OptiPlex gx240 and processor of withdrawal. I need a tutorial

Pentium 4 1.5 Ghz I want out.

Pentium 4 2.6 Ghz I want to put

N ° Pentium M use the chipset and taken totally different.

Socket 479 has 479 holes of the kingpins. Although physically similar, Socket 479 has a different electrical pin arrangement of Socket 478, it is impossible to use a Pentium M processor in a 478 normal even Board if it fits into a Socket 478.

Tags: Dell Desktop

Similar Questions

  • Activation issue when replacing motherboard and processor, but no disc?

    Hello everyone. I replace my card motherboard and CPU. moving to 99 X and 5960 x. I will not replace my C drive. It's a free upgrade for Windows 10 so I can move it. What do I have to disable my subscription CC before moving and then reactivate after have replaced the card motherboard and CPU. Thank you Roman

    Hi Rkenosha,

    Hello everyone. I replace my card motherboard and CPU. moving to 99 X and 5960 x. I will not replace my C drive. It's a free upgrade for Windows 10 so I can move it. What do I have to disable my subscription CC before moving and then reactivate after have replaced the card motherboard and CPU. Thank you Roman

    I don't think it's necessary.

    But after getting the card mother and processor changed, you may need to sign in again.

    Sign in with your Adobe ID and password.

    Thank you

    Ilyes Singh

  • HP Pavilion 15-ab150sa: HP Notebook System BIOS update (and processors)

    Hi, I bought the HP Pavilion 15-ab150sa last weekend and have had many problems since getting it. Kept freezing and condensation WiFi shortly after logging in.

    I found there were 6 updates that need running that are not automatically showing until I scanned for them in HPSA.

    Its took me 4 days to get the updates for the most part actually fill and it seems to work a lot better now, however, I have an update for HP Notebook System NIOS update (AND processor) keeps a failure...

    Any ideas?

    Please keep it simple, I'm not very good with technical information. :-)

    Greg

    Hi Greg,.

    Try the following.

    If the update of the bios still work in HPSA, click the Stop button.

    Close HPSA, restart the computer, and then download the update of the Bios from the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75199.exe

    Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

    Note:  If the update option arises as being 'blocked on this device', you will need to contact HP in this regard.

    Kind regards

    DP - K

  • DV7 3010eg card mother and processor replacement

    I want to change my HP Pavilion DV7 3010eg motherboard and processor. As well as the graphics, if possible. Need suggestions. Please guide so I can do.

    Well, you can certainly to some extent, but the question is whether you should. There is no Motherboard upgrade. You have the best AMD motherboard that can fit in the plastic case, with the highest card and the best video. You can upgrade the processor to a:

    AMD Turion™ X 2 Ultra Dual-Core M640 35 - W, 2.60 GHz with 2 MB of L2 cache

  • Replacing motherboard and processor, now Vista will not activate

    my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

    * original title - I had to replace my motherboard and processor and not vista won't activate my copy of windows *.

    "meldog" wrote in message News: 44b68b63-556f-44ae-a541-541bef262101...

    my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

    If your Vista came pre-installed, so it's an OEM license - and replace the motherboard except in conditions of warranty is not allowed. Notice of MS, the card mother IS the computer
    You will need to purchase a new FULL version commercial license and edition of Windows you want - from the motherboard is (probably) new, it must run Windows 7 with happiness.
     

    --

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • Upgrade hard drive for small desktop OptiPlex GX240 PC

    I'm looking to upgrade the hard drive in an old OptiPlex GX240 Small Desktop PC. The vehicle currently has a 10 GB Seagate IDE/PATA hard drive installed. Would be the Western Digital WD Blue WD800AAJB 80 GB HDD at 7200 rpm 3.5-inch IDE/PATA or something similar or compatible with this system?

    Here are the current specs for the PC:

    Intel Pentium 4 running at 1.8 GHz

    256 MB PC133 SDRAM

    Windows XP Professional (SP2) of Office Pro 2002

    CD-ROM drive

    Floppy drive

    56K modem

    Yes, the drive will work.

    It is also high time to retire from XP and upgrade - support for (security updates) XP ceased on April 9, 2014.

  • Dell Optiplex GX240 Resource CD

    DOE s anyone know where I can buy the cd Dell Optiplex GX240 resources, with drivers of Dell and diagnoses. I gave Dell a call, and they said that I could download from their pilot Web page and burn a bootable ISO cd. I tried to download, but they are not all the ISO files

    Call technical support again and insist that you want of the disc because the ISO files are not there. Be persistent, and if the first doesn't work not person help, reminder. There is a form you can fill out to get the disc, but I have a lot of success out of this. The phone call has worked always better for me.

  • After the new motherboard and processor installation Windows requires key, key to the sticker will not validate.

    I installed a new motherboard and processor to my PC and now it's me demanding in the news two days to activate windows. I type the product key that is located on the sticker and it refuses to validate. Assistance is needed.

    The key on the sticker code is assigned to the brand of the computer to which it is applied. Regardless of the brand, changed the m/b and the CPU (unless provided by the original manufacturer is a NEW computer.)

    If the advice of George do not work, you will need to purchase Windows 7 new...

  • OptiPlex 7020 and RAID array

    Greetings.

    I bought an Optiplex 7020 and controller card SATA referenced in this post after you speak with a representative and come far from believing the 7020 and the SATA controller card combination would allow me to set up a RAID 1 array. I bought both the 7020 and the controller Dell card.

    However, after several conversations with the Dell and Technical Support Technical Support Startech, I'm still not able to get this working. I am able to enter in the configuration menu of controller card at startup in addition to being able to access the system BIOS. The BIOS shows 'Mass Storage' assigned to the PCI Express slot (as it should), but complains without hard drive being found when I try to start.

    Just for clarity: I'm not trying to use a built-in RAID configuration and try instead to use a controller card to take care of the RAID array. So I am (perhaps erroneous) belief that the 'RAID ON' in the BIOS setting is unimportant because the controller card takes care of the RAID array. BTW: My BIOS is not a parameter "RAID ON". I say just that to prevent an answering machine to take me on the way to the RAID configuration integrated. The 7020 does not come with built-in RAID.

    In fact, this Dell page said I need to "buy additional hardware", which is exactly what I did when I bought the controller card - or at least I thought.

    So the questions are: what should I do to be able to get my Optiplex 7020 to mirror the first drive on a second so that the second is bootable immediately in case one breaks down?  Do I need a software solution instead? Do I need extra hardware yet?

    Thanks in advance!

    If this card requires a driver, so it is probably not responsible until Windows loads BIOS will not be able to see the drives connected on this card to boot from one of them.

    And according to the Manual, the startup options are:

    To specify the order in which the computer attempts to find an operating system. The options are:

    1. Floppy drive
    2. WDC WD2500AAKX-75U6AA0
    3. USB storage device
    4. CD/DVD/CD-RW drive
    5. Integrated NETWORK interface

    Therefore, there is no option to say BIOS to get a boot on PCI - e drive.

    That said, it is made reference to the Intel RAID controller in the manual, which suggests it could work with this system.

    Win 8/8.1 and win 10, there is a built-in utility called "storage space" to create a mirror. Two drives must be connected to the SATA ports on the motherboard and probably identical in size. So give that a try...

  • You can put a Dimension 3000 hard drive in an Optiplex GX240? [PLEASE ANSWER!]

    My dimension 3000 has the blue screen of death. [stop: 0x0000007E] and let me know if you can put a dimension 3000 hard drive in an optiplex GX240

    GX240 has LESS RAM than a dimension 3000.  You cannot run in a GX240 without reinstalling total.

    STOP: 0X0000007E (0XC0000005, 0X804E518E, 0XFC938104, 0XFC937E04)
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    A device driver problem or malware

    • If this issue occurs after the first restart during Windows Setup, or after installation is complete, the computer may not not have enough ram to run Windows XP.
    • The BIOS of the computer may be incompatible with Windows XP, or it might have to be updated.
    • The video card drivers may be incompatible with Windows XP.
    • A system service or a device driver may be damaged.
    • If the problem is associated with the Win32k.sys file, it could be caused by a third-party remote control trojan malware program.

  • I deleted my account and lost all my emails, contacts and saved records. I need to recover and start a new account.

    I had a problem with my password and so deleted my old account before starting a new. I didn't know that I would lose all my contacts, files and e-mails. I need to get their back and then set the appropriate settings and passwords on the new account. So the question is "how to get back the old account information?

    lets start at the beginning.

    How do you delete your account. Uninstalling and reinstalling do not affect the data, if your actions are needed to determine if something could stay.

  • Menu and toolbars, tabs suddenly LARGE, need to reset Firefox, not fixed by eliminating add-ins, only a reset works - help!

    Menu and toolbars, tabs suddenly LARGE, need to reset Firefox, not fixed by eliminating add-ins, only a reset works - help!

    Are you sure that this has not been caused by the Tab Mix Plus?

    Your list of details of the system shows a lot of disabled people with only active TMP extension.

    Have you checked for code in userChrome.css if you use this file to customize the user interface?

    In the Firefox Safe mode, these changes are effective:

    • all extensions are disabled (subject: addons)
    • Default theme is used (no persona)
    • userChrome.css and userContent.css are ignored (chrome in the profile folder file)
    • default toolbars is used
    • JIT JavaScript compilers are disabled
    • hardware acceleration is turned off (Options > Advanced Options > general)
    • plugins are not affected
    • preferences are not affected

  • I downloaded the new version 25 times and it still saying I need to update it please help

    I have a problem with banking and paypal who say I need to update my browser went to feedback from firefox and the screen says I need to update. I get crazy and do not want to use chrome or using internet explorer, I was very happy with firefox pleasse me

    Your User Agent shows you Firefox 3.6.3 installed. Some add-ons can cause an incorrect to show User Agent. In strongly suspect BLNGBAR as indicated in your User Agent (click on "Details more system" to the right of your original question, scroll down to see your User Agent):

    • Mozilla/5.0 (Windows; U; Windows NT 6.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 BLNGBAR

    BLNGBAR can be this: http://blingee.com/plus

    Uninstall it if you

    Once which is uninstalled, follow the instructions in this article to reset your User Agent:

    What is a User Agent: http://en.wikipedia.org/wiki/User_Agent

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

    The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

    Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox if possible.

    • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

    IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

    You need not buy new Chargers.

    You need to plug adapter American Electric type.

    http://www.worldstandards.EU/electricity/plugs-and-Sockets/

    All computers/Apple iOS devices come with voltage: 100-240 v AC.

Maybe you are looking for