OR MAX Test digital i/o Panel crashes

Similar Questions

• First 10.3: Debugging JavaScript in HTML Panel crashes

  Since the upgrade to 10.3 first, we noticed that when you debug with breakpoints in JavaScript HTML panels, when execution reaches the breakpoint, the panel all crashes and recharging.

  We did not have this problem the same panel JavaScript code in the first 9.2 debugging.

  This problem seems to occur on the same lines of script, some other lines of script never make the Panel crash.

  All the tested script lines were simple browser JS, no involved NodeJS.

  I tried the upgrade in my version of the ExtensionManifest element manifest.xml and 5.0 to 6.0 RequiredRuntime element, but nothing helped.

  I've not heard or seen such a problem. Please send me your Panel and tell me where to put breakpoints to see the falls.

• I'm able to generate a signal with MAX test Panel. I am unable to generate a signal by using the example iviFgen.fp or my software. I guess I've misconfigured pilot Sessions.

  I have attached the screen shots that capture "devices and Interfaces", "Logical names" and the "driver Session."

  
  

• Windows 8 - Panel crashes

  I installed Windows 8 on an HP dv6-6096 nr, I bought in May 2011. I did an upgrade to Windows 7 Home Premium. Every time I hightlight Control Panel, the machine returns to the desktop. How can I fix it?

  I thave updated my video drivers. I say what other devices are not usiable in Windows 8.

  I thought I can get a clean install and everything should work, but I don't know if I can re - install Windows 8.

  Thank you

  Update:

  Here's an update:

  1. Dvd6-6096nr HP used feature not STANDARD, the folks at HP, Microsoft and Microcenter were aware of. To change the ways to enter safe mode, F8 is an easy way. For me, it does not. Using the Windows key + x, lets me run msconfig.
  2. Using msconfig and start in safe mode, Action Center tells me that I must install 3 drivers: (Intel wireless driver, HP and Intel wireless display power management Bluetooth). Those that have been installed.
  3. I rebooted the machine, Panel still crashes.
  4. Restarted in safe mode, the Action Center shows that I need to install these 3 drivers.
  5. As Microsoft makes it almost impossible to start windows to update the drivers, it's where I am.

  My choice is (1) install Windows 8 (not upgrade) or forget about Windows 8. The problem is (1) will reactivate Windows 8 and if other licensed software will be re - install?

  I would setup clean if you can, yes he reactivate if installed on the same hardware.

• Trail test since lightroom cc stopt / crashed after booting directly

  I have download the trail for fotograf. After the instalation I want to test the version of Adobe LightroomCC. But after you start the program, it crashed after a few klicks. I restart the computer several times in a few days. But it does not work.

  Yes, it could be because of the graphics card.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom and check again

  In addition, refer to this article: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html#Troubleshoot

• -win 7 64 - all versions of Firefox (tested 17-20.b) keep crashing except if used in compatibility XP sp3

  Since yesterday my firefox crashes, sometimes I have the option to reset firefox or start in safe mode. Using only the mode without failure of firefox works fine (but without plugins/addons)

  So I did a fresh reinstall (No Add ons etc) thought to solve the problem.
  I was using v19 when all this happened so retrograde to v17 hoping to fix it.
  Now, I tried to v20b v17 and all keep crashing when used "normally".
  After the new installation I have more the possibility to use the firefox safe.

  If my recollection is correct, I had a few Java Update at the time of the first collision. I also tried to use the automatic update of win7, but those failed.
  I therefore also uninstalled all java components, installed fresh firefox and tried to start firefox, before and after reinstalling java.

  in all situations is immediately crashes.

  The only way to make firefox work now uses the Windows XP (sp3) to windows compatibility.

  I have no system restore points win7, so there is no option to use.
  All other software (and browser) work very well... only firefox crashes all the time.

  How to solve this problem?
  I looked around and followed all the suggestions I found on topics somewhat related to mine, but nothing works.

  Here is my latest 5 crash reports:

  BP-5c91d587-5e12-4078-8046-0d7ca2130305

  BP-f4292032-9AB9-4682-ac42-3fcaa2130305

  BP-4e56b119-5B52-46b5-A163-174592130305

  BP-921cd557-b2ee-4159-8e29-cd9af2130305

  BP-f9cb9b6c-b4ee-4835-8c2b-b17122130305

  and two yesterday before I the freshly installed firefox

  592a429a-2cf5-4CE6-8538-288612130305

  fd534141-B87A-4BDF-AF98-2d11e2130305

  Disable hardware acceleration, that does not work? Disabling hardware acceleration

• Cannot change the max min digital property

  Hello everyone,

  By right-clicking on a digital control, I can't change the minimum and maximum range. (it is always back to 0 after you type 25 for example to the maximum value, digital is UINT16).

  What happens on every vi in my project, even if I create a new vacuum.

  BUT this is not the case when I close labview, labview open re and open a vacuum vi (not in the project). In this way, I can change the maximum to a numeric property, as usual.

  Is there a project property prohibiting to change a numerical property, in all the vi in the project?

  Did I miss something?

  Thanks for your help.

  PS: I use labview 8.6.

  LV 8.6.1 Bug within the limits of data entry for controls

  The Properties dialog box of data entry for the digital controls do not work correctly in LabVIEW 8.6.1

• Latest version of Digital Publishing Suite application crashes?

  Hello

  I have a valid subscription to CC.

  Just started building my second iPad app, so I downloaded the latest version of the application of Digital Publishing on my Mac.

  My existing applications of DPS are listed, but when I try to create a new application, I get the name of the application and then click, but nothing happens - no warning or error messge?

  Any ideas?

  Kind regards

  Iain...

  Thinking about a simple editing application? If so, it is no longer included in a creative cloud composition.

• 3D "" on"" (nvidia Control Panel) crashes thunderbird if closing a thunderbird menu item. 3D off the coast? Thunderbird works again.

  Well plant? "If the opening of a thunderbird menu item and close, you get a"not responding"" WARNING and the only thing to do is to close the program. Windows 7 can't find a solution.
  This is just a warning.
  It took me a long time until I discovered that it is 3D. (reinstall a virusscanner, a point of restoring 3 times and a full system image)
  I realize there are not many people using nvidia 3d. So I don't expect any change by programmers.
  O, the first time I also had to restart windows after 3D ' "" No idea why it was that the first time.
  I already pulled the 3d module (what the hell he was doing there?) but that did not help.

  Hardware acceleration has been such a problem that the 38 coming version has a user interface in the advanced options to enable the use of hardware acceleration on and off voltage.

  Until then, it is the same job https://support.mozilla.org/en-US/questions/1012145

• Problems with Async write to MAX 'Panel Test VISA. "

  I have a VXI-11 instrument and I am able to use the "Test of VISA Panel" in MAX to write SCPI commands and read the answers. My instrument supports channel from demolition and VISA in MAX test panel allows me to interrupt a (async) reading but not writing. The aborted read the statements of the operation as soon as I press the button 'Give up' with 0xBFFF0030 (user abort) which is the error status and the expected behavior. However, if I write an SCPI command which causes the instrument to not recognize the device_write RPC (simulated failure), I am not able to press the button 'Cancel' in the VISA test Panel. The operation ends finally with 0xBFFF0015 (timeout). Is checked the "Async" box test VISA Control Panel and the text in the 'Run' button changes 'Abort' (just as in playback) but nothing happens when I click it. If I look at NI SPY for the asynchronous writing the entry it says: "operation completed successfully, but the operation was indeed synchronous rather than asynchronous." Is obviously not correct from the Test VISA Panel reports 0xBFFF0015 (timeout), but this may be a clue.

  What is going on? Has anyone been able to abandon an async write using the VISA test panel in MAX?

  I think I stumbled on the answer. If the length of writing is short (I do not know the threshold or if it documented anywhere), MAX or VISA (don't know who) force in synchronization. I wrote a more time control and running async and allows me to have an abortion.

  I'm not sure that this behavior is the idea. Let's say that you write a short command that takes a long time to complete or hangs with the instrument. By forcing the synchronization of Scripture, you will need to wait for a timeout. However, the advantage of the current approach grows short synchronization command is probably faster. The good news is my instrument vxi-11 async stops behavior works by the reads and writes!

• Test Panel does not work with the PXI-6541/6542/6551 in PXI-1002

  Ripping my hair out trying to get the Test Panel can work with system as described below:

  1002-PXI chassis with controller PXI-8176.  In the three places available (from left to right) PXI-6551, PXI-6542 and PXI-6541.  They come in NIMAX, they self test, reset and to calibrate.  But when I try to open a Test Panel, I get an error as follows:

  nidmfpan.exe - Application error

  The application failed to initialize properly (0xc0000142). Click OK to close the application.

  I uninstalled, re-installed, modified and repaired everything NIDAQMX (15.0.1) 15.0 HSDIO, NI-VISA (15.0.1), etc.

  Original symptom is that when I pressed the button on the test Panel, nothing would happen.  Then, the next symptom is that MAX has said MFC90.dll (not found) and MSVCP90.dll (not found) and MSVCR90. DLL (not found).

  I can not find help topics or the forum messages that cover this.  Very annoying.

  Hi fully,

  Sorry to hear that!  Nidmfpan.exe is the process that opens MAX test panels and MFC90.dll is a Windows wrapper.  Combinations of driver reinstall or copy other MFC90.dll files in System32 are unlikely to solve the problem.

  You are on XP?  Try to navigate to C:\Windows\System32 and rename the nidmfpan.exe.manifest to nidmfpan.exe.manifest.back and after close/reopen MAX file and try to open a test Panel.  Is it effective?

  Note that the file you want to rename is nidmfpan.exe.manifest and NOT nidmfpan.exe.

  If not immediately successful, close and reopen the MAX and try the test panels a few times more.  If after several attempts it still does not work and the correct manifest file has been changed, it can point to a deeper problem of Windows that requires a reformatting of the OS.

  Really that's hope!

  P.S. you might get more visibility to a problem as it is in the sections "PXI" or "Digital i/o.  VXI and VME are not widely used these days, so this section of the forums is probably not too much traffic.

• Digital limit - several tables and 1 table limit test

  Hello!

  I am quite new to Teststand and I'm stuck with a problem whose solution should not be otherwise complex... (I think...).

  I would use a "limit test digital"vi (LabVIEW module). " This vi returns 3 paintings and I would define 1 "min/max" for each table.

  that is to say:

  Array1 => each element compared to min - 1 & max1

  Array2 => each element compared to min2 & max2

  ARRAY3 => each element compared to min3 & max3

  For 1 table, I found this solution: I write Locals.ARRAY1 [RunState.LoopIndex] 'DataSource' and all the elements of the array are compared to the limits that I chose. Of course, when I add 2 tables, the same limits are compared to these new windows but I would allocate 1 limits given in table 1.

  Does anyone have an idea of an easy solution?

  My code Teststand and the small vi are here below if this might help.

  Thank you in advance!

  Consider this example.  The trick is to repeat a measurement on the Data Source tab.

• Very slow response OR Executive Panel Test Switch

  Hello

  After you have installed the Developer Suite 2010 we have problems with the Switch Executive Virtual Device Test Panel. The problems has not been seen on old revisions.

  The Test Panel takes about 3 minutes to initialize. This only happens after that MAX was launched and the Test Panel is used the first time.

  In the attached example there is no committed material, the unit is in simulation mode.

  The same slow response happens to TestStand when you try to select the virtual device. Responses of selection after about 6 minutes, means that it takes 6 minutes for a list of all virtual devices available in MAX.

  

  I have attached the report of support of MAX, the configuration of the IVI, the export file SE virtual device and an example of TS.

  Any help on this appreciated problem.

  Thank you

  Matthias

  Hi Eric,.

  After you run the tool to remove the Corruption of database MAX Test Panel now works correctly and as expected.

  Also MAX launches much faster now than before.

  Thank you very much for your quick help and find the right solution.

  Best regards

  Matthias

• Measured values of task not aggreeing with the measurements of the test Panel

  We read (with excitement) accelerometers using modules PXI-6254. Initially, we thought that we were see shift CC and we were and we filtered. Now, if we measure the sensor output at rest with an O'scope we read uV. For even if we read the channels with MAX test panels we also read some uV. But when we do the DAQmx tasks and look at the tensions of the task to MAX (same sensors at rest), we see readings of up to 25 or 30 mV - orders of magnitude higher. Can anyone suggest what may be the cause?

  (I enclose a word with screenshots represetative doc)

  Thank you

  lmd2

  How many channels are tailor-made and at what rate?  What is the output impedance of the accelerometer or filters, you have between the accelerometers and the 6254?

  It is possible that you run into error when paying.  The specifications for the PXI-625 x cards has a chart showing the expected setting vs error track-to-track interval various sources.

  A way to test this would be to slow down your sampling rate.  If the error decreases as you slow down the sampling frequency, it's a good bet that you run into a problem of setup time.

  Mark Moss

  Electrical Validation engineer
  GHSP

• Can print control panel test pages, but cannot print from applications (Word, WP)

  Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

  Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

  Hi Doug,

  
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
  
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the printer?
  2. have you made any recent hardware or exchange of software on your computer before the show?
   

   
  Please follow the methods and mark the question below:

  Method 1:

  
  Step 1:

  Run the Microsoft Fix It from the link below.
  
  Diagnose and automatically fix problems printing and printer:
  http://support.Microsoft.com/mats/printing_problems/
  Step 2:
  
  Follow the steps in the link below.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  
  Method 2:
  
  Follow the steps in the link below.
  Find and install printer drivers in Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Method 3:
  Follow the steps in the link below.
   
  Why can I not print? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If the problem persists then I suggest to uninstall and reinstall the printer drivers.

   
   
  I hope that the information above helps you.