is continue to happen? Can I get a helping hand please? :/
OK, I think I'm making progress.
I changed my starting uefi to legacy, now I'm on the screen of windows install! Woohoo
one problem, I don't have a windows installation cd or anything, I have to buy windows 7?
or is there something I can do to restore my original?...
-
Error retrieving Tecra A6 (hard drive not found. Error: F3E1000001)
Hello
I want to recovery my Tecra A6, but when I insert the first (of three) DVD and restart my system to get to the recoveryMenu (when booting from the recovery DVD) just rebooted my laptop and every time I try this (very simple procedure) this
happen again.
That's why I tried to get it back to Win XP > Toshiba Recovery Wizard... in the first DVD in the 'BIN' folder there isn'ta "RECOVERY.bat" batch file when I run this file will open a CMD window and checks are willing (and then the
following text is displayed in the CMD window :)
"
Verification of DMI
Verification of RAID
Failed to initialize the raid class.
Check the HARD disk
End of the error
"
and a new window opens with the following text:
"
an error has occurred.
Error: F3E1000001
Hard drive not found.
Please press [OK] to turn the computer off.
"
If I press OK the any immediately goes down (without shut down windows) and I have to restart.
Also my laptop works properly my recovery DVDs sounds great, I want to just recover my system because of the speed morein Win XP.
Maybe there is a new firmware for my HARD drive or an update of the BIOS so that the laptop could detect my HDD.
In Device Manager, my HARD drive is: HTS541010G9SA00Wait a minute: you try to run recovery as OS installation?
The recovery procedure must be on path:
Turn on the laptop and press the F12 key
When the bootable devices appear put the first media for recovery in the optical disc drive
Choose CD/DVD media from the list and press ENTER
Follow the menu on the screen. -
OMAP4430 driver not found. Where can I find it?
I tried connect my pc to Smartphone, but it came with a message "omap4430 driver not found", if anyone can help me find this driver?
Hello
1. who is the operating system installed?
2 may I don't know the brand and model of smart phone, you are trying to connect to the computer?
3 have you tried to contact the manufacturer of the smart phone for the appropriate device drivers?Check the status of the device in Device Manager.
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Method 1: Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:Follow below suggestions for updating a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyIf you are unable to find the drivers, you may need to contact the manufacturer of the smart phone, they will allow you to install the correct drivers for the device.
I hope this helps.
Maybe you are looking for
-
Why El Capitan has the problem of spinning ball
Since I upgraded to El Capitan, I get a ball of rotation for almost 20 seconds every time I click on the mouse. Why Apple does not solve this problem with the update of last month?
-
It's maddening. After the FF20 update, whenever I open FF the stupid welcome message is on permanent display in a tab. There is no way to opt out. You can't close it. I tried to clean the cookies and cache nothing helps. I even signed up hoping that
-
I am running Windows XP Pro 32 bit. I get a planned update early in the morning, but after reading an article in update of virus, I thought I would check out the updates, which I didn't. Above, is what happened when I tried to check it ME late. He
-
Continuous wireless network adapter lose its network connection
It used to work very well in the beginning, but after a many windows updates, my laptop has started to lose the Wi - Fi connection every several minutes. Windows troubleshooting utility usually fixes the problem of reset wireless network card. Someti