ORA-01086: registration point "BO_SP" ever created

Similar Questions

• ORA-01086 - point error using Text_io registration in Oracle Forms

  Hi all
  
  I'm developing a simple form where I make a copy of a file on a Linux server to another file using the text_io.
  
  I know that the simple is to use the host command and the cp command, but my real goal is to find specific text in the file and replace the same.
  
  The logic to use was to read each line of the source file, copy the line to a new file and also analyze the line for the text if the text to be replaced is found, replace the text in the line and then add the line changed in the new file. Once the new file is complete, then delete the source file and rename the target to the source file name.
  
  In this logic, I was able to achieve the goal, however, I'm not able to generate the target file complete as that of the source.
  
  When I execute the form, I always get error ORA-01403 and my target file is not complete.
  
  Under debugging, I tried to make a copy of a Source file that is to have 100,000 lines in a file target on the server using the program below without any logic to find and replace. I still have the same error as above, and the target file on the server was only 99 333 lines.
  
  
  declare
  
  l_fil text_io.file_type;
  l_filnew text_io.file_type;
  l_str varchar2 (2000);
  l_errmsg varchar2 (2000);
  
  Start
  
  If text_io.is_open (l_fil) then
  TEXT_IO.fclose (l_fil);
  end if;
  
  If text_io.is_open (l_filnew) then
  TEXT_IO.fclose (l_filnew);
  end if;
  
  l_fil: = text_io.fopen('/tmp/rats3.txt','r');
  
  l_filnew: = text_io.fopen('/tmp/rats5.txt','w');
  
  loop
  TEXT_IO.get_line (l_fil, l_str);
  TEXT_IO.put_line (l_filnew, l_str);
  end loop;
  
  
  TEXT_IO.fclose (l_fil);
  
  TEXT_IO.fclose (l_filnew);
  
  message ("success"); break;
  
  exception
  while others then
  l_errmsg: = sqlerrm;
  message (substr (l_errmsg, 1, 255)); pause;
  end;
  
  Using this debugging with exception handling, this time I met an additional error with ORA-01403. ORA-01086 i.e.: Savepoint 'FM_1' has never been established.
  
  Can anyone help in this regard. I would sincerely.
  
  Thanking you,

  You aren't the exception NO_DATA_FOUND that ctaching the TEXT_IO. GET_LINE fires if there is no more data in the file. That's why you get the ORa-01403. Your loop should be something like

  LOOP
    BEGIN
      TEXT_IO.GET_LINE(...);
      do some stuff with the data
    EXCEPTION
      WHEN NO_Data_FOUND THEN
        EXIT;
    END;
  END LOOP;
  

  Published by: Andreas Weiden on 01.04.2012 19:06

• Upon resuming from hibernation my computer asks continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use?

  Original title: F8 and troubleshooting.

  After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.

  Recently, I had this problem.  This link above (http://support.microsoft.com/kb/294427) helped me.

  Basically, it seems to be a corrupted restore point created to go into hibernation.  I think that the system wants to remove that restore point and reboot "fresh."

  Restore data refers to a previous restoration or a restore point that was created for later use?

  
  

  A previous restore point.

  If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  
  

  If I understand you correctly, no.

  Hope this helps

  -Rich

• How to change the dynamic registration point or rotate any DisplayObject by its Center?

  The Rotations3DUtility is written by myselft for any DisplayObject to rotate in its horizontal center, but the effect is not perfect, can someone tell me how to do this?

  Thank you!

  package com.howall.utility

  {

  import flash.display.DisplayObject;

  import flash.events.Event;

  import flash.events.TimerEvent;

  import flash.utils.Timer;

  public class Rotation3DUtility

       {

  Public static const FIRST_END:String = "firstEnd";

  public static const END: String = "end";

  private static var: timer;

  time1:Number private static var;

  time2:Number private static var;

  fontRotation:Boolean private static var;

  private static var target: DisplayObject;

  private static var int count = 10;

  public static rotationByY(t:DisplayObject,_t1:Number,_t2:Number):void

            {

  timer = new timer (t1, count);

                 target = t;

                 time1 = t1;

                 time2 = t2;

  timer.addEventListener (TimerEvent.TIMER, onTimer);

  timer.addEventListener (TimerEvent.TIMER_COMPLETE, timerEnd);

  timer.start ();

            }

  private static onTimer(event:TimerEvent):void {}

  if (target.rotationY! = - 108) {}

  {if(!fontRotation)}

  target.rotationY += 72/count;

  target.x += target.width/count * 2;

                      } else {}

  target.rotationY += 108/count;

  target.x = target.width/count * 2;

                      }

                 } else {}

  fontRotation = true;

  target.rotationY += 108/count;

  target.x = target.width/count * 2;                    

                 }

            }

  private static timerEnd(event:TimerEvent):void {}

  if (Math.round (target.rotationY) == 72) {}

  target.rotationY = - 108;

  timer.repeatCount = 10;

  timer.delay = 2;

  timer.reset ();

  timer.start ();

  target.dispatchEvent (new Event (FIRST_END));

                 } else {}

  target.rotationY = 0;

  fontRotation = false;

  timer.stop ();

  timer.removeEventListener (TimerEvent.TIMER, onTimer);

  timer.removeEventListener (TimerEvent.TIMER_COMPLETE, timerEnd);          

  timer = null;

  target.dispatchEvent (new Event (END));

  target = null;

                 }

            }

       }

  }

  We can change the registration point of

  1. change the position of the content of the display of the object (using the getChildAt() method).

  2. with the help of matrix operations (method of transformation point).

  [For the first example is attached]

  You can also use matrix operations to transform any display object

  The transformations of thease include:

  Translation (change in position of the display object).

  1. Rotation (rotation of the object at an angle of view)
  2. Tilt (by changing the inclination of the display object)
  3. Scale (change of height and width of the display object)

  For more information read the help on the Matrix class.

• Cannot change the registration point

  I am creating a preloader type needle gauge and I created the needle and it's a MC and set point alignment in the Middle at the bottom, but it is still running on a center axis.

  Any help?

  This is the tutorial I'm following:

  http://active.tutsplus.com/tutorials/ActionScript/Display-Data-with-funky-Animated-Needle-/ gauges

  Open your movieclip to edit and manually move the chart of the needle, so that the line of sight of registration where you want.

• Error: "no restore points could be created for an unknown reason."

  original title: inoperable. Windows Vista system restore

  My system recovery, restore cannot create any requested restore point after that execution and by completing the order followed with pop - up box describing that no restore point could not be created for some unknown reason.  Help, please!

  Hello

  1. you are making a system image backup or you try to run the system recovery options system restore?

  2 are you try to create a restore point manually?

  3. at what stage you receive the error message?

• Impdp ORA-39083 error: INDEX could not create with object type error:

  Hi Experts,

  I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs

  
  

  I did export with this command.

  patterns of HR/hr = hr = TEST_DIR dumpfile = HR.dmp logfile directory expdp = expdpHR.log statistics = none

  that the user HR with the option drop waterfall.

  
  

  And try to import it HR schemas in the database by the following.

  Impdp System/Manager schemas = hr = TEST_DIR dumpfile = HR.dmp logfile directory = expdpHR.log statistics = none

  Here is the error

  imported 'HR '. "" PQH_SS_PRINT_DATA "0 KB 0 rows

  ... imdoor 'HR '. "" PQH_TJR_SHADOW "0 KB 0 rows

  . . imported 'HR '. "" PQH_TXN_JOB_REQUIREMENTS "0 KB 0 rows

  . . imported 'HR '. "" PQH_WORKSHEET_BUDGET_SETS_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQH_WORKSHEET_DETAILS_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQH_WORKSHEET_PERIODS_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_ALIEN_TRANSACTION_DATA "0 KB 0 rows

  . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DATA "0 KB 0 rows

  . . imported 'HR '. "" PQP_ANALYZED_ALIEN_DETAILS "0 KB 0 rows

  . . imported 'HR '. "" PQP_EXCEPTION_REPORTS_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_EXT_CROSS_PERSON_RECORDS "0 KB 0 rows

  . . imported 'HR '. "" PQP_FLXDU_FUNC_ATTRIBUTES "0 KB 0 rows

  . . imported 'HR '. "" PQP_FLXDU_XML_TAGS "0 KB 0 rows

  . . imported 'HR '. "" PQP_GAP_DURATION_SUMMARY "0 KB 0 rows

  . . imported 'HR '. "" PQP_PENSION_TYPES_F_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_SERVICE_HISTORY_PERIODS "0 KB 0 rows

  . . imported 'HR '. "" PQP_VEHICLE_ALLOCATIONS_F_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_VEHICLE_DETAILS_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_VEHICLE_REPOSITORY_F_EFC "0 KB 0 rows

  . . imported 'HR '. "" PQP_VEH_ALLOC_EXTRA_INFO "0 KB 0 rows

  . . imported 'HR '. "" PQP_VEH_REPOS_EXTRA_INFO "0 KB 0 rows

  Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

  Processing object type SCHEMA_EXPORT/TABLE/SCHOLARSHIP/CROSS_SCHEMA/OBJECT_GRANT

  Object type SCHEMA_EXPORT/TABLE/COMMENT of treatment

  Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC of treatment

  Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC

  Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX

  Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX

  Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment

  Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment

  Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS

  Object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY of treatment

  Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT of treatment

  Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment

  Processing object type SCHEMA_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX

  ORA-39083: Type what INDEX failed to create object error:

  ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE

  ORA-20000: Oracle text error:

  DRG-50857: error oracle in drvxtab.create_index_tables

  ORA-00959: tablespace "APPS_TS_TX_IDX_NEW" does not exist

  Because sql is:

  CREATE INDEXES ' HR'.»» IRC_POSTING_CON_TL_CTX' ON 'HR '. "" INDEXTYPE IRC_POSTING_CONTENTS_TL "("NAME") IS"CTXSYS. "' CONTEXT ' PARALLEL 1

  Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA

  Work 'SYSTEM '. "" SYS_IMPORT_SCHEMA_01 "completed with error (s 1) at 11:16:07

  SQL > select count (parameter), object_type from dba_objects where owner = 'HR' group by object_type.

  OBJECT_TYPE COUNT (OBJECT_NAME)

  ------------------ -------------------

  INDEX 37 PARTITION

  SEQUENCE OF 799

  TABLE 12 PARTITION

  LOB 70

  4 BODY PACKAGE

  PACKAGE OF 4

  3 RELAXATION

  2936 INDEX

  TABLE OF 1306

  Could you please suggest.

  Thank you

  MZ

  MZ,

  I get the following error when importing schema HR after a fall it. The DB is r12.1.3 11.2.0.3 & ebs

  
  

  Export and import of individual patterns of Oracle E-Business Suite stocked are not supported as this will violate referential integrity (except for custom schemas provided, you have no dependencies).

  Thank you

  Hussein

• Table exists but still error: ORA-00942, isn't able to create indexes: Help

  It's my script... the table FLASH_SALES_BY_STORE_AND_HOUR exist in my database, so why I get the error message.
  ERROR on line 1:
  ORA-00942: table or view does not exist
  
  
  
  Here is my script.
  
  ASK for IDX_SALES_STORE_DEL
  
  CREATE INDEX IDX_SALES_STORE_DEL ON FLASH_SALES_BY_STORE_AND_HOUR (STORE_ID, TRUNC (LOCAL_DATE))
  TABLESPACE 'FLASH '.
  STORAGE
  (
  DEFAULT USER_TABLES
  )
  /
  
  QUICK creation IDX_SALES_STORE_VIEWexit
  
  
  CREATE INDEX IDX_SALES_STORE_VIEW ON FLASH_SALES_BY_STORE_AND_HOUR (STORE_ID, TRUNC (LOCAL_DATE), DEPARTMENT)
  TABLESPACE 'FLASH '.
  STORAGE
  (
  DEFAULT USER_TABLES
  )
  /

  Please, re - run the script as the user who owns the table...

  Otherwise, add the schema name before the name of the index (if not index will be created under SYS) and table name (since you missed the creation of synonym).

  HTH,
  Thierry

• ORA-01031: no sufficient privileges, while creating a FK

  I loged as sys and follow up on command, I am getting ORA-01031 error, how can I solve this
  

  ALTER TABLE CORE_BUSINESS.CB_PEN_ACCOUNT_INFO ADD 
   FOREIGN KEY (PEN_AWARD_REGION)
   REFERENCES GENERAL_INFORMATION.CB_REGION_FO (REGION_FO_CODE)
   ENABLE
   VALIDATE

  You need the GENERAL_INFORMATION user to grant the privilege of REFERENCES on table CB_REGION_FO to user CORE_BUSINESS:

   grant references on CB_REGION_FO to CORE_BUSINESS;
  

  Here is an example where u1 = GENERAL_INFORMATION and u2 = CORE_BUSINESS

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
  PL/SQL Release 10.2.0.1.0 - Production
  CORE    10.2.0.1.0      Production
  TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  SQL> create user u1 identified by u1;
  
  User created.
  
  SQL> grant create session, create table, unlimited tablespace to u1;
  
  Grant succeeded.
  
  SQL> create user u2 identified by u2;
  
  User created.
  
  SQL> grant create session, create table, unlimited tablespace to u2;
  
  Grant succeeded.
  
  SQL> connect u1/u1
  Connected.
  SQL> create table p(px int primary key);
  
  Table created.
  
  SQL> grant references on p to u2;
  
  Grant succeeded.
  
  SQL> connect u2/u2
  Connected.
  SQL> create table c(cx int primary key, y int);
  
  Table created.
  
  SQL> connect / as sysdba
  Connected.
  SQL> show user
  USER is "SYS"
  SQL> alter table u2.c
    2  add foreign key (y)
    3  references u1.p(px)
    4  enable
    5  validate;
  
  Table altered.
  

  Edited by: P. Forstmann on 15 Jan. 2011 10:12

  Edited by: P. Forstmann on 15 Jan. 2011 10:13

• Upper left registration point to the center of conversion (2D to 3D)

  Hello again

  I'm a 3D room Builder. The user places around the scene 2D Sprites and my script converts these Sprites Papervision3D DisplayObject3D objects. I have problems with the positioning of 3D object because the Sprites have their upper left registration centres and 3D objects have registration centres at their Center. How can I do this conversion?

  Here is a diagram of the operation between the 2 different coordinate systems:

  

  I tried this code:

  child3D.x = child2D.x;

  child3D.z = child2D.y - child2D.y - child2D.y; just to make it negative

  Objects in the 2D scene are separated from 10 pixels for example. They must be spaced 10 pixels in the 3D scene, but they are not

  

  According to your description, there will be no problem.

  According to your chart, there are translation of one or the two objects so points (along the x-axis) who were out in 2d 50 pixels are separated in 3d and the points that have been 100pixels (along the y-axis 2d) 25 pixels are 50pixels (along the z-axis of 3d).

• Inventory point settings to create ISO planned order

  I have several manufacturing companies, but some items are made exclusively to an individual.  When the request is created in one of ent sale that makes the question, I want an ISO to be created to transfer the product from the production org in the org of sale.  What settings should I for MRP/ASIC create an ISO when I release a planned order?  Make or buy = buy?, Sourcing all of 'transfer' Mfg org?

  Hello, Jessica,.

  According to the pre-required configurations necessary for your requirment

  • -Set items as brand elements,
  • -To define their Nomenclature and the itinerary changes
  • -Defined rule sourcing and assign it to all the assignment, associate this assignment set to the CPSA plan in plan options (transfer back and forth MFG organization)

  Kind regards

  Surya Nagarjuna

• Slideshow navigation points - how add/create them?

  Can someone advise me on how to include navigation on a slide show widget points.

  A similar thread here that should answer your query.

  http://forums.Adobe.com/message/5117369

  Thank you

  Vinayak

• Can we add point form, form create shaped with the report Option.

  Hello
  
  I created the Page report form.
  Now, I want to add an article on the form as Textfield.
  is it possible, thanks to delete the page, can add us the article into shape.
  If Yes, how can I do.
  
  Thanks

  Yes,

  Just go to the page of the form, add a page element to the region where all elements of the online form and follow the steps. When you get to the source, set type database column and the value of the source as column name.

  Van
  Trent

• registration point of uiLoader?

  Hello

  I'm dynamically load a large image in a uiLoader component. And by using the following lines:

  .

  .

  .

  stage.addEventListener (Event.ENTER_FRAME, followFrame);
  function followFrame(event:Event):void {}

  var dx:int = myUILoader.x + mouseX;
  myUILoader.x = dx / 10;
  var dx1:int = myUILoader.y + mouseY;
  myUILoader.y = dx1 / 10;

  .

  .

  .

  I managed to make the image by following the mouse very well. But the image still off center, like the ponit of the uiLoader registration would be the left size, even if I try to align the center of the scene by:

  myUILoader.x = (myUILoader.stage.stageWidth / 2)-(myUILoader.width / 2);
  myUILoader.y = (myUILoader.stage.stageHeight / 2)-(myUILoader.height / 2);

  Can someone light for me please? !!

  Kind regards

  Simply enter the half the width and height of the UILoader in your calculations.

  var dx:int = (myUILoader.x - (myUILoader.width / 2)) + mouseX;
  myUILoader.x -= dx / 10;
  var dx1:int = (myUILoader.y - (myUILoader.height / 2)) + mouseY;
  myUILoader.y -= dx1 / 10;
  

• change the registration point: no simple way that WORKS!

  I read a few threads on changing the point of alignment on a movieclip but does not seem to work.

  I have a movieclip with embedded mcs. I can is the NLY the reg of the point is by saving it as an mc, once again IE: creation of another and his creation, choose the reg point.

  If you try to adjust manually - you double-click the MC to edit it... Select the contents inside and move clips reg point.