Options available to support the control of software

Similar Questions

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• The tab broadband is weak and his option is missing in the wireless radio software

  Hi all

  I just bought this model Lenovo ThinkPad X201T 2985-DLG tablet before yesterday. Since then, I try to use my card SIM G3. Tab broadband is weak in the dial-up connections, and I noticed that his option is missing in the wireless radio software.

  I contacted the support (the Saudi side of IBM) SBM team and they gave me with a link to a very long list of drivers the most that are for other versions of the OS. I noticed that most of the suggested drivers were already made and the Thinkpad is up-to-date including the bios.

  to confuse more, I do not have my SIM card so far. I'm in the fight to get the bandwidth (WWAN) living.

  Any suggestions or solutions will be highly appreciated.

  Abdullah Al-Azraqi, PhD

  College of Health Sciences

  University of Dammam

  You can find compatible cards here:- http://www-307.ibm.com/pc/support/site.wss/migr-70697.html#10

  Yet once, you do not have wimax option, your wireless card is only Intel AGN.

  I hope this helps.

• "Options files" disappear from the control panel.

  My PC has been infected by a virus. I've updated my antivirus, scanned the whole system and remove found viruses, but 'Options records' disappeared from the control panel. When I turn on the PC, a message appears saying that "Windows cannot find «scvhost.exe"»

  I'd appreciate any help.
  Thanks in advance.

  The computer is still not clean or the malware did too much damage to the operating system. First of all, make sure that the computer is really clean looking at these removal steps:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you were this meticulous, you are ready to move to the next step. If you were not this thorough, do the work and maybe the problem will be solved.

  If the computer is really clean, you can try a repair installation. If the repair installation does not work, back up your data and do a clean install of Windows.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• no option available to accept the license agreement for Vista Service Pack 2

  I try to install service pack 2, but fail to accept the terms of the license and continue the installation. My only option is to cancel - the 'next' button is grayed out.

  The window shows the license agreement appears to be too small first, because some words are cut off. I'm still not sure that it displays the entire agreement. The last line displayed is:

  VistaSP2_RM.0_UPGR_RTL_en - us

  I tried to adjust my display settings and the resolution to see if that would help, but it didn't.

  This occurred when you try to update through the Windows Update tool, and then I went to Microsoft and downloaded the stand alone and got the same results.

  Any ideas on why this is happening and how I can get around it?

  Hello riblit,

  Thank you for using the Microsoft Answers forum.  I suggest you download the Service Pack again.  Here is a link to the download site.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• material and audio option is missing in the control panel using professionals widows7

  I was looking to create a link put in HDMI as an option to play the sound.  I don't understand why the control panel option is missing.

  Hello

  There is no option material and audio, just a good option.

  Open Control Panel.

  In up/right, select one of the options icon in the view by: menu.

  Click on the sound icon.

  Concerning

• iPad not an option for display in the control panel overlay of the Folio.

  During an hour 4 creators in our office were not able to get a glimpse into the control panel overlay of the folio. We are all on Macs, CS6 with worm tools. 25. we all could see a preview before that. We can get a glimpse on the desktop, but the iPad does not appear in the menu drop-down overview.

  We have deployed patches on Wednesday to address the issue with the Preview on the device not working is not for iOS devices. Please visit http://status.adobedps.com/?p=130 for more information on how to obtain the fix.

  Neil

• No option available after installing the plug-in for Microsoft Visual Studio 1.2

  Hello!
  I am a developer of a new blackberry, and I'm doing my first sample.
  I have experience with Microsoft.Net (Asp.Net and Vb.Net) but I've never done anything to a smartfone.

  So, I followed these steps:
  -J' read the documentation.
  -J' downloaded the "plug-in for Microsoft Visual Studio 1.2";
  -J' downloaded 'Simulator 5.0. "
  -J' installed the "plug-in for Microsoft Visual Studio 1.2";
  -J' installed the Simulator "5.0".

  Everything worked fine (I received no error message).

  After that, I tried to initialize a "Hello World" application in Visual Studio 2008, but I can't find any blackberry resources. There is no options in any menu of Visual Studio, there is no new project type, there is no option on the menu "Add-in manager.

  I found a video saying where to find the browser "BlackBerry" in menu "browser with...» "my project (when I click with the right button mouse), but this option is not there. I have not all references to the library or just about any BlackBerry resources on my VS2008.

  Can someone help me?

  I am grateful for your attention.

  Best regards

  João Paulo.

  [email protected]

  Check out the following thread... It should give you the manual steps on how to get the BlackBerry browser in the dialog "Browse with.."

  http://supportforums.BlackBerry.com/T5/Web-development/I-don't-see-BlacberryBrowser-in-quot-Browse-wi...

• What are the options Muse should support the Articles?

  I've been using Wordpress for my customers mainly because of its powerful ability to blog. How can I configure my clients to the top of the blog pages actually incorporated into the Web site, so that blogging really refer people to the Web site and increases SEO?

  Thank you!

  Hello

  Muse is a design software. To create blogs, you need space on the server, database, etc.. If you host your site on Business Catalyst, you can take advantage of the BC blog feature, which is easy to integrate into the site of Muse. For more information, please see the following links:

  Catalyst for help | Add a blog

  Add features of Business Catalyst to your Muse sites | Learn Business Catalyst | Adobe TV

  Kind regards

  Aish

• Possibility to change the brightness of the screen is no longer available in the control panel

  original title: I cannot adjust the brightness of the screen more! Why this option disappeared suddenly from the control panel? It was fine last week.

  Every night, I turned off my screen. Suddenly last week, this option disappeared.

  Hello

  You did material recent or changes to software on your computer before this problem?

  Step 1: If the computer does not display the option to adjust the display brightness, check with the manufacturer of the computer for a BIOS updated to support this option.

  You can also try to update the drivers for hardware from the computer and check.

  BIOS WARNING
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: You can also try the system restore feature and restore so far when you were able to see the brightness of the display option in Control Panel.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  I hope this helps.

• Function editor does not support the pointer to the digital type

  Am I missing something or is it true that the CVI function Panel Editor does not support specifying a type parameter as a pointer of type number?

  I see no reason why he wouldn't or shouldn't.  It supports the pointer to char.  And it supports a table name (which, in C, is a pointer to the first element of the array).

  I guess I could use the array form as a pointer, but surely it's confusing when dealing with a simple pointer to a numeric scalar type.

  I am using the function Panel Editor only for the purpose of creating a dictionary of type so I can call functions DLL in VB.  Y at - he know somewhere how CVI types could are mapped to the VB types when you use the type dictionary?   for example, what happens if I use an unsigned int in a function parameter (VB does not support unsigned integers)?

  Menchar

  Hi Menchar,

  To create a pointer to an integer as a parameter to a function panel, you have two different options.

  First of all, all output parameters are defined as the default pointers.  So if you create an output parameter of type "int", he creates a ' int *' parameter.

  Second, if you want it to appear in the entry list, you can create a data type in CVI which will appear at the bottom of the list.  Data types to change your data types, go to the Options"(you must have a function Editor tab open and selected Panel to make this option available).  Enter the name of the type (in this case ' int * ') and click the Add button.  The new "int *" option should now appear at the bottom of the list.

  Third, you can use the array form (int []), but as you say, which can be confusing for other people looking at the code.  Or the other of the two first options are better choices.

  As for your second question, here's a link to a page MSDN showing types in Visual Basic and their representations .NET: http://msdn.microsoft.com/en-us/library/47zceaw7 (VS.80) .aspx.  This allows to make a comparison between VB and ANSI C data types.  For example, to ask on unsigned integers, and this site shows that Visual Basic has an Integer type (-2,147,483,648 through 2,147,483,64) and an unsigned return, UInteger (between 0 and 4 294 967 295).  From what I can tell, VB has signed versions of all its digital representations.  You can then take this with a list of ANSI C data types to convert between the two.  A list of ANSI C data types can be found here: http://www.exforsys.com/tutorials/c-language/c-programming-language-data-types.html

• Eclipse supports the device 4.3 simulators earlier then?

  Eclipse supports the camera with software version 4.3 simulators earlier then?

  You see simulators of the device with the version of the software prior to version 4.3 installed on your computer in Eclipse? If not, how do you development for these simulators of the device? If Yes, please explain if it does automatically when you install Eclipse and the device driver, or you do something more?

  I found the answer.

  No it's not. see the following topics:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=9828

• Object Style options is missing options that exist in the Options of the Export Object

  I noticed that when I select the object Export Options, there are more options available than in the object (InDesign CC 2014, Build 10.0.0.70) Style of Options. In particular, I am interested on the options for custom CSS width and height. It would be much easier to create an object style with custom CSS width and height values that define the same setting for each object separately. Any reason why this is so? I don't know no personal Adobe following these forums but I hope they see this gap in their product.

  

  

  Hi changilainen2,

  Yes, we follow the Adobe Forum!

  Thank you for your contributions. Actually implement this feature we were bit confused if it is more important to have these options in the object Styles. This is why you are missing here.

  But comments from you and a few other people, made us realize that we should have it in object styles too.

  Thank you that we will try to integrate this into the feature.

  ~ Monica.

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.

• OfficeJet 7610: upgrade to Win10, no longer have the option of scanning in the HP software.

  I upgraded to Win10 and had to reinstall my HP software.  Now the HP software shows that the printer.  I don't have the option to scan or fax from the HP software.   Ran the HPDoctor and said msg that some updates have been made to correct the scanner.  Ran the scan test and got a msg that the scanner was not available, but I was able to scan from the software Windows FAX/scan very well.  Help!  I prefer to use the HP software for scanning.

  Hello

  Thank you for using the forum.

  Have your downloaded and installed the full features software?

  Here is the link for your convenience;

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/5153789#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you should be able to print and scan.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.