Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

Similar Questions

• Windows vista allways ask what I want to open the program with?

  Hello. I have windows vista. recently, whenever I open a program he asks me what I want to run it with. have said that it is a problem of regisry so I restored my way the computer back until the day it worked very well, and he always asks me what I want to start my program with. I can not open all of my antivirus software to see if there is a virus and to remove this virus. can your help please?

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• Lately when I run Firefox a warning window will appear asking what I want this program to make changes to the computer. In addition, I'm unable to download PDFs from other sites.

  This problem started about two weeks ago.

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the Firefox program directory.

• How can I add "Shut down" as an option for the action of the Power button if it is not available

  How can I add "Shut down" as an option for the action of the Power button if it is not available.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you want to add shut down as an option for the power button.

  Visit this link and try the steps mentioned:

  There are two ways to change what happens when you press the power button on your computer. You can change what happens when you press the power button on your computer case (or the edge of your laptop) and you can change what happens when you press the close button in the start menu.

  Change what happens when you press the power button on your computer

  http://Windows.Microsoft.com/en-us/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Hope this information helps. If you have questions to answer us and we will be happy to help you.

• Disable the control key for the Start button in Windows XP

  Hello. I would like to turn off command for the Start button (I mean the left button located on the bar of Windows XP tasks); How can I do? Thanks in advance.

  PS: I use VMware Fusion for mac 2.0.1 and the virtual machine is Windows XP SP2 32 bit. My operating system is Mac OS X 10.5.6 (Leopard).

  I tried a long time ago and it didn't work.

  I was annoyed, but this thread made me take another look.

  Try this:

  map the command/apple key control rather than delete the assignment.

  It also fixed annoying command + s failure to save most of my applications.

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• hp blue circle on black screen, can\ ' t access the boot options for the recovery disc

  I have installed Symantec disk full encryption and encrypted hard drive. Then I restarted the pc. I get a black screen with a blue HP logo in the Center. The low right sysa message press the ESC key for startup menu, but no key is working. Each button gets a beep. If I turn the power off, then on and press the various f keys, I get different messages but still no answer from all the keys.

  Symantec sent a disc of recovery for deencrypt the drive, but I can't get the pc to load from the drive. Any thoughts?. I reset the computer twice (battery and power cord, hold the power button / stop for 30 seconds)

  I remove the hard drive and then turn on the laptop to see what answer the BIOS.

  From your description of the problem, it sounds as if you may have encrypted the whole disc rather than only the C: volume or the BIOS ROM file is damaged.

  You should be able to go beyond the HP screen to access the BIOS.

  The BIOS should give complain that it cannot find a drive with a bootable operating system.

  If this happens, and you have the recovery disk set or usb recovery media, life is good and you will need to take a look at the Symantek forum to see how to proceed with your encrypted drive.

  If it does not then, the problem is the BIOS on the system board.

  By pressing the ESC key and have the start menu appear is conditional on the BIOS being in good condition. Yours may be damaged. Try download a softpaq BIOS on another PC, extract the BIOS ROM file and put it on the root of a usb key. Put the USB key into a USB port on the laptop. Press the power button and immediately hold down the Windows key and start receiving the B key. If it works and you see an led flash, release the keys and wait. the process must load a BIOS file to replace the one damaged. This takes time, so be patient if you see a blinking led or no reaction from the laptop for a few minutes.

  Post your results here and we can take the next steps, you can take.

  Best regards

  ERICO

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• iPhone Sync with PCI trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  I am trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  Mac or Windows?

• How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  If you have not all panels in the Titler then go and reset the current workspace that is located under the window.

• What are the best options for the composition of math in InDesign CS4?

  What are the best options for the composition of math in InDesign CS4?

  I tried a few versions of the composition of mathematics test. All have their advantages and disadvantages, but I can't decide on which the plugin/script will be the best in the long run (in taking account of the ePub and MathML).

  
  So far the two best seems to be InMath (if it becomes compatible CS4) or Math + Magic Pro.

  
  The biggest pro of InMath is editable on the screen, but it seems to have some risk: http://InDesignSecrets.com/InMath-update-with-new-reader-functionality.php

  
  Math + Magic Pro works well with CS4, but need of equations to modify in the window of their plugin, and because they are EPS format. The file size and the ability to work with a digital player disappeared.

  And MathType seems pretty useless...

  Someone at - it had positive experiences?

  Not exactly the kerning, but you can move blocks wherever you want with the arrow keys. And you can change the spacing between the elements by changing the spacer between them. There are also defects of spacing.

  Batch edit can be something again. I use 6.0, and I see that the most recent version is 6.5.

  I had problems with files EPS of Mathtype, which may include a preview, but do not include fonts. So, I opened each equation of the word with my default settings (they automatically change the default fonts, spacing, size, etc.), copy, paste in Illustrator and save as have. So when I'm finished, my equations are always vector (if that's what you mean by text).

  Microsoft has chosen to implement a version of Mathtype dumbed-down as the editor of Word equations for many years. So for me at least, long term has already been decided. There are several things wrong with Mathtype, but given the choice between the use of Mathtype to * convert * equations and using InMath or mathemagiques to * recreate * equations, I'll take Mathtype, warts and all.

  Ken Benson

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• I installed Lightroom 4.4, serial number [removed-kglad]. Is there an Option for the update of Lightroom 6?

  I installed Lightroom 4.4, serial number [removed-kglad]. Is there an Option for the update of Lightroom 6?

  major version changes are paid upgrades, free updates not.

  Products

• Hi, I am trying to buy creative cloud for photographers, but my profile continues to view the payment options for the Argentina

  Try to pay in Mexico with a Mexican credit card, but couldn't find options in Mexican pesos. And when you fill my card info shows the price in Argentine pesos and there is no option for the Mexico.

  I already change my account and updated information to Mexican day with my address.

  Have not now what else to doy in order to make the payment...

  Weird.

  Thank you.

  Cecilia.

  Hi Cecilia

  The country associated with your Adobe ID is the Argentina.

  You can create a new Adobe ID with the country or the following workaround solution allows to create a new ID using the same email address:

  Change the country associated with your Adobe ID

  Thank you

  Bev