ORA-01565
Hi allWhen I am trying to create a control file for a new creation of the database; Failed with the following error
ERROR on line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in the identification of file "/ dev/md/racvm/rdsk/d408.
ORA-27047: cannot read file header block
Additional information: 2
I checked the location of the file referred to in the right place and that is fine also the permissions are fine.
OS-HP-UX
Oracle: 10 gr 2
Help, please... I need to install this feature for objective test
concerning
Hmm... This is problematic.
You are able to read the file, however, when you run the create controlfile command, Oracle Gets a read error. Obviously, Oracle dislikes this raw device for some reason any.
I don't know what to tell you... it's just this raw device that you are having problems with? All raw devices on this host?
You might need to open an SR with Oracle.
You try to set an errorstack on error 27047 may see if revealing something useful. If you open an SR, it is likely that they would do it anyway.
Just do:
SQL> alter session set events '27047 trace name errorstack level 1';
Session altered.
SQL> create controlfile .....
When the error occurs, see the user_dump_dest of a trace with the errorstack in her file.
Sorry I can't be more helpful.
-Mark
Tags: Database
Similar Questions
-
ORA-01565: error in identifying spfile / ORA-12547: TNS: lost contact
Hello
just installed 2 node rac rac 11.2, but the instance that b fails to climb!
SQL > startup;
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/db/spfile/mydb.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/db/spfile/mydb.ora
ORA-12547: TNS: lost contact
SQL >
SPFile exists and the DSO is mounted and upward. same pfile/spfile works fine on the other instance
Thank youIn which group is the user to network?
What group you chose in the group administrator of the ASM?
Authorities who have your oracle executables (in the House of the grid and Oracle Home)?If you cloned Oracle Home, then it is very likely that the oracle Oracle executable Home is owned by oracle: oinstall, but it must be owned by oracle: asmadim (or prabably s/n) in your case.
Use setasmgidwrap on the oracle executable in the House of the Oracle and this should solve your problem.
(DBCA imlicitly calls it).Concerning
Sebastian -
ORA-01565: error in file identification
Hello
10 g R2 on windows 2003 server
I have these errors when creating the control file:
I put the data files on a mapped file (w) system.ORA-01565: error in identifying file 'W:\TEST\DATA\SYSTEM01.DBF' O/S-Error: (OS 3)
I heard that Oracle under windows cannot identify mapped filesystem. Is this really the case? Can you confirm please?
Thank you very much.I heard that Oracle under windows cannot identify mapped file system
That's right in a DEFAULT configuration, the default setting means all Oracle services (check Control Panel) run under the LocalSystem account. This internal account is not allowed access to readers in network for security reasons.
Solution:
Start Oracle services (at least the database service and listener) to the same user to the help that is used during authentication of the mapped network drive. For working in an Oracle environment this user must have administrator privileges and must belong to the ORA_DBA group, normally it is the user who did the installation of Oracle.Werner
-
Error ORA-17503 at the start of the instance data in the CARS
Hello!
I installed Oracle 11 g SE (11.2.0.4) with CARS with 2 nodes on RedHat 7.1 with separation of roles (grid and oracle db run under different users)
Just after installation it worked, I was able to connect to the database, create a table and see it on the two nodes of the RAC.
But after restarting the servers, I can not make it works again
Maybe someone could help me understand what I am doing wrong?
When I'm trying to start a database on the vm-ora-05 node instance, I get this:
sqlplus/nolog
01:35:22 @: > connect / as sysdba
Connect to an instance is idle.
01:35:28 SYS @ racdba1: > start
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/racdba/spfileracdba.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/racdba/spfileracdba.ora
ORA-12547: TNS: lost contact
01:35:32 SYS @ racdba1: >
**********************************
Environment variables for GRID
ORACLE_HOME=/U01/app/11.2.0.4/grid
ORACLE_SID = + ASM1
Environment variables for Oracle DB
ORACLE_HOME=/U01/app/Oracle/11.2.0.4/rachome1
ORACLE_SID = racdba1
**********************************
If I check the status of the disk groups and +DATA/racdba/spfileracdba.ora asmcmd file it seems to be Ok (for me at least)
[grid of grid@+ASM1] $asmcmd
ORACLE_SID = [+ ASM1]?
The Oracle base remains unchanged with the value/u01/app/oracle
[+] ASMCMD > lsdg
State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block
EXTERN MOUNTED N 512 4096 1048576 5121 4725 0 4725 0 SRC /.
EXTERN MOUNTED N 512 4096 4194304 153596 151240 0 151240 0 N DATA.
EXTERN MOUNTED N 512 4096 4194304 153596 153020 0 153020 0 N FRA.
ASMCMD [+] > ls-l +DATA/racdba/spfileracdba.ora
Name of type Redund time scratched Sys
N spfileracdba.ora = > +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
ASMCMD [+] > ls-l +DATA/RACDBA/PARAMETERFILE/spfile.267.894291829
Name of type Redund time scratched Sys
Fichier_parametres UNPROT COARSE NOV 03 01:00 Y spfile.267.894291829
**********************************
At the same time, do not know why oracleasm scandisks/listdisks appear not all discs...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm scandisks
Reload from disk partitions: fact
Cleaning up stale ASM disks...
ASM disks scanning system...
[root@vm-ora-05 Diba] # / usr/sbin/oracleasm listdisks
[root@vm-ora-05 Diba] #.
**********************************
Here is the result of the res stat-[NULL] crsctl you and crsctl check cluster
[grid@+ASM1 grid] $crsctl res stat - you
--------------------------------------------------------------------------------
TARGET STATE SERVER STATE_DETAILS NAME
--------------------------------------------------------------------------------
Local resources
--------------------------------------------------------------------------------
ORA. CRS.dg
Vm-ora-05 online
ORA. DATA.dg
Vm-ora-05 online
ORA. FRA.dg
Vm-ora-05 online
ORA. LISTENER.lsnr
Vm-ora-05 online
ORA.asm
LINE Started vm-ora-05 online
ORA. GSD
In offline mode offline vm-ora-05
ORA.net1.Network
Vm-ora-05 online
ORA.ons
Vm-ora-05 online
--------------------------------------------------------------------------------
Cluster resources
--------------------------------------------------------------------------------
ORA. LISTENER_SCAN1. LSNR
1 vm-ora-05 online
ORA. CVU
1 vm-ora-05 online
ORA. OC4J
1 vm-ora-05 online
ORA.racdba.db
1 stop an Instance offline online
Terminating the Instance offline in LINE 2
ORA.scan1.VIP
1 vm-ora-05 online
Ora - ora. VM - 05.vip
1 vm-ora-05 online
Ora - ora. VM - 06.vip
1 in LINE THROUGH MORE out of vm-ora-05
[grid@+ASM1 grid] $crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[grid@+ASM1 grid] $
Please help, this problem makes me crazy)
-rwxr-x---x 1 grid 209854149 28 Oct 02:10 /u01/app/11.2.0.4/grid/bin/oracle oinstall
^ ^ This x must do for setuid/setguid not x for execute
Check the docs on setuid/setguid and this note:
ASM login fails with ORA-12547: TNS: lost contact (Doc ID 1942740.1)
https://docs.Oracle.com/CD/E19683-01/816-4883/secfile-69/index.htmlThis should solve the problem:
/U01/app/11.2.0.4/grid/bin/Oracle chmod 6751
Concerning
Thomas
-
Hello
Everything was running as a result with the exception of a question with ENTERPRISE MANAGER I posted on the discussion. So following the favorable response of the discussion, what I did is I tried to change the listening port, and then I got this error message ORA-01031: insufficient privileges . Then after I uninstalled the database again and tried to remove all the listener again and tried to add the listener again, but has no wok. I have the grid installed in my pc. I already uninstalled dbca database so I wonder how I could resolve the question above? I have oracle grid in my pc and here is some information that you might need.
[grid@example admin] $ echo $ORACLE_SID
+ ASM
[grid@example admin] $ echo $ORACLE_HOME
/U01/app/11.2.0/grid
[grid@example admin] $ su - oracle
Password:
[oracle@example ~] $ echo $ORACLE_SID
ORCL
[oracle@example ~] $ echo $ORACLE_HOME
/U01/app/Oracle/product/11.2.0/Db_1
[oracle@example ~] $ echo $ORACLE_UNQNAME
ORCL
[oracle@example ~] $
[grid@example admin] $ vi sqlnet.ora
#NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)
SQLNET. AUTHENTICATION_SERVICES = (ALL)
NAMES. DIRECTORY_PATH = (TNSNAMES, HOSTNAME, EZCONNECT)
ADR_BASE = / u01/app/grid
Thanks Hemant K Chitale. According to your suggestion, I went through CRSCTL view of ALL... http://docs.oracle.com/cd/E11882_01/rac.112/e16794/crsref.htm#CWADD92153 ... AND it solved my problem thank you very much
CRSCTL overview
CRSCTL is an interface between you and Oracle Clusterware, analysis and requesting objects Oracle Clusterware Oracle Clusterware APIs.
Oracle Clusterware 11 g release 2 (11.2) introduced controls compatible with the cluster with which you can perform the check, start and stop operations on the cluster. You can run these commands from any node in the cluster to another node in the cluster, or on all nodes of the cluster, depending on the operation.
You can use the CRSCTL commands to perform several operations on Oracle Clusterware, such as:
- Start and stop Oracle Clusterware resources
- Activation and deactivation of the Oracle Clusterware demons
- Check the status of the cluster
- Management of the resources that are third-party applications
- Integration of Intelligent Platform Management Interface (IPMI) with Oracle Clusterware of failure isolation support and ensure the integrity of clusters
- Debug Oracle Clusterware components
[grid@example bin] $ crsctl start resources-all
CRS-2501: resource "ora.ons" is disabled
CRS-2672: attempt to start 'ora.evmd' on 'example '.
CRS-2672: attempt to start 'ora.cssd' on 'example '.
CRS-2672: attempt to start 'ora.diskmon' on 'example '.
CRS-2676: beginning of "ora.diskmon", the successful "example"
CRS-2676: beginning of "ora.evmd", the successful "example"
CRS-2676: beginning of "ora.cssd", the successful "example"
CRS-2672: attempt to start 'ora.asm' on 'example '.
CRS-2676: beginning of "ora.asm", the successful "example"
CRS-2672: attempt to start ' ora. DATA.dg' on 'example '.
CRS-2672: attempt to start ' ora. FRA.dg' on 'example '.
CRS-2676: beginning with ' ora. DATA.dg' on successful "example"
CRS-2676: beginning with ' ora. FRA.dg' on successful "example"
CRS-2672: attempt to start 'ora.orcl.db' on 'example '.
CRS-5017: the action "ora.orcl.db start" resource has met the following error:
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/orcl/spfileorcl.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/orcl/spfileorcl.ora
ORA-27140: attach to post/wait installation failed
ORA-27300: OS dependent operating system: invalid_egid failed with status: 1
ORA-27301: OS Error Message: operation not permitted
ORA-27302: an error occurred at: skgpwinit6
ORA-27303: additional information: current startup egid = 504 (oinstall), egid = 501 (asmadmin)
. For details, refer to "(:CLSN00107:))" "in ' / u01/app/11.2.0/grid/log/example/agent/ohasd/oraagent_grid/oraagent_grid.log '.
CRS-2674: beginning of 'ora.orcl.db', 'example' failed
CRS-2679: attempt to clean the 'ora.orcl.db' on 'example '.
CRS-2681: clean "ora.orcl.db" on successful "example"
CRS-4000: Start command has failed, or completed with errors.
[grid@example bin] $
ASM IS WATCH NOW TO THE LISTENING PORT
[grid@example bin] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on July 15, 2015 09:03:11
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=example.castrading.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date July 15, 2015 07:30:34
Uptime 0 days 1 h 32 min 36 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file
The listener log file /U01/app/grid/diag/tnslsnr/example/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=example.castrading.com) (PORT = 1521)))
Summary of services...
Service '+ ASM' a 1 instance (s).
Instance '+ ASM' READY State, has 1 operation for this service...
Service "orcl" has 1 instance (s).
Instance "orcl", status UNKNOWN, has 1 operation for this service...
The command completed successfully
[grid@example bin] $
-
I run SQLPLUS on windows and use sqlplus.
Conn sys as sysdba. Fine
Then, I want to see the tables under sysdba
I create the table and I can do SELECT * from table. SQL watch me release.
But I can't see tables
SELECT table_name FROM user_tables;
SELECT table_name FROM all_tables;
SELECT table_name FROM dba_tables;
SELECT * from user_objects where type_objet = "TABLE";
SQLPLUS:ORA - 00942: table or view does not exist.
How to fix it?
I created earlier DB and could do that, but I want to repair this database.
And he had problems with db mynewdb1, may be corrupt
recover database until cancel using backup controlfile;
ORA - 279 marked during: ALTER DATABASE RECOVER database until cancel using backup controlfile...
ALTER DATABASE RECOVER CONTINUE DEFAULT
C:\APP\STR\FLASH_RECOVERY_AREA\MYNEWDB1\ARCHIVELOG\2013_05_10\O1_MF_1_1_%U_ media recovery log. ARC
Friday 10 May 21:06:30 2013
Errors with log C:\APP\STR\FLASH_RECOVERY_AREA\MYNEWDB1\ARCHIVELOG\2013_05_10\O1_MF_1_1_%U_. ARC
Errors in the C:\APP\STR\diag\rdbms\mynewdb1\mynewdb1\trace\mynewdb1_pr00_9920.trc file:
ORA-00308: cannot open archived log ' C:\APP\STR\FLASH_RECOVERY_AREA\MYNEWDB1\ARCHIVELOG\2013_05_10\O1_MF_1_1_%U_. ARC'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 308 marked during: ALTER DATABASE RECOVER CONTINUE DEFAULT...
CREATE CONTROLFILE REUSE DATABASE RESETLOGS MYNEWDB1
WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
Default temporary tablespace will be necessary for a locally managed database in future release
Errors in the C:\APP\STR\diag\rdbms\mynewdb1\mynewdb1\trace\mynewdb1_ora_8588.trc file:
ORA-01565: error to identify the file ' % ORACLE_HOME%\DATABASE\DBS1%ORACLE_SID%. ORA'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-1503 scored at the course: CREATE CONTROLFILE REUSE DATABASE RESETLOGS MYNEWDB1...
Published by: 1005307 on 10.05.2013 18:08Hello
Welcome to the forums!
What you showed us, I guess that you have created the database manually using the CREATE DATABASE command?
If so, did you run CATPROC.sql and CATALOG.sql correctly? It seems that your problem is related to these scripts, because they are responsible for creating the tables and the data dictionary views.
Have you run them with SYS schema?
-
error: error at line 1: ORA-01503: CREATE CONTROLFILE failed
Hello
I'm the sinister scene I enter my database in nomount, but when I run create controlfile command
It shows me an error:
My controlfile content is:
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 1
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ' / test/opt/102/oradata/test/redo1.log' 100M, SIZE
GROUP 2 ' / test/opt/102/oradata/test/redo2.log' 100M, SIZE
GROUP 3 ' / test/opt/102/oradata/test/redo3.log' SIZE 100 m
DATA FILE
' / test/opt/102/oradata/test/system.dbf',
' / test/opt/102/oradata/test/undotbs1.dbf',
' / test/opt/102/oradata/test/sysaux.dbf',
' / test/opt/102/oradata/test/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
After running this, I got the error below:
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
*
ERROR on line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in the identification of file ' / test/opt/102/oradata/test/system.dbf'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
what goes wrong with this script.Your disaster recovery operation became a disaster it seems :)
Try copying the available backup files and repeat the same thing.
Kind regards
CSMPublished by: CSM. DBA on July 30, 2012 11:50
-
Error at line 1: ORA-01503: creating the control file has no
Hello
I do disaster when I create controlfile by trace, I got an error
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 1
MAXLOGHISTORY 292
LOGFILE
GROUP 1 ' / test/opt/102/oradata/test/redo1.log' 100M, SIZE
GROUP 2 ' / test/opt/102/oradata/test/redo2.log' 100M, SIZE
GROUP 3 ' / test/opt/102/oradata/test/redo3.log' SIZE 100 m
DATA FILE
' / test/opt/102/oradata/test/system.dbf',
' / test/opt/102/oradata/test/undotbs1.dbf',
' / test/opt/102/oradata/test/sysaux.dbf',
' / test/opt/102/oradata/test/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
*
ERROR on line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in the identification of file ' / test/opt/102/oradata/test/system.dbf'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
I wrote something wrong?
Thank youI understand, but I couldnot restoration l datafile by rman restore command coz base not at the stage of editing!
Appear you are not using the rman backup catalog and controlfile to help register rman backup.
in this case if you recreate the controlfile to way you will lose all your information backup of controlfile.
better restore controlfile from piece of backup or AutoSave. as restore controlfile from "" -
ORA-01503: CREATE CONTROLFILE failed
Team,
DB = 10.2.0.1
OS RHEL AS 4 =
While im rename my database name HRMS by recreating the controlfile, im getting below error. I don't know how to solve this problem.
I followed all the steps correctly but anyway im not meeting this goal.
FYI...
SYS > @new_controlfile.sql
CREATE CONTROLFILE REUSE SET DATABASE "HRMS" RESETLOGS
*
ERROR on line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in the identification of file ' / home/oracle/database/HRMS/system01.dbf'
ORA-27037: unable to get file status
Linux error: 2: no such file or directory
Additional information: 3
Could you please help me solve this problem?
Thank you
HarryYou execute a CREATE CONTROLFILE statement.
All data files are listed.
The data files must reside in these places or the statement fails.
I don't see any problem. If the data files are in a different location, simply change the sql code.
As we do not have the content of the declaration, and you did not sb90275, what type of assistance do you need?------
Sybrand Bakker
Senior Oracle DBA -
suitable init.ora or .sql to launch isql
Hello!
I installed Ora11gr1 in my suse11.1, but when I do,
. / isqlplus / as sysdba
There is a problem with the original init.ora in my pc, I think that the problem of memory... I solved it commenting line SHARED_POOL_SIZE but after that, there is another problem.
ORA-00205: error in the identification of control file.
So, I create a sql to re-create the control file and, / sqlplus sys/sys as sysdba @ p.SQL/
SHUTDOWN IMMEDIATE
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "orcl" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 1
MAXLOGHISTORY 449
LOGFILE
GROUP 1 ' / dev/sdc11/app/oracle/product/11.1.0/db_1/dbs/t_log1.f' SIZE 500 K,.
GROUP 2 ' / dev/sdc11/app/oracle/product/11.1.0/db_1/dbs/t_log2.f' SIZE 500 K
DATA FILE
' / dev/sdc11/app/oracle/product/11.1.0/db_1/dbs/t_db1.f',
' / dev/sdc11/app/oracle/product/11.1.0/db_1/dbs/dbu19i.dbf'
WE8DEC CHARACTER SET
;
But the latest problem is:
Error ORA-01565 in identification of file
ORA-27047 cannot read the file header block
Linux error: 92: Protocol not available
Additional information: 1
What should I do?
I don't understand because it is a clean install of Oracle11gr1.
Thank you.Normally I would recommend review the documentation for http://tahiti.oracle.com and in particular the installation manuals.
Inyour case, I think go to http://otn.oracle.com, clicking tutorials (in upper right) and looking at the tutorial 'database on linux install' might be more useful.
-
12cR1 CARS on RHEL6.6 installation
Hello
I try to install oracle grid 12cR1 on RHEL6.6. (2 node RAC servers)
During the installation step (93%): "creating the database repository of mgmt of grid container", see the following error each time.
NEWS: Read: 58% complete
WARNING: Line break: 58% complete
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: 62% complete
WARNING: Line break: 62% complete
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: 63% complete
WARNING: Line break: 63% complete
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: 66% full
WARNING: Line break: 66% full
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: complete the creation of the database
WARNING: Line break: complete the database creation
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: 70% full
WARNING: Line break: 70% full
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: 80% full
WARNING: Line break: 80% full
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: DBCA operation failed.
WARNING: Line break: DBCA operation failed.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
NEWS: Read: look at the log file ' / u01/app/grid1/cfgtoollogs/dbca/_mgmtdb/_mgmtdb2.log ' for details.
WARNING: Line break: look at the log file ' / u01/app/grid1/cfgtoollogs/dbca/_mgmtdb/_mgmtdb2.log ' for details.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Finished named Plugin: creation of the database repository for Oracle Grid Infrastructure Management container ^ C
[root@nst-ibmx3550m4-05 ~] tail # ' / u01/app/grid1/cfgtoollogs/dbca/_mgmtdb/_mgmtdb2.log '.
Complete the creation of the database
DBCA_PROGRESS: 70%
DBCA_PROGRESS: 80%
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
DBCA_PROGRESS: DBCA operation failed.
Could you please tell me the reason for this error. I retried installation several times but seeing the same error.
What Miss me?
Hello
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ CRS/_mgmtdb/spfile-MGMTDB.ora".
ORA-17503: ksfdopn:2 could not open the file +CRS/_mgmtdb/spfile-MGMTDB.ora
Looks like you are using 4 k sector drive and hit the problem that is mentioned in https://support.oracle.com/epmos/faces/DocContentDisplay?id=1950510.1
Solution is to apply the hotfix 16870214, simply follow the steps mentioned in the MOS score above.
Kind regards
Marco
-
Hello
I have the 11.2.0.4 on linux 6.7 oracle oracle database.
I have install oracle database unique instance with the asm option.
I have 2 users: oracle and grid
My database is open and that all things are good!
I want to install oracle gateway for the database connection to sql server. This product get me an error: you cannot create directory on u01/app/grid/product/11.2.0/ASM.
To resolve this error, running the command below:
chown-r grid: oinstall/U01
chmod-r 775/U01
After running these commands and restart the server, I can not fire database.
My start is mounted, but I can not fire database with the oracle user:
sqlplus sys / * as sysdb
SQL > startup
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of file "+ DATA/orcl/spfileorcl.ora".
ORA-17503: ksfdopn:2 could not open the file +DATA/orcl/spfileorcl.ora
ORA-12547: TNS: lost contact
......................
with user network, is the output of the command below:
srvctl start database orcl d
RPRC-1079: failed to start of ora.orcl.db resources
ORA-12547: TNS: lost contact
CRS-5017: the action "ora.orcl.db start" resource has met the following error:
ORA-12547: TNS: lost contact
. For details, refer to "(:CLSN00107:))" "in ' / u01/app/grid/product/11.2.0/ASM/log/it/agent/ohasd/oraagent_grid/oraagent_grid.log '.
CRS-2674: beginning of 'ora.orcl.db' in 'it' failed
ORA-12547: TNS: lost contact
Can someone help me?
It will be broke the environment:
chown-r grid: oinstall/U01
chmod-r 775/U01
You may be able to save things by running root.sh script in your GI House and your DB to correct the permissions of file again, but I doubt it: it is quite complicated. Probably best to start over.
-
Duplicated on the same server database
Hi, I'm trying to replicate a database on the same server. It seems to have worked, but I get a lot of error messages in the log of alerts. Please can someone tell if I'm doing something wrong or that I don't need to worry about these messages. Here's what I do:
Taking rman backup archivelog and proddb database
Do pfile from spfile proddb
create directories by replacing the name proddb by clonedb
copy the proddbinit.ora file rename to replace all references to proddb with clonedb of clonedbinit.ora
Add 2 entries to clonedbinit.ora:
* .db_file_name_convert = 'PRODDB', 'CLONEDB '.
* .log_file_name_convert = 'PRODDB', 'CLONEDB '.
Instance defined in CLONEDB and startup nomount
Sign in to rman - rman AUXILIARY.
DUPLICATE TO CLONEDB DATABASE
BACKUP LOCATION ' / U01/PRODDB.
I haven't specified a SPFILE because I don't think I need one as I created a complete pfile file
"When I look in the alerts log, I get a message saying load ' ORA-01565: could not open the Spfile" and error in the identification of file & apos spfileclonedb.ora & apos;
I read if you clone to a database on the same server, you must manually create your own pfile and do not use the SPFILE option during replication.
What I am doing wrong?
Thank you very much
Adam
I think your spfile has no parameter value:
db_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'
To ensure that:
create pfile from spfile;
then check your pfile file to see the entrance is there or not.
Option 1
-----------------
Just add that then you can do it in duplicate using the set command order
-----------------------------------------------
Run {}
allocate channel pr1 type disk;
allocate channel pr2 type disk;
allocate auxiliary channel stdby type disk;
current spfile database of target duplicate database tests
:
:
Set db_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'
Set log_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'
:
;
}
Option 2
------------------------
If it not is not for this put entry pfile.
Start the databases using pfile and then create spfile;
SPFile to start;
Try again
See you soon
M
-
Problems with Oracle 11g R2 XE
Hi guys,.
I had a problem and have to solve for abt a week now and tried a lot of solutions.
My environment:
Windows 7 Professional SP 1 64-Bit
AMD Phenom II x 4 940 @3.0 GH
4 GB of RAM (in use during the installation of 40%)
The Windows Firewall is enabled (but oracle.exe and lstnr.exe are configured as an exception)
Avast! FREE Antivirus Version 2014.9.0.2018
Installation (both times with the same result):
Installed O 11g 64-Bit XE in two different ways:
I was logged in with user lies in Admingroup
Installation started via right click with administrationprivileges
I activated the Administrators account and logged with adminprivileges.
After that, I installed the 11g XE 64 bit
between the two steps I cleaned and restarted my system, register was too empty and the file has been deleted manually
as a first step, I get this problem: Windows cannot find " " http://127.0.0.1:%HTTPPORT%/Apex/f?p=4950 "
-> Manually changing HTTPORT % to 8080
-> now I could double-click the shortcut, Firefox/IE/Chrome opens but 404 not Found error is returned
-XracleXETNListener OracleServiceXE, both are running
[code]
C:\Windows\System32 > lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on November 4, 2014 18:02
: 56
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = D³rsinKurt-PC)(PORT=1521)
)))
STATUS of the LISTENER
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 11.2.0.2.0 - Prod
ction
Start date November 4, 2014 13:53:50
Uptime 0 days 4 h 9 min 9 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\D³rsinKurt-PC\list
ener\alert\log. XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = D³rsinKurt-PC)(PORT=1521)))
The listener supports no services
The command completed successfully
[/ code]
If Listenerservice is up and running, but I can't find the http Service 8080 with netstat-a
so I started to study a little more:
Registryfolder: HK_LOCAL_MACHINE\SOFTWARE\ORACLE is installed
following subdirectories are installed: KEY_XE, ODP.NET, OracleMTSRecoveryService
What I tried (both ways, with and without adminstrationprivileges):
I created two new DWORD values in KEY_XE ORACLE_SID_AUTOSTART and - STOP both to true and stopped and started services, nothing changes.
Inserted the two users (Administrator and normal user) in the Group ORA_DBA, nothing changes, even tried to set and the new
you wanted to connect to sqlplus using the console:
C:\Windows\System32 > sqlplus system
SQL * more: Production version 11.2.0.2.0 on 4 Nov 18:09:21 Di 2014
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session IDs: serial number 0: 0
Enter the user name:
When I start directly at the sqlplus prompt and write the start of the command I got the following msg: ORA-01031: insufficient privileges
I looked in the folder ORA_BASE and looked at the oradat file, it contains a XE-folder that is empty, the admin folder contains: XE / and adump, dpdump and pfile, all three are empty (what does this mean? No DB created at all?)
I looked at the file ORA_HOME and found initXE.ora, oradba.exe, oradim and PWDXE.ora
I looked in the oradim.txt log:
Kills Nov 04 11:21:17 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-arret-SID xe - usrpwd * - immediate shutmode - log oradim.log
Kills Nov 04 11:21:55 2014
ORA-01012: not connected
Kills Nov 04 11:23:01, 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-demarrage-SID xe - usrpwd * - log oradim.log - nocheck 0
Kills Nov 04 11:23:38 2014
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of the file "C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora".
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) Das System kann die angegebene Datei nicht find.
-> bingo, 1st question: there is no spfileXE.ora, how can I create it? more in the dbs-file there is only an init.ora and not initXE.ora?
Looked in the log-file files 5 from clscX.txt (probably after each systemreboot? containing the following):
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2014-11-04 - 13:53:52.197: [5576] [default] ut_read_reg:2:ocr SOFTWARE\Oracle\olr registry key cannot be opened. error 2
[DESTROYED] clse_get_crs_home [5576]: error recovery configuration OLR [0] [error opening of the olr registry key. The system could not find the file.
]
-> SystemLanguage is German, so I translated the German parts, perhaps he was lost in the translation of sth
-> 2nd question: is there a missing registry key?
In addition, I looked at the ORACLE_HOME/server/config/home cloesly folder:
cloneDBCreation:
SQL > Create controlfile reuse database "XE" value
2 MAXINSTANCES 8
MAXLOGHISTORY 3 1
MAXLOGFILES 16 4
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
DataFile 7
8 "C:\oraclexe\app\oracle\oradata\XE\system.dbf"
9 "C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf."
10 "C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf."
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf '.
LOGFILE 12
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: not connected
SQL > exec dbms_backup_restore.zerodbid (0);
SP2-0640: not connected
SP2-0641: "EXECUTE" requires the connection to the server
SQL > shutdown immediate;
ORA-01012: not connected
"SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora ";
ORA-01031: insufficient privileges
---------------------------
CloneRmanRestore:
"SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ";
ORA-01031: insufficient privileges
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL > set off echo;
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
ERROR:
ORA-01031: insufficient privileges
SQL > spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
---------------------------
PostDBCreation:
QL > Connect "SYS" / "' * ' as SYSDBA"
ERROR:
ORA-01031: insufficient privileges
SQL > set echo on
SQL > //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\fast_recovery_area ';
SP2-0103: nothing in the SQL buffer to run.
SQL > start
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5.
SP2-0640: not connected
SQL > create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora 'FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ';
SP2-0640: not connected
SQL > shutdown immediate;
ORA-01012: not connected
SQL > connect "SYS" / "' & & sysPassword ' as SYSDBA"
ERROR:
ORA-01031: insufficient privileges
.
.
.
---------------------------
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: cannot open the file 'C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql '.
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmsclr.plb;
SQL > DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: not connected
SQL > CREATE the PUBLIC DATABASE LINK DBMS_CLRDBLINK with the HELP of "ORACLR_CONNECTION_DATA";
SP2-0640: not connected
SQL > CREATE or REPLACE LIBRARY wrapped ORACLECLR_LIB
2 a000000
1 of 3
4 abcd
5-abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11-abcd
12 abcd
13 abcd
14 abcd
ABCD 15
ABCD 16
17 abcd
18 abcd
19 16
20 51 8 d
21 L/XXXXXXXXXX...
XXXXXXX 22...
23
24.
SP2-0640: not connected
SQL > DROP TYPE DBMS_CLRParamTable;
SP2-0640: not connected
SQL > DROP TYPE DBMS_CLRType;
SP2-0640: not connected
SQL > CREATE or REPLACE TYPE wrapped DBMS_CLRType
---------------------------
XE:
The created instance.
So I hope this is enough information
Thanks in advance
Dursin Kurt
OK guys I found:
Problem is the XE.bat - Script could not add me to the ORA_DBA group.
Reason: my Computername and username, both had a mutation of the vowel 'u '.
Why it has not worked to my laptop computer company too have both my 'U' in the username
solved!
-
Hi guys,.
I would be grateful if you could help me with the following problem I am unable to locate my spfile said database.
SQL > show the spfile parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
+DATA03/cpmstg/spfilecpmstg.ora string SPFile
When I go in ASM to the location of the said this is what I see:
ASMCMD > ls
spfilecpmstg
ASMCMD > ls - lrt
WARNING: 'r' is deprecated for 'method '.
Please use 'inverse '.
Name of type Redund time scratched Sys
N spfilecpmstg = > +DATA03/CPMSTG/PARAMETERFILE/spfile.510.859115335
Now, when I go to the default location i.e./u02/app/oracle/product/11.2.0.4/db/dbs I see the init file:
[oracle@ora-stg-1a dbs] $ ls - ltr initcpmstg1.ora
-rw - r-. 1 oracle oinstall 41 24 September 11:25 initcpmstg1.ora
The init file contains the following entry:
[oracle@ora-stg-1a dbs] $ initcpmstg1.ora more
SPFile='+DATA03/CPMSTG/spfilecpmstg.ora'
Now my question is:
- Why I get ORA-01565: could not open the Spfile + DATA03/cpmstg/spfilecpmstg.ora. ?
- How can I fix?
Note: I am running Oracle Database Enterprise Edition 11.2.0.4.0 and run Linux 6 (64-bit).
Greetings
Nadège
So if you hurt the spile file, do a "create spfile from pfile".
Maybe you are looking for
-
So guys I am buying a new PC and thought what the right amount of money to buy the PC? Everything that I will list below will cost around GBP 674.514. The parties are therefore below Processor - Intel Core I5 4570 4th Gen 3.2 GHzRAM-8 GBMotherboard -
-
No on Satellite L505 boot device
I have the Satellite L505 with windows 7 Home Premium.My problem is there is no boot device, but sometimes it works and start normally.What should I do? Please help me.
-
I'm trying to get two Boolean buttons to reset when the value of a ring menu. For this I use a structure of event defined to execute with a ring value change. However I have another code that should be run while the structure of the event expected
-
How to restore WRusr.dill
I installed Firefox on my computor but when I try to use it it shows cannot find WRusr.dill. I have no idea wht he is but he says reinstall me but when I do the same thing happens. It has also affected my game Peggle. I need help
-
is there a phone number to call for a follow-up if I return to my xbox due to defects of material machine? mailing address to return the machine will also help please help :D