ORA-0043 feature disabled: partitioning under Windows Server 2003

Similar Questions

• Firewall Windows in Windows Server 2003

  Hi, I would like info.
  In the Firewall window under windows server 2003 is it possible to tell the firewall to pass a range of IP address of the local network?

  Ex: I can happen tha ranging from 192.168.0.1 to 192.168.0.5
  Is this possible?

  Sorry for my bad English.
  Good evening everyone

  These MS Answers forums are intended for the home user. It would be so better if you reposted your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.  :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Essbase 9.3.1 and Windows Server 2003 SP2

  Is anyone Essbase 9.3.1 successfully under Windows Server 2003 SP2?
  
  The documentation I have mentions only SP1, but we would like to upgrade to SP2 providing that there is no problems to do.
  
  Thank you
  
  Svejk

  There is no problem running on SP2.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Resize Partition Windows Server 2003 comments operating system operating system

  Hello

  I need to improve some of my Windows Server 2003 VMS to 2008 to take advantage of some new features, but due to constraints of size of drive when these 2003 VMs were created, they have very small OS partitions.  I can resize the disk located in the partition, but I wonder how can I resize the partition so that I'll have enough free space to upgrade in-place to Windows Server 2008.

  I don't know there is a clever trick to do this with VMWare...

  Thank you in advance.

  I also found using VMware Converter is the best solution and simpler if you have space just clone with great drive and connected with this or remove the old servers and it always works great.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• How to disable prior authentication logs on to Windows Server 2003

  Hello

  I was wondering if anyone knew a way to disable the prior authentication logs on to a Windows Server 2003 in the Event Viewer, we continue to receive many of these on our replication server that's used to be the PDC, as it is now a secondary to replicate the domain controller until we have completed the migration of all the stuff on the last domain controller. Your help would be greatly appreciated.

  Thank you very much

  RocknRollTim

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Resize the Windows Server 2003 boot partition

  My client has Server 2003 with a RAID. The system volume / start is 12 GB. Right next to this boot on the partition volume is 30 GB of unallocated space. The rest of the disk is allocated to a separate partition in which all their data lives.

  Can I expand the boot volume to include the 30 GB of unallocated space? If so, how?

  Your help is appreciated.

  Al

  Hello, Al Marion.

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• 10 GB running under LocalSystem on Windows Server 2003 account

  Hello
  
  I have an Oracle 10 G database running on Windows Server 2003 SP2. I created the database and everything works fine, while the service is running under the local system account by default. However, when I change the user that the service is running in regards to a different account of the database starts and opens and I can log on as unreserved SYS using a connection but I'm unable to open a session any other user through the listener. The listener responds to TNSpings, and everything seems OK. When I turn it on to the local system user, yet once it all works very well.
  
  Can anyone offer advice or assistance?
  
  Thank you
  Rob

  It is probably because the listener is still running under the local system account. Have you tried changing the listener service runs under the same account as the Oracle service?

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

• Windows Server 2003 (64-bit), Terminal Server has 2 mouse pointers when you connect via RDP

  I recently reinstalled one of our Terminal Server Windows Server 2003 (64-bit) servers.
  When you connect via RDP, I get 2 mouse pointers. One seems to be the pointer to the session that changes of hourglass, etc... and the pointer remains under the arrow.

  I have all the updates that are installed.
  There is no options on the RDP settings like what I use on other RDP to the other Terminal server sessions and is not on any other I RDP server on my client.

  I connected as other RDP clients and get with the same problem, is not a customer number
  Is there a setting on the server to disable this option?

  How can I remove the pointer that does not change in the session?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Satellite A200 - Installation of Windows Server 2003

  Dear Sirs,

  Recently, I bought a toshiba Laptop which has Vista Home Premium operating system. In the free space on the hard drive, I intend to install Windows Server 2003. When I insert the CD, the "install Windows Server 2003" is disabled. It does not run the application installation, and as such, I couldn't install this operating system.

  I even tried to start the insttallation put the DVD drive as a boot preference. Still it I cannot install the Windows Server 2003 operating system.

  Can someone help me in this problem. I wanted to install the Windows Server 2003 next to the Vista operating system.

  Thanks in advance.
  Rama

  > When I insert the CD, the "install Windows Server 2003" is disabled
  What do you mean by people with disabilities?

  You are not able to boot from the CD?

  In these cases, please press the C button immediately after switching on the laptop. This should allow booting from the CD/DVD drive.
  Alternatively, you can try to press the F12 key instead of the C key. This should allow the start menu. Then you could choose the STRANGE as boot device and might try to boot from the CD-ROM Server Win.

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• Drivers for Windows Server 2003 for the Satellite A500-132

  Hello

  I want to install Windows Server 2003 for my Satellite A500-132 (partitioned space).
  Anyone know where I can find the correct drivers?

  Please don't get me wrong, but you are now a joke? :)

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• Windows Server 2003 R2 vs. 2008 R2 vs. 2012 as a file server

  I use Windows Server 2003 R2. We have about 100 PCs that are connected to this server and using the network connection. We are planning to upgrade to the latest version. While I was looking for the comparison between Windows Server 2003 R2, R2 2008 and 2012.

  All items talk about new features like Hyper-V, Hyper v Replica, Active Directory, IIS etc. But I'm not using one of these. I mainly use it as a file server. So, I need to know the comparison of features related to it.

  How are the 3 versions different server?

  I heard that data deduplication is main feture of windows server 2012.Does it only reduce the file size when it is in drive? Or he gets advantage for network traffic when he copied the complete network of another way? Fact that these data are supported in windows XP in network

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)