ORA-07202 creating the DB

Similar Questions

• Error ORA-01115 creating the materialized view

  Hi friends,

  When I create a materialized view it by throwing some error

  CREATE THE PNR_RES_MV MATERIALIZED VIEW
  TABLESPACE FAS
  NOCACHE
  LOGGING
  NOCOMPRESS
  NOPARALLEL
  IMMEDIATE CONSTRUCTION
  REFRESH THE STRENGTH TO DEMAND
  WITH THE PRIMARY KEY
  AS
  SELECT C_CREATION_DATE, C_PNR, B.CARRIER_CD1, B.CARRIER_CD2, B.CURRENT_STATUS_CD, A.CANCELLED_IND, A.BOOKING_OFFC_NMBR,-, B.LEG_NMBR, C_PAX_NMBR
  COUNT (CASE WHEN TRIM (B.CURRENT_STATUS_CD) = "HK" AND (TRIM (C_CHANGE_OR_CANCELL_IND) = "OR C_CHANGE_OR_CANCELL_IND IS NULL) THEN 1 OTHER TRAILING NULL) CONFIRMED_COUNT,.
  COUNT (CASE WHEN (B.CURRENT_STATUS_CD) TRIM = "HK" AND (TRIM (C_CHANGE_OR_CANCELL_IND) = "or C_CHANGE_OR_CANCELL_IND IS NULL) null THEN 1 OTHER END) cancELLED_COUNT
  OF PNR_RES_LEG_PAX_MV B, PNR_RES HAS
  WHERE A.PNR = B.PNR
  AND a.CREATION_DATE = b.CREATION_DATE
  - and A.BOOKING_OFFC_NMBR = '1F'
  - AND C_PNR = 'XE76V. '
  AND A.FILE_UPDATE_DATE. A.UPDATE_DATE IN (SELECT MAX (D.FILE_UPDATE_DATE |)) (UPDATE_DATE) OF PNR_RES D WHERE D.PNR = B.PNR AND D.CREATION_DATE = B.CREATION_DATE)
  GROUP OF C_CREATION_DATE, C_PNR, B.CARRIER_CD1, B.CARRIER_CD2, B.CURRENT_STATUS_CD, A.CANCELLED_IND, A.BOOKING_OFFC_NMBR;

  
  

  
  

  When executing it it gives this error

  
  

  ORA-01115: reading block IO file error 4 (block # 63757)
  ORA-01110: data file 4: ' D:\APP\IGT\ORADATA\ORCL\USERS01. DBF'
  ORA-27070: async read/write failed
  OSD-04006: ReadFile() failure, unable to read the file
  S/O-error: (27 OS) the drive cannot find the sector requested.

  
  

  
  

  And I checked through RMAN

  RMAN > validate the audit logic datafile 4;

  From post 11 March 14
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 127 type device = DISK
  channel ORA_DISK_1: starting from the data file validation
  channel ORA_DISK_1: datafile (s) for specification validation
  Enter a number of file datafile = 00004 name = D:\APP\IGT\ORADATA\ORCL\USERS01. DBF
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure to validate the command channel ORA_DISK_1 11/03/2014 13:0
  04:12
  ORA-19501: read error on the file 'D:\APP\IGT\ORADATA\ORCL\USERS01. DBF', block numbe
  r 63745 (block size = 8192)
  ORA-27070: async read/write failed
  OSD-04016: error queuing an asynchronous i/o request.
  S/O-error: (27 OS) the drive cannot find the sector requested.

  
  

  
  

  Please suggest me what to do it is a mistake to associate related database or OS. DB version is - 11 GR 2

  
  

  Kind regards

  
  

  Arya
  

  
  

  This is the error message that you should focus:

  > O/S-error: (27 OS) the drive cannot find the sector requested.

  Run disk checker utilities, eventually the file system is damaged.

  Hemant K Collette

• Error at line 1: ORA-01503: creating the control file has no

  Hello
  
  I do disaster when I create controlfile by trace, I got an error
  
  CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
  MAXLOGFILES 16
  MAXLOGMEMBERS 2
  MAXDATAFILES 30
  MAXINSTANCES 1
  MAXLOGHISTORY 292
  LOGFILE
  GROUP 1 ' / test/opt/102/oradata/test/redo1.log' 100M, SIZE
  GROUP 2 ' / test/opt/102/oradata/test/redo2.log' 100M, SIZE
  GROUP 3 ' / test/opt/102/oradata/test/redo3.log' SIZE 100 m
  DATA FILE
  ' / test/opt/102/oradata/test/system.dbf',
  ' / test/opt/102/oradata/test/undotbs1.dbf',
  ' / test/opt/102/oradata/test/sysaux.dbf',
  ' / test/opt/102/oradata/test/users01.dbf'
  CHARACTER SET WE8ISO8859P1
  ;
  CREATE CONTROLFILE SEt DATABASE 'test' RESETLOGS ARCHIVELOG
  *
  ERROR on line 1:
  ORA-01503: CREATE CONTROLFILE failed
  ORA-01565: error in the identification of file ' / test/opt/102/oradata/test/system.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  
  I wrote something wrong?
  
  Thank you

  I understand, but I couldnot restoration l datafile by rman restore command coz base not at the stage of editing!

  Appear you are not using the rman backup catalog and controlfile to help register rman backup.
  in this case if you recreate the controlfile to way you will lose all your information backup of controlfile.
  better restore controlfile from piece of backup or AutoSave. as restore controlfile from ""

• Error ORA-27418 creating the calendar for DBMS_SCHEDULER

  Hello world
  
  Im trying to set up a schedule for dbms_scheduler on Oracle 11 g 2 test user sys like this server:
  
  run DBMS_SCHEDULER. () CREATE_SCHEDULE
  repeat_interval = > ' FREQ = DAILY; BYHOUR = 10:30 '.
  start_date = > to_timestamp_tz ('2013-03-11 Europe/Berlin ',' YYYY-MM-DD TZR').
  schedule_name = > 'FULLBACKUP_DAILY');
  
  
  But I get an error ORA-27418 and ORA-06512:
  
  DBMS_SCHEDULER BEGIN. CREATE_SCHEDULE (repeat_interval = > ' FREQ = DAILY;) BYHOUR = 10:30 ', start_date = > to_timestamp_tz ('2013-03-11 Europe/Berlin ',' YYYY-MM-DD TZR'), schedule_name = > 'FULLBACKUP_DAILY'); END;
  
  *
  FEHLER in line 1:
  ORA-27418: Syntaxfehler in Wiederholungsintervall oder Kalender
  ORA-06512: in 'SYS. DBMS_ISCHED ', line 997 '.
  ORA-06512: in 'SYS. DBMS_SCHEDULER', line 1486
  ORA-06512: In line 1
  
  I had no right as sys to configure a scheduler or forgot to activate something?
  
  Thanks for the help!
  
  Kind regards
  David

  Hello

  Could you try following interval?

  repeat_interval => 'FREQ=DAILY;BYHOUR=10;BYMINUTE=30'
  

  Kind regards

• Help to create the view - error: ORA-00955: name is already used by an existing object

  Hello

  I am trying to create the following view but sqlplus displays a message and point of view has not been created. I use 11g Express.

  SQL > create view (client, f_pedido, total) orders as

  2     (

  3 select usr, date, sum (rising) as important

  4 of

  5             (

  6 select lineas_any.usuario as usr, lineas_any.fecha_pedido as date, lineas_any.cantidad * as rising referencia.precio

  7 of lineas_any

  inner join 8

  referencia 9

  10 on lineas_any.referencia = referencia.codbarras

  11             )

  Group 12 by usr, date

  13)

  14 order by date asc, usr;

  of lineas_any

  *

  ERROR on line 7:

  ORA-00955: name is already used by an existing object

  There are also descriptions of the two tables involved:

  SQL > describe lineas_any

  Name                                          Null?    Type

  ------------------------------------------------------ -----------------

  USER NOT NULL VARCHAR2 (60)

  FECHA_PEDIDO NOT NULL DATE

  REFERENCIA NOT NULL VARCHAR2 (15)

  AMOUNT NUMBER (2)

  SQL > describe referencia

  Name                                          Null?    Type

  ------------------------------------------------------ -----------------

  CODBARRAS NOT NULL VARCHAR2 (15)

  PRODUCT NOT NULL VARCHAR2 (50)

  FORMATO NOT NULL VARCHAR2 (20)

  SILTING NOT NULL VARCHAR2 (15)

  PRECIO NOT NULL NUMBER (7.2)

  STOCK NUMBER (5) NOT NULL

  MIN_STOCK NOT NULL NUMBER (5)

  MAX_STOCK NOT NULL NUMBER (5)

  Please, could someone help me in this matter?

  Thanks in advance.

  Kind regards

  It means that it is already an object named peridos. Question:

  Select object_type from user_objects where object_name = 'PERIDOS;

  to find out what type of object it is. Any chance you try to change the existing definition of peridos view? If so, use

  CREATE or REPLACE view orders (customer, f_pedido, total) as...

  SY.

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• Duplicate database: ORA-19504: could not create the file "+ DATA1.

  Hi all

  I'm getting "ORA-19504: cannot create the file '+ DATA1' error when the active database duplication, no - ASM to ASM.» Source is 11.1.0.7 target is 11.2.0.1. Operating system is RHEL 5.5

  So far, I did as follows:

  created the password on the source and target file

  created source into the target and vice versa tns entries

  connectivity to test two-way

  set pfile on target with the following parameters:

  db_name

  = CLONE

  DB_FILES = 500

  log_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1/database".

  db_unique_name = CLONE

  I use following command to reproduce:

  Run {}

  Configure auxname for datafile 1 to "+ DATA1;

  Configure auxname for datafile 2 to "+ DATA1;

  Configure auxname for datafile 3 to "+ DATA1;

  Configure auxname for datafile 4 to "+ DATA1;

  Configure auxname for datafile 5 to "+ DATA1;

  Configure auxname for datafile 6 to "+ DATA1;

  Configure auxname for datafile 7 to "+ DATA1;

  Configure auxname for datafile 8 to "+ DATA1;

  Configure auxname for datafile 9 to "+ DATA1;

  Configure auxname for datafile 10 to "+ DATA1;

  Configure auxname for datafile 11 in "+ DATA1;

  Configure auxname for datafile 12 to "+ DATA1;

  Configure auxname for datafile 13 to "+ DATA1;

  Configure auxname for datafile 14 to "+ DATA1;

  Configure auxname for datafile 15 to "+ DATA1;

  Configure auxname for datafile 16 to "+ DATA1;

  Configure auxname for datafile 17 to "+ DATA1;

  Configure auxname for datafile 18 to "+ DATA1;

  Configure auxname for datafile 19 to "+ DATA1;

  Configure auxname for datafile 20 to "+ DATA1;

  Configure auxname for datafile 288 to "+ DATA1;

  Configure auxname for datafile 295 to "+ DATA1;

  Configure auxname for datafile 314 to "+ DATA1;

  Configure auxname for datafile 351 to "+ DATA1;

  Configure auxname for datafile 352 to "+ DATA1;

  Configure auxname for datafile 353 to "+ DATA1;

  Configure auxname for datafile 354 to "+ DATA1;

  Configure auxname for datafile 379 to "+ DATA1;

  Configure auxname for datafile 392 to "+ DATA1;

  Configure auxname for datafile 393 to "+ DATA1;

  Configure auxname for datafile 394 to "+ DATA1;

  Configure auxname for datafile 395 to "+ DATA1;

  Configure auxname for datafile 396 to "+ DATA1;

  Configure auxname for datafile 397 to "+ DATA1;

  Configure auxname for datafile 398 to "+ DATA1;

  Configure auxname for datafile 399 to "+ DATA1;

  Configure auxname for datafile 400 to '+ DATA1;

  Configure auxname for datafile 401 to "+ DATA1;

  Configure auxname for datafile 402 to "+ DATA1;

  Configure auxname for datafile 403 to "+ DATA1;

  Configure auxname for datafile 404 to "+ DATA1;

  Configure auxname for datafile 405 to "+ DATA1;

  Configure auxname for datafile 406 to "+ DATA1;

  Configure auxname for datafile 407 to "+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp01.dbf' to '+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp02.dbf' to '+ DATA1;

  switch datafile;

  duplicate target database to "clone".

  active database

  pFile

  db_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1;

  }

  Any ideas?

  Thank you

  Vinod

  A number of things.

  (1) If you're going to go to a different version of oracle, then duplicate only is not supported.

  (2) assuming that the target and the auxiliary of the versions of database is the same, you don't need all your configure auxname, set the datafile newname and switch controls.

• Cannot create the ASM Diskgroup ORA 15020 and ORA-15018

  Hello team,

  Could not create the ASM diskgroup with the following error:

  SQL > create diskgroup redundancy data_asm1 external disk ' / dev/sdf *;

  create diskgroup redundancy data_asm1 external disk ' / dev/sdf. "

  *

  ERROR on line 1:

  ORA-15018: diskgroup cannot be created.

  ORA-15020: discovered in double disc ASM 'DATA_ASM1_0000 '.

  ASM Diskstring

  SQL > show parameter asm_diskstring

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  asm_diskstring string/dev/oracleasm/disks/DISK *, /dev / sd *

  Please let me know how to solve this problem

  Kind regards

  Hello

  check your disc diskgroup status grid +. display result

  1 res ora of $ crsctl State. GRID.dg or $ crsctl status res ora.grid.dg

  Note the distinction uppercase / lowercase of the crs resource

  2. run below as a user of the grid. (necessary to set SID = + ASM? If not already preset)

  ASMCMD > lsdg

  Tobi

• ORA-19504 cannot create the file "+ FRA/test1".

  Hi all

  OPERATING SYSTEM:-RHEL5

  DB version: GR 2-11

  I'm trying to save a tablespace in the slot path mentioned using the script below

  RMAN > backup tablespace users of devices type disk;

  But what exactly is the error I get: -.

  RMAN > backup tablespace users of devices type disk;

  From backup 2014-01 - 09:12:37:44

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 23 type of device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  Enter a number of file datafile = name=+DATA/orcl/datafile/users.259.836129771 00004

  channel ORA_DISK_1: starting piece 1 at 2014-01 - 09:12:37:44

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of the backup command on the 09/01/2014 12:37:45 channel ORA_DISK_1

  ORA-19504: could not create the file "+ FRA/test1".

  ORA-17502: ksfdcre:4 cannot create the file + FRA/test1

  ORA-15005: name "test1" is already used by an existing alias

  Configure it order what I did is: -.

  RMAN > CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT "+ FRA/test1";

  and I create the destination required "+ FRA/test1".

  Thanks in advance

  How about using below

  Set UP the FORMAT of DISC TYPE CHANNEL DEVICE "+ FRA/orcl/test1_t%t_s%s_p%p";

  Concerning

  Anurag

• 12 c: ORA-65049: creating local user or role is not permitted in the CBD$ ROOT

  Last night, I installed Oracle 12 c on OEL 6.4. See Oracle Spatial installation and graph 12 c on OEL 6.4 .

  Today, I tried to create a test user following a syntax which worked for 11g but I got a permission error.

  $ sqlplus sys as sysdba

  SQL * more: Production of the version 12.1.0.1.0 Wed Jun 26 07:08:11 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > GIVING DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd;

  GRANT DBA, CONNECT, RESOURCE to STEVE IDENTIFIED BY dbl-secret-pwd

  *

  ERROR on line 1:

  ORA-65049: creating local user or role is not permitted in CBD$ ROOT

  Any ideas why I get this error in 12 c?

  Hello

  Its new, so I think that you must first create the PDB (plugable DB), then you can create user as part of the PDB not covered by the CBD (DB container),

• Could not commit: ORA-00928: lack of creating the table SELECT keyword

  Hello guys.
  I tried to create the table with web interface on oracle 11g.
  
  I just follow this path on interface: schema-> table-> create-> standard (lot organized)-> SQl select on (set using the)->
  and I just use these scripts to create the table:
  
  CREATE TABLE suppliers
  (the number (10) of supplier_id not null,)
  supplier_name varchar2 (50) not null,
  Contact_Name varchar2 (50)
  );
  
  but this error occurred: failed to commit: ORA-00928: lack of SELECT key word!
  Please lock on this picture for more information: http://s17.postimg.org/kgoumzmvz/attachment.jpg
  
  could you help me please?
  and I could not find any manual for working with the web interface in oracle 11g.
  Please give me somesources to start.
  Thank you.

  1003778 wrote:
  Thank you sybrand_b
  but I already read this document.
  Unfortunately, there is nothing on the creation of table with sql scripts in this document!

  and I really don't understand how to create table with SQL commands! My question has not yet been answered.
  you please give me little details about it?
  for example, how can create table using this sql command:

  CREATE TABLE suppliers
  (the number (10) of supplier_id not null,)
  supplier_name varchar2 (50) not null,
  Contact_Name varchar2 (50)
  );

  Thank you.

  Edited by: 1003778 may 3, 2013 11:43

  When you got to the CREATE TABLE screen, you have selected "set using the--> SQL.
  Did you notice in the window that appears, just above this entry field is this text: "enter a SQL * select * statement below.» ' + This query results will be used to fill the table with Canada.* + "(underlining)
  And hip, just to the left of this field is this text: «CREATE TABLE AS»

  He tries to build a ' CREATE TABLE AS SELECT... ». Creates a table with the same structure as the table in which you SELECT and fills with the results of this SELECT '. With your entry, you create a CREATE TABLE AS CREATE TABLE to read statement...

  If you want to create your tables with a simple CREATE TABLE command, go to sqlplus and do it. You want to have a graphical interface to help build a simple CREATE table, when you get to the CREATE TABLE page, just to stay there with the default "use Define-> column specification." If you want, after completing "build" your table specification here, you will have a "Show sql" option to show you the actual sql statement that will be executed to create your table.

• How to create the listener.ora file

  Hi all
  
  My emca start dbconsole... successful because I do not have in network/admin listener.ora. My interlocutor only runs on the default config
  
  I can't run gui netca bacause I connect only remotely using PuTTY.
  
  I want to run in silent mode netca to create the listener.ora file... can you give me response.file of the sample for netca?
  
  
  Thank you
  
  Published by: yxes2013 on 3.5.2013 04:14

  I meet emca error before and it is just resolved when I created lisnter.ora, so I want to try it.

  I doubt that listener.ora was the cause.

  Although experience is a better teacher.

  No, trying to find the cause of a problem is a better teacher, just try things at random - it's a good way to teach you things like "emctl start dbconsole does not work without a listener.ora", which is clearly false.

  Once start emca

  The command is not 'emca,' maybe that's your problem.

  We don't know, because you have not copied/pasted something here, including the error message

• ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

  Hello
  
  Oracle 11 g 2 on windows 7, I of primary and standby on the same system (learning).
  
  When I check on status of primary and secondary use under request it gives applied log is 'NO '.
  
  SQL > select sequence #, used from v$ archived_log;
  
  SEQUENCE # APPLIED
  ---------- ---------
  516 NO.
  517 NO.
  NO. 523
  NO. 524
  525 NO.
  531 NO.
  NO. 532
  533 NO.
  NO. 541
  544 NO.
  
  When I checked error on DB primary .he give me more erro.
  SQL > SELECT 'ID', 'DB_status' STATUS DEST_ID, EXCURSION place "Archive_dest', 'ERROR' OF V$ ARCHIVE_DEST WHERE DEST_ID < = 5;
  ---------- ---------
  Error Archive_dest
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  1 D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG ORA-19504: cannot create the file «»
  
  2 STAND ORA-00270: creation of the archiving log error
  
  I checked the space on the system... is there enough free space on the disk.
  
  On primary DB (destination of the journal archive)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  On standby DB (list of newspapers of record)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  Please guide it's because of the destination of the journal archive even shared by the standby and primary?
  
  If yes how do I change the destination of the newspaper archive on standby DB?
  
  Thank you.
  
  Edited by: 977220 April 18, 2013 20:49

  change initialization parameter

• ORA-20100: error: failure FND_FILE. Cannot create the file

  Hi all
  Simultaneous application of Bellow error
  
  We using ORACLE 10 g. R12
  OS: RHEL 4.4 (LINUX)
  
  
  
  
  
  ---------------------------------------------------------------------------
  Execution of the expedition: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module WSHINTERFACES: Interface travel Stop - SRS
  ---------------------------------------------------------------------------
  
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------
  
  * Starts * January 27, 2013 09:58:58
  Error ORACLE 20100 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Cannot create the file, l0633393.tmp in the directory/usr/tmp.
  You can find more information in the applications log.
  ORA-06512: at the 'APPS '. FND_FILE', line 554
  ORA-06
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is January 27, 2013 09:58:58
  
  ---------------------------------------------------------------------------

  This issue is related to the Oracle EBS, mark it as here the answer and open it

  Oracle Discussion forums' E-Business Suite

• Create the database fails with error ORA-01505: Error adding log files

  Hi all
  
  hope someone can help out me, I'm creating a database by using a SQL script, the content of the script is:
  create the testora database
  the user sys identified by oracle
  the user identified by oracle's system
  LogFile Group 1 ('/ u01/app/oracle/oradata/testora/redo01a.log ',' / u02/app/oracle/oradata/testora/redo01b.log') blocksize 512 re-use, 100 m in size.
  Group 2 ('/ u01/app/oracle/oradata/testora/redo02a.log ',' / u02/app/oracle/oradata/testora/redo02b.log') blocksize 512 re-use, 100 m in size.
  Group 3 ('/ u01/app/oracle/oradata/testora/redo03a.log ',' / u02/app/oracle/oradata/testora/redo03b.log') blocksize 512 re-use, 100 m in size.
  maxLogFiles 5
  maxlogmembers 5
  MAXDATAFILES 100
  US7ASCII character set
  AL16UTF16 national character set
  Local extended management
  DataFile ' / u01/app/oracle/oradata/testora/system01.dbf' re-use of 400 m size
  SYSAUX datafile ' / u01/app/oracle/oradata/testora/sysaux01.dbf' re-use of 400 m size
  default tablespace users
  DataFile ' / u02/app/oracle/oradata/testora/users01.dbf' size 500 m reuse autoextend on maxsize unlimited
  default temporary tablespace tempts1
  tempfile ' / u01/app/oracle/oradata/testora/temp01.dbf' size 20 m reuse autoextend on maxsize 4g
  Undo tablespace undotbs1
  DataFile ' / u01/app/oracle/oradata/testora/undotbs01.dbf' size 200 m reuse autoextend on maxsize unlimited
  ;
  
  It fails in the creation of the database with the following result:
  
  SQL > @/home/oracle/Oracle_Scripts/testora_db_script.sql
  create the testora database
  *
  ERROR on line 1:
  ORA-01092: ORACLE instance is complete. Disconnection forced
  ORA-01501: CREATE DATABASE failed
  ORA-01505: Error adding log files
  ORA-01184: logfile group 1 already exists
  Process ID: 3486
  ID of the session: 1 serial number: 3

  This is the documentation: http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_5004.htm#i2142335
  >
  If only the DB_RECOVERY_FILE_DEST initialization parameter is specified, Oracle database then creates a log file member to this place.