Power vs. temperature curve

Similar Questions

• Change of units on the temperature curve

  What is the best way to change the units from C to F and back on the graph showing the temperature / time?

  I recommend to make a deal with a Boolean control structure to switch the case.  "" "" "Property node in the case, nationwide signal degC to degF, and also have a property for the graph node by right-clicking on the chart" create "" Y-Scale ' name label "text and change the text to ° c or DegF accordingly.

  Best,

• RD640 - Easy management, WMI namespace and classes of voltage, power supply, temperature and related areas

  I try to use WMI to access the material on RD640, like the easy way to manage information.

  Is this possible? If so if there any WMI information (names/classes/properties space) which is available? Or if WMI is not supported so is there another propertariy API?

  How Easy managing access the statues and RD640 material information?

  Thank you

  BKAO

  Hello bkao,

  Unfortunately the use of WMI is not a supported method. However, you can use IPMI calls for information. In my view, that is how it is easy gale gathers information (using IPMI calls).

• Cannot upgrade HP pavilion Elite e9180f power?

  So I just got the computer (second hand). I bought a corsair HX650 and a NVIDIA GTX560TI. It's that the motherboard (motherboard IPMTB-TK Truckee) gets no power. I've updated the settng bios and still no power. I know that food works (already exchanged once) and the graphics card is fine. Is this a known issue? Any suggestions on a fix?

  Sam,

  Another way to understand:

  Your system has a 460W PSU and a GTS250 graphics card. The GTS draws 145W, the new map is 170W.  Now, your only addition 25W max. That's why you only need a slight update. Rosewill 530W would suffice, but I like to use the 630W for the power at a low temperature curve.

  Thanks to Dave_G for making the point on the power on the map.

• SPM30 high temperature

  Hi all,
  I have a problem? with my laptop SPM30.
  When it is on and connected to the power, the temperature rise to uncomfortable levels (without equal treatment no matter what). The cones normally on both fan.
  The temperature reached
  below: 55 oC
  palmrest 45 oC
  (room temperature 24 oC)

  This seems to be normal, because it is rather uncomfortable to work with.

  Thank you
  Demos of SA

  Hi demos

  How you been able to measure exact temperature part is based?
  It is very strange but hand rests on my machine is also hot, but I can't say what unconfortable to work.

  If you think that it really is to warm up the best solution is to contact the Service partner. They allow to check the laptop.

• Portege M400 - high CPU temperature

  Hello

  I'm having a problem with the temperature of the CPU in my M400 (Vista OS). When I have the computer power, initial temperature is 35 ° C, but after about 15 minutes of work, he climbs to 60 ° C and remained there.

  Reached last night 80 c and I was really interested. I tried anything to upgrade the BIOS (v3.6) to change power options in Vista.

  I don't know if it's really funny, but a few days ago, I placed a package of chocolate alongside the cooler (about 10 cm) and after 5 minutes I noticed, that it started to melt. :(

  Help, please! Any suggestion is welcome!

  Kind regards
  Jovan

  > I'm having a problem with the temperature of the CPU in my M400 (Vista OS). When I have the computer power, initial temperature is 35 ° C, but after about 15 minutes of work, he climbs to 60 ° C and remained there.
  60 c are nothing unusual. My CPU temperature going up to 70 - 90 c to play or watch DVDs.

  Your laptop computer shut down automatically? If this isn't the case, then you should t be worried.
  The notebooks are supported protection against overheating. If the laptop could overheat then the laptop would be closed automatically to prevent the equipment from damage.

  On the other hand, it would be interesting to know if your cooling modules can run wit a maximum return. Sometimes, the fans are blocked and cannot cool the CPU and the GPU.

  From time to time, I clean my fans to make sure that the coolant is good enough.

  Maybe you should clean the fans too.

  Good bye

• Satellite A200-WOO overheating - hight temp

  Hello

  I bought my computer in Australia. A model Toshiba A200 WOO, 2.2 GHz, 2 GB Ram and Core Duo and for the last few months, I noticed the laptop gets very hot. At some point, I put on low power when it's plugged in because it overheating randomly and just stops.

  But even at low power, the temperature will be about 85 degrees. Now, as I it comes have type that my hands are very hot to rest on the laptop and the touchpad is is as a heating unit. The fan never sleeps and I use the fan speed to monitor the temperature and the temperature is currently on Core 0 93 and 94 degrees on Core 2 and Im only running Mozilla Firefox, Notepad, Speedfan, and Windows Media Player.

  I read that the radiator is probably dust in there but my warranty is valid till if I really don't want to invalidate opening upward... I'M not sure if that is the cause, or is this something else. I always keep my own machine and its always in my room or in its coverage I don't see how he could collect the dust so. When I start a game after about 10 minutes, it gets really hot and turns off. When I feel the underside it literally burns and stickers are peeling.

  Any suggestion would be appreciated.

  Thank you

  Hi Mezzi

  Yes, the clogged cooling fans and bad air circulation could cause this high temperature and could lead to a point where the laptop would be closed automatically to prevent the equipment from damage.

  You should also know that all internal devices would go with optimal performance while playing a game and because of the dissipation of heat, the temperature would arise at a critical level.

  Therefore, it is really important to make sure that the vents are free and not blocked by dust and other objects...

  Anyway, you said that your warranty is still valid, and that's why I strongly recommend contacting ASP (certified partner) guys in your country and explain your mobile number.
  I'm sure that the technician can help you!

  Good luck and best wishes mate.

• Tiara special plot

  Hello

  I have 2 data in Labview, we're a couple time and Temperatura x time x. I want to put this in a report in a way I'm havo two pieces of information in the same chart, but without going through the plot. My idea is to make the bones of color temperature curve x acodding time change to the value of the couple at the same time. So when the torque curve will be red and when the couple is low the curve will be gree, and between the maximum and minimum values, I have a range of colours...

  What is an easy way to do it?

  Thnx

  Hi Marcus,

  You must double-click the 3D graph and check the legend box in the lower left corner of the dialog box to display the legend.  After that, you can click on the 'Settings' button to the right of the "Legend" box to change the appearance of the legend.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Arduino serial

  Hi all

  drog says:

  ----------------------------------------------------------------------------------

  My Arduino sends continuous readings of temperature of the room as part of a text string and I wrote a VI to set the text buffer, extracted temporary numbers, display value and the data graphic. ?

  -----------------------------------------------------------------------------

  I used you are vi and able to implement visa configuration, and able to read the values (in the part of the cancatenated chain). Just check the attached jpeg format.

  I also enclose arduino sketch. I don't get the temperature curve and the values in table of temperature...

  The description of the vi ie; TempMon2.vi?  says:

  --------------------------------------------------------------------------------------------------------------------------

  This program is designed to work with the March 2009 version of the Arduino temperature program that sends a header, the gross value of A/D and the temperature in the integer value. ?

  ----------------------------------------------------------------------------------------------------------------------------

  Just explain what is heading?

  How to send a record of temperature in a text string?

  I am grateful, if you send the program arduino?

  (I am fighting for the result of almost a month)

  Thank you

  Your problem is in the LabVIEW VI in the VI TempMon2.vi, have you changed the first boss of the game (which is labeled as "Search for reading temp that contains the text-model") to match?

  \r\n[0-9]+\. [0-9] + \r\n\r\nA

  JohnCS

• Get the current index value of the table control

  I have a table control 1 d on a panel that contains a value of temperature curve that I send to a temperature controller. The values in the table are not unique, because for example 40.5 degrees in the table could represent 40.5 degrees on the cycles of cooling or heating. I could have severat heating/cooling cycles programmed into the table. I would like a way to read the array index of the currently displayed item in the array in the up/down control of index on the left of the table control. I could then run curves partial temperature easily by neutrophilia a starting point on the curve in the table control.

  I don't see a property that I can use to get this index value. Anyone have any ideas?

  Thank you

  J

  Use the property 'index values. It will be the first item of the output of a 1-d array.

• Linear adjustment does not not with NaN

  Hi guys.

  I try to use that a good linear in fact the best solution for the acquisition of temperature, but when acquiring, I acquire NaN data.

  I can trace the temperature curve, but I can't draw or soma receivo of linear adjustment data.

  My code is below, in LV2010.

  Can someone help me?

  "" "You're almost there. '" Remember that you must also delete the values to keep the two tables of entry of the same length X and aligned. Simply the table to process the X in the same loop using the same structure of matter, just using a second team to register.

• Conflict between the Intel HD Graphics driver and controller SMBus Intel code 12

  I have a copy of Windows 7 and for some reason, these 2 drivers are in conflict.

  Intel HD Graphics (8.15.12.2622) and Intel (r) 5 Series/3400 Series Chipset Family SMBus Controller - 3B 30 (6.1.7600.16385)

  And the Intel HD Graphics Wont run... (Code 12) that gives me problems because I can't use my graphics card.

  Are things that I need to know.

  Many of these drivers can be disabled safely.

  And that was more important for the system working properly

  If I can get these questions quickly, it would be perfect... Thank you

  Hello Michael,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  SMBus is the System Management Bus used in personal computers and servers at low speed, system management communications. SMBus controller is integrated into most Intel chipsets and SMBus controller driver is one of the chipset drivers. He keeps a check on the power of temperature and voltage. In addition, it communicates with the power supply on your PC.

  Graphics driver is important to better display Windows. Without it, the resolution of the screen becomes very low.

  These devices may conflict when they were assigned same ports of entry/exit (e/s), the same interrupt, or the same Direct access channel in memory. The assignment was made by the basic input/output system (BIOS), the operating system, or a combination of both.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the material as the mouse (USB), keyboards and other devices that are not detected by the Manager of devices or when they do not work.

  Additional information:
  Code 12: This device cannot find enough free resources that it can use
  https://TechNet.Microsoft.com/en-us/library/cc732199%28V=WS.10%29.aspx?f=255&MSPPError=-2147217396
  (Also valid for Windows 7)

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP envy 17-1011nr ssd upgrade broke boot

  Has problems from the heat with my HP Envy 17-1011NR.  I replaced the thermal paste to the heatsink with Arctic Silver 5 and I got a relief of the stops that I had to follow closely to cook them.  I slowed down the clock and I was now running quite hot and rather very hot.  I was also running quite slow.  I tried a can of air compressed on the fins of the heat (sprayed into the vents) and that helped a lot (fast, cheap and efficient).  I can now run quite hot full clock speed with an occasional burst of tablets to empty the dust (it wasn't clear the dust bunnies inside but it makes a big difference).  Finally, I decided to see if I could still lower power and temperature while increasing speeds and prolongs the useful life using SSDS.

  I bought two Samsung 840 Pro 512 GB drives.  Given that HP has a distribution not supported by Samsung disk copy, I used Clonezilla instead.  I chose the advanced option to extend partitions proportionally so that the disc can be consumed without creating more partitions. The SSD was mounted via a USB adapter. With projects out me to work, I returned home tired to run the next steps in cloning and go to bed. Wake up and do a little more and finish in the next few days.  Serious mistake.

  When hard drives were copied, I shutdown and replace them with the SSD and started.  No operating system found.  Then I handed the hard drives and booted.  No operating system is found.  Never had a problem with Clonezilla before (but I was generally cool when you use).  Using the USB adapter I checked the hard drives and SSD on another system and they were very good, then the copied data and the partition table is good; I can't just start readers.  I suspect that Windows 7 is good, except to get started.  I have this whole system label and Clonezilla gave me the serial numbers that I wrote it down at the time when the readers would not mix between primary (boot) and secondary (not bootable). But of course something is not so everything is suspect until proven otherwise.

  So now I want to know what is the recommended method for moving forward, risking the least amount of content in the car.  What is the recommended sequence of tools to try and damage each will make to the contents of the disc?  I would actually get running on the SSD, but it is usually easier to solve a problem at a time.

  All HDD and SSD problems solved.  (1) removed SSD drives and reinstalled two HARD disk drives.  (2) started repair disc (DVD), I've created many many moons ago.  Removed the ERD and restarted.  HARD drive works.  (3) judgment, secondary secondary HDD and SSD.  Started and the driver has been installed automatically.  (4) stop, primary primary HDD and SSD.  Started from the new ERD.  Removed the ERD and restarted.  Œuvres of the SDS.  Now running on the the two SSD drives.

  The heat is lower, the speed is faster (boot is incredibly fast), more disk space and wait this will prolong the life of this computer by years.  Also, will not have to buy new software for a new computer for a while so the upgrade is very useful.  To give you an idea of the speed, I run treesize on drive C (151 GB used) which took about 2 minutes, but on the SSD with the same data, it took 14 seconds.  TreeSize is a tool to question the use of the disc by tree and is recommended if you want to know quickly where your disk space has gone.

• Two remote AnyConnect clients cannot get two voice via softphones?

  We have a situation where two remote users of SSL VPNS cannot establish a voice call via softphones or cookie lync. They can both talk but I can't hear the other. Each user can call external or the office LAN without problems.

  I'm under ASA version 9.1 (5) and v.3.1.05170 AnyConnect. Pretty basic config (purified) - any help would be appreciated!

  # sh run
  : Saved
  :
  ASA Version 9.1 (5)
  !
  host device name
  something.com domain name
  activate the encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  encrypted passwd
  names of
  General pool of local pool IP 10.x.x.x - 10.x.x.y
  IP local pool pool-ops-TI 10.y.y.y - 10.y.y.z

  interface GigabitEthernet0/0
  nameif outside
  security-level 0
  IP x.x.x.x where x.x.x.x
  !
  interface GigabitEthernet0/1
  description of the inside interface
  nameif inside
  security-level 100
  IP address y.y.y.y y.y.y.y
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/6
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/7
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  banner login ***********************************************************************
  connection of the banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  connection of the banner is a computer network that is private and can be used only in direct
  banner connection explicit owner. The owner reserves the right to
  banner connection monitor use this network to ensure the security of networks and respond
  banner connect on specific allegations of misuse. Use of this network must
  the banner sign a consent to the monitoring of these or other purposes.
  connection banner in addition, the owner reserves the right to consent to a valid
  application of law banner connection to search the network for evidence of a crime
  banner stored within the network connection.
  banner login ***********************************************************************
  banner asdm ***********************************************************************
  asdm banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  asdm banner is a computer network that is private and can be used only in direct
  banner asdm explicit owner. The owner reserves the right to
  banner asdm monitor use this network to ensure the security of networks and respond
  asdm banner of specific allegations of misuse. Use of this network must
  banner asdm you consent to the monitoring of these or other purposes.
  asdm banner in addition, the owner reserves the right to consent to a valid
  application of law banner asdm to search the network for evidence of a crime
  asdm banner stored within the network.
  banner asdm ***********************************************************************
  boot system Disk0: / asa915-smp - k8.bin
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT 1 Sun Mar 1 Sun Nov 02:00 02:00
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 192.168.0.0
  Server name 192.168.0.0
  something.com domain name
  Local_LAN_Access list standard access allowed host 0.0.0.0
  pager lines 24
  Enable logging
  timestamp of the record
  exploitation forest-size of the buffer 40960
  logging buffered stored notifications
  logging trap notifications
  record of the mistakes of history
  notifications of logging asdm
  logging - the id of the device hostname
  logging inside 10.0.0.0 host
  logging inside 10.0.0.0 host
  Outside 1500 MTU
  Within 1500 MTU
  IP verify reverse path to the outside interface
  IP verify reverse path inside interface
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any echo outdoors
  ICMP allow any inaccessible outside
  ICMP allow any inside
  ASDM image disk0: / asdm - 721.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
  Route inside 10.0.0.0 255.0.0.0 y.y.y.y 1
  Route inside 192.168.0.0 255.255.0.0 y.y.y.y 1
  Route inside 0.0.0.0 0.0.0.0 y.y.y.y in tunnel
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  test_VPN card-attribute LDAP
  name of the memberOf Group Policy map
  map-value memberOf "CN = test VPN, OR = groups of VPN, OR = Groups, OU = company, DC =, DC =, DC = com" "test VPN".
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server test-deviceauth protocol ldap
  Max - a attempts failed 5
  AAA-server baird-deviceauth (inside) host 192.x.x.x
  Server-port 636
  LDAP-base-dn DC = x, DC =, DC = z
  LDAP-scope subtree
  LDAP-login-password
  LDAP-connection-dn cn = b, OU = Service accounts, DC = x, DC =, DC = z
  enable LDAP over ssl
  microsoft server type
  AAA-server test-rsa Protocol sdi
  AAA-server test-rsa (inside) host
  interval before attempt-3 new
  AAA-server auth-ldap-tes ldap Protocol
  AAA-server test-ldap-auth (inside) host
  Server-port 636
  LDAP-base-dn DC = country, DC = a, DC = com
  LDAP-scope subtree
  LDAP-login-password
  LDAP-connection-dn CN = b, OU = Service accounts, DC = x, DC =, DC = z
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map test_VPN
  identity of the user by default-domain LOCAL
  the ssh LOCAL of baird-deviceauth console AAA authentication
  HTTP authentication AAA console LOCAL baird-deviceauth
  serial baird-deviceauth LOCAL console AAA authentication
  Enable http server
  http inside x.x.x.x y.y.y.y
  HTTP 1.1.1.1 255.255.255.0 inside
  redirect http outside 80
  SNMP-server host inside x.x.x.x trap community version 2 c
  SNMP server location
  contact SNMP Server
  SNMP-server community
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Server enable SNMP traps entity power cpu-temperature
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint trustpoint-selfsigned-vpncso
  registration auto
  FQDN
  name of the object CN =, O =, C =, St =, =.
  key pair
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  FQDN
  name of the object CN = OR =, O =, C = St =, =.
  key pair
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  trustpool crypto ca policy

  Telnet timeout 5
  SSH enable ibou
  SSH stricthostkeycheck
  x.x.x.x inside SSH
  SSH timeout 30
  SSH version 2
  SSH group dh-Group1-sha1 key exchange
  Console timeout 15
  No vpn-addr-assign aaa
  No dhcp vpn-addr-assign
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign
  no statistical access list - a threat detection
  no statistical threat detection tcp-interception
  NTP server 1.1.1.1 source inside
  NTP server 2.2.2.2 source inside
  SSL-trust outside ASDM_TrustPoint0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 2
  AnyConnect profiles baird-client-profile disk0: / customer-baird - profile .xml
  AnyConnect enable
  attributes of Group Policy DfltGrpPolicy
  value of banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  value of banner is a computer network that is private and can be used only in direct
  banner value explicit owner. The owner reserves the right to
  banner value monitor use this network to ensure the security of networks and respond
  the value of the banner of the specific allegations of misuse. Use of this network must
  value of the banner a consent to the monitoring of these or other purposes.
  value of server DNS 1.1.1.1 2.2.2.2
  VPN - connections 2
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Local_LAN_Access
  something.com value by default-field
  Split-dns value something.com, us.something.com
  activate dns split-tunnel-all
  the address value general-pool pools
  WebVPN
  use-smart-tunnel homepage
  AnyConnect value dart modules, nam
  AnyConnect value profiles baird-client-profile user type
  AnyConnect ask flawless anyconnect
  Group Policy 'test' internal
  Group Policy attributes 'test '.
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Local_LAN_Access
  activate dns split-tunnel-all
  the address value it-ops-pool pools
  internal testMacs group policy
  attributes of the strategy of group testMacs
  WINS server no
  value of server DNS 1.1.1.1 2.2.2.2
  client ssl-VPN-tunnel-Protocol
  field default value xyz.com
  username admin privilege 15 encrypted password
  attributes global-tunnel-group DefaultRAGroup
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group DefaultRAGroup webvpn-attributes
  the aaa authentication certificate
  attributes global-tunnel-group DefaultWEBVPNGroup
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group DefaultWEBVPNGroup webvpn-attributes
  the aaa authentication certificate
  tunnel-group test remote access connection type
  tunnel-group test-Connect General attributes
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group test connection webvpn-attributes
  the aaa authentication certificate
  allow group-url http://abc.xyz.com
  allow group-url https://abc.xyz.rwbaird.com
  type tunnel-group testMacs remote access
  tunnel-group testMacs General-attributes
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  Group Policy - by default-testMacs
  management of the password password-expire-to-days 10
  use-set-name of the secondary-username-of-certificate
  tunnel-group testMacs webvpn-attributes
  allow group-url http://abc.xyz.com/macs
  allow group-url https://abc.xyz.com/macs
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory 26
  Subscribe to alert-group configuration periodic monthly 26
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:aa675139dc84529791f9aaba46eb17f9
  : end

  I confess that I have not read your config in detail, but a few tips:

  -If you do split tunnel, don't forget to push a route for the entire pool VPN subnet or subnets of VPN clients

  -Make sure you have the same-security-traffic permitted intra-interface

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa81/command/ref/refg...

  -If you use NAT, you must exclude such NAT inter-VPN-device traffic

  -If you have ACLs (not shown) do not forget to leave your pool VPN subnet is talking to himself.  Generally, it would be in the ACL entering the external interface.

  at the end of the packet - trace is your friend.

  NGP

• View the status of the P400i on a DL360 G5

  Hello

  I installed ESXi 4.1 on the server above.

  In the vSphere Client, I can see the fan status, power and temperatures.

  But I do not see the status of the server P400i controller raid array.

  Should I install some agents? And where can I download it?

  Thank you.

  Welcome to the community,

  You can either install the distribution HP ESXi or the last HP ESXi offline Bundle for VMware ESXi 4.1 if you have installed the 'original' version of VMware.

  André