Option expertise in recovery Toshiba 1.0.1.0 utility

Similar Questions

• No option to create recovery/usb drives

  I used my x 220 laptop for a year now and I am trying to port my OS on to a new drive mSATA I recently installed, but cannot create recovery disks to do this. I use rescue and recovery 4.5 for windows 7, but I don't see any option to create recovery/usb disks. I see only options to create a backup of my regular HARD drive and "create recovery media", which only seems to copy the service program of rescue and recovery, thinkvantage on the USB. I know that data that are installed on the USB key is not correct because it is about 500 MB, while I've read online that the complete recovery disk should take about 8.4 GB. I also know that I never created before recovery disks. Y at - it something that I'm missing is not let me create these disks?

  hitokirix wrote:

  is there an easier way to do this?

  It's been a while since I've done it, but it worked in all situations where I tried: call Lenovo support and declare that you are unable to create recovery discs. There are several legitimate reasons to do this, for example from my experience...

  1. my X61s did not come with a DVD player and I don't have a DVD USB drive connected.

  2. my T60p reported all kinds of program errors when I tried to use the utility provided to create diskettes.

  3. an another ThinkPad (don't remember the model number) had a HD crash under warranty. Lenovo sent me a replacement HD but I had no recovery discs. (I had backups Acronis full score but Lenovo didn't and I didn't volunteer).

  4. one of my friends refused the license agreement for Windows on its ThinkPad. Instead, he decided to try Linux. After a few weeks of frustration with Linux, he decided to return to the Windows fold. Since he had not accepted the license to the first start agreement, it had been unable to create recovery discs.

  If your system is under warranty in my experience that Lenovo will send you a set of toll-free recovery disks. You may need to be a little persistent, but as long as you keep it clean, you should get them. Note however the last time I did that was at least 3 years ago so their policy may have changed. Also note that, in any case, my request is legitimate. YMMV.

• How to re - install the Toshiba Utilities (eg. Eco Utility)

  Hello, can someone explain to me how to re - install the Toshiba Utilities (eg. Eco Utility) cleared when moving to Windows 10, insofar as the Toshiba Service Station said we should erase the first versions more old to be again? I don't want the drivers, because I is more public services in question, and I don't see where you can download (Satellite S50 (B)
  Many thanks in advance!

  I have exactly the same problem with Toshiba Video Player. I have downloaded the drivers and tried to install it again, but I get error saying that I don't have the video player in my PC. Of course, I don't have it, I uninstalled it just following the instructions of the gas station.

• Satellite Z830 - 11 H, no options in the Recovery Wizard (seed F8 menu).

  Hello!

  I am trying to restore my Satellite Z830 - 11 H parameters using the F8 menu before starting.

  However, when I try to click on the Toshiba Recovery Wizard I get the window where I should be able to choose which process I want to (software factory or remove disk recovery) but instead, I have no choice.

  It's just empty. Do you have anyone encountered this problem before?
  If you have other strategies to restore factory settings, I will be happy!

  Hello

  Did you change the HARD drive or do you remove some recovery files, the files from the HARD drive in the past?

  Usually, you should be able to start the recovery disc HARD pressing F8, then choosing fix my computer-> Toshiba HDD recovery (last option)

  In the case of the HARD disk isn't possible, the laptop recovery recover using recovery media (DVD or USB flash memory stick).
  This support could be created using tool called Recovery Media Creator Toshiba

• Method of recovery Toshiba - which has put in place is the best

  I bought a new laptop and on setting up it asks me to choose a method of recovery. The options are
  -Recover out - of - box-state (System Recovery Options are included)
  -Recover without changing the hard drive partitions
  -Get a custom size partition

  What is the best option to select?
  I think that the custom would be best once I have composed my recovery discs after the complete series but want to be sure.

  Can anyone help?
  Thanks smilee

  Hello

  -* Back to the out of box - the State (System Recovery Options are included) *.
  This Option affects your laptop in return, the factory default status. Partitions will be deleted and recreated, as it was the first start.
  Note: All data will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve without changing the partitions of hard drive *.
  All data on the first partition will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve a custom size partition *.
  All data on the HARD drive will be lost and the recovery of HARD drive Option is not available, if you want to find your laptop again. Make sure you have a DVD created for the future of recovery

  Here the FAQ
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• Re: Satellite Pro A120: cannot select an option on the recovery disk

  Hello

  I have a Toshiba Satellite Pro A120, which has recently been faced with the "alert: System protection failure! "password:" problem that it turned up on some BIOS password unknown on its own in the middle of normal operation.

  I got that fixed local Toshiba ASP.
  But now, when I was about to reinstall the Windows cos she had slow, the possibility that the recovery media normally give to just format the first partition become invalid.

  In the settings dialog box, the option is always there but it cannot be selected by clicking on it (from the color of the background showing this option not valid currently)... which means that the only selection (selected by default) is format all of the 38 GB... I don't want to do.

  Someone knows what is wrong and how can I solve this problem.

  I assume that you are using Windows XP and the restore CD also contains the XP operating system.
  It s also interesting if this option has worked in the past?  :|

  However, it s really mysterious that the solution cannot be executed and unfortunately I do not know why it happened

  In the worst case, you'll have to back up data from the HARD drive and format the whole HARD drive :(

• Equium A100-338 - Missing recovery Toshiba in the menu Wizard

  I have a Toshiba Equium A100-338 I need recovery to factory settings.
  I know I have to press f8 and go to the Toshiba Recovery Wizard.

  My problem is that this option is missing and has been replaced by 'Restore the whole Windows operating system'. When I click on this option, I get a generic message, saying that I have to restore from a restore CD.

  My question is, is it possible to manually start the recovery in the command prompt? The wizard needs to run a program. All I have to do is find this program. I know that I have the recovery partition (I used Ubuntu to recover files of the user, and should it upward).

  Hello

  Just a simple question: If you have problems to start the HARD drive recovery, why you n t use the Toshiba Recovery disk?

  It can also restore settings from the factory with all the drivers and tools, so it of the same wait it erases the entire HARD disk.

• Equium P300-16 t: I lose the option of using Recovery DVD HARD drive recovery?

  Hi sorry to post again but I need some help please.

  I posted on September 11, as well, but could someone please tell me if I lose the ability to restore my computer laptop back to factory default, when you press F8, if I do the recovery with the Toshiba Software DVD.

  As I said before I can get into safe mode but you cannot start my Vista.

  I can't use recovery discs as my laptop came with any disks at all?

  So the only option seems to be is it restore to the factory default.

  I am writing again, as I need some help please...

  Abbi

  Hi abbi

  I can help you
  You know that your recovery disk would fix the laptop back to factory settings.
  This means that the whole HARD disk should be formatted and everything should be reinstalled.
  The recovery disk also creates the HARD drive recovery partition that allows to recover the laptop from the HARD drive.

  You said you didn t get the recovery disks?
  Well buddy, I think you didn't read the manual you would find an info that the recovery disk must be created using the Toshiba Recovery Disk Creator software that is preinstalled on your laptop.

• System stuck on initiallizing partition recovery Toshiba Satellite A305 with Vista o/s HELP!

  My system crashed this afternoon. Several times, I tried running the system since the partition and then recovery from disk ordered directly from Toshiba. The system will run the recovery VERY slowly (usually taking more than 20 minutes to get to the point where I wonder how I want to restore the system. I tried all the options available (personalization of the size of the partition, back out of the box, etc.) to get to the next stage where it begins "initiallizing partition" and it hampers is permanently in this screen.

  Knowing that previous screens have taken a lot of time to load from disk, I even let it run all night and it never progresses a plus! Help, please! I just want to get all work as it did when I got it! I had many problems computer through the years and generally could fix with little or no help, but I've never seen a computer get hung up always runs the recovery of its own system.

  Please let me know if you have answers for me! Fortunately, I will provide additional details related to the technology if you need it to help diagnose the problem.

  I thank all those who are willing to help in advance!

  Hi skippinaround,

  As this occurs when you try to use the Toshiba Recovery disk, you may need to get in touch with Toshiba to get help.

  You can see the following link for more information:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If you have a full version of Vista disc, and then try to use to reinstall Windows Vista.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Factory recovery Toshiba does not lack of partition

  Hello

  Notebook PC no longer starts. When you insert a dvd - w8 to a fabrieksherstel (ex-factory) I get this message.

  + Fabrieksherstel kan niet worden uitgevoerd. Een vereiste stationspartitie Land. +

  + Resumption of the factory does not work. A required partition of a station is missing. +

  Can someone help me what to do please?

  You said that you have inserted Win 8 DVD to do a cover of the plant.

  You use the Microsoft Windows 8 DVD or do you use the Toshiba Recovery DVD 8?

  I put t know which model of laptop you have, but on newer models preinstalled with Win 8 some configuration changes are needed in order to boot from the disc.

  In the BIOS, you must disable secure boot and have switch to MSC mode

  Your comments would be appreciated

• Using recovery Toshiba and Applications / drivers DVD Tecra M2 series

  Hi all, I have a problem to format my laptop Tecra M2. When the installation starts, you will see an error at the Command prompt. the error indicates
  Failed installation aborted/a process!
  A:\ >
  Please help me how to fix it

  Can you please explain what you do exactly?
  Do you use the Toshiba Recovery CD facilities to install the OS?
  Please describe what exactly happens when you start recovery image.

  Applications/drivers CD/DVD, you can use if you have installed the OS using the facilities of Microsoft CD.

• Can I drive recovery Toshiba Equium A300D-13 x?

  I would like to know if I can get the Toshiba recovery disc.

  As I can't load hard drive and I don't have the disks.
  Thank you

  Yes, you can order the CD of Toshiba Recovery directly. The link to the website did the Akuma already post.
  Or ask your local ASP for a new.

  In addition, if you have an operating system running (Vista), you can create the recovery disc with Toshiba Recovery Disk Creator.

• Product is complete recovery - Toshiba Portege M300 does not start

  Hello.

  I have a Portege M300 Toshiba I got again in 2006. It has progressively slower over the years, so yesterday, I thought I would use the product recovery CD to reinstall the factory settings.

  Put the CD in restarted with F12, selected CD player, follow the instructions on the screen, he went through unpacking process... but once completed and handed over to market get you the Toshiba welcome screen then it seems that it will start, but it blocks just with a white screen... nothing not even a cursor flashing.

  The hard disk does not even appear to be spinning?
  I tried this process now 6 times and I'm starting to pull my hair!

  Anyone got any ideas?

  > The hard disk does not appear still to be spinning?
  Well, it looks like a disc is defective.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  I think that you need to replace the HARD drive and should reinstall the OS once more

  Good luck

• Reminder of recovery Toshiba

  I've had my computer for 2 weeks and it keeps prompting me to create a recovery media using this:
  Toshiba Recovery Media creator. When I try to access the creator, it gives the following message:

  The creation of means of recovery is impossible! Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  I want to create recovery discs. Why am I not able to?

  Hello

  Can you tell us which model of laptop you have please?

  Try to start the creator of recovery as an administrator and disable the firewall and security such as anti-virus software. Then try again.

  Can you start the HARD drive recovery?