ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

Similar Questions

• Setup failed to create the directory [bonnefin] error 5: access denied

  Hello

  I tried to install some programs (2) on my computer, but an error message shows everytime I open the Setup program. The error message is the following:
  Setup could not create the directory "C\Users\[NAME]~1\AppData\Local\Temp\is-HJF7P.tmp\".
  Error 5: Access denied
  I don't know if it is a problem with Setup (probably not since it happens with both programs) or the user/computer account. Very probably the last. I searched this error and found a few threads, but they were out of date or on the settings for who can access temporary files (which is why I put this topic 'Security, confidentiality and account' by the way I checked and they are the right settings).
  Oh, and I use an acer aspire laptop with Windows 7. There is only one user account on my computer and I think I have administrator permissions.
  -----
  'florestan and Eusebius.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651>

  `~`

  The time and date of this moment in California, the United States is

  15:40
  Friday, June 21, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 22:40 on Friday, June 21, 2013
              

• Satellite C650 - failed to create the recovery disk - error 020150-20-00000000 code

  I hope this is the right place to post this, but I think I have the same problem with my Satellite C650. He keeps wasting DVDs by stopping and saying that it cannot read the file E:\ZZlmg\11544XSP.swm and gives an error code 020150-20-00000000. The file is located on the DVD. I use Verbatim DVD - R The Recovery Media Creator is trying to write the first disc and is at the point of check data. Can you think of another explanation for this error other than the cheap DVD option? Thank you

  Hello

  There are two explanations;
  Either the CD/DVD drive firmware is not up to date and contains no information about the drives used discs (CD or DVD) is not fully compatible.
  As you know this is happening and is not uncommon.

  So first check if a firmware update is available for your CD/DVD drive.
  The European driver of Toshiba page is the right place to look for that.
  More details you will find in detail if the firmware has been published for your ODD.

  If there is no update firmware of your CD/DVD drive, then you should test other discs

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• CS6 LR does not start, gives 2 error messages: internal error (failed to create the develop Presets; error has occurred the attempt to change the modules.

  I am running Yosemite (OS 10.10.5). Trying to open 6 LR, I get two error messages. (1) an internal error has occurred. Could not create the required folder: / Users/username/Library/Application Support / Adobe / Lightroom / develop Presets. (2) an error occurred when attempting to change modules.

  When I tried LR 5 running on the previous system, I got the same error module changing, but cannot find anything on the Adobe site and thought that maybe the program was not compatible with the system. But here again the same problem. I really want to stop using the old computer with LR 3 and use the updates, I bought.

  Hi Benjamin,

  You must change the permissions of the folder Adobe in two libraries.

  Browse to the location: ~/Library/Application Support/Adobe

  / Library/Application Support/Adobe

  CMD + click on the Adobe folder

  Click on Get Info

  Click the Permission & sharing

  Click on the padlock

  Unlock it

  Change the permissions of writing & for all users.

  Check the link and try the Solution 5: error changing modules

  Let us know if it helps.

  ~ Mohit

• Failed to create the recovery disk - error: differences between the following files

  Hello, I am using the recovery disc option, but during the creation of the third disc, I get this error repeatedly (I tried to create 4 + times now, using the same type of discs that worked well with the first 2 discs). The full error message is:

  "differences between the following files. "Source path: path:F\ZZImg\09753XSP2.swm E\HDDrecovery\SWImg\0975XSP2.swm target (error code: 02016F-3 c-00000000)"

  How to solve this? I want to reformat my laptop, and the thought that it would be better to create these discs first. It is recommended to have the front discs I try to reformat? This error would prevent me to use the option 'restore factory settings' which is present by pressing the 0 key during the loading screen?

  (I'm not very technically capable, so I am greatly worried something bad).

  Any help would be greatly appreciated.

  Thank you.

  Have you tried using different disks from different manufacturers?
  To do this. I had similar problem and it was not entirely compatible disc-related.
  I use TDK R CD or DVD. They work great!

• ORA-19506: failed to create the file for sequential access

  Hello, log backup archive My RMAN is a failure... Here is the info from the full log file. Can someone please shed some light on this...
  
  
  Recovery Manager: release 10.2.0.3.0 - Production on the game 17 Dec 09:00:02 2009
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  RMAN >
  connected to target database: INVENT (DBID = 12345667)
  
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 >
  using the control file of the target instead of recovery catalog database
  allocated channel: t1
  channel t1: sid = 959 devtype = SBT_TAPE
  channel t1: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  allocated channel: t2
  channel t2: sid = 962 devtype = SBT_TAPE
  channel t2: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  executing command: SET ORDER ID
  
  SQL statement: alter system archive log current
  
  From backup 17 December 09
  Current archived log
  channel t1: from archive newspaper backupset
  channel t1: specification of archive log backup set
  archive log entry thread = 1 = recid 61859 46634 = 705760770 stamp = sequence
  archive log entry thread = 1 sequence = recid 61860 = 46635 = 705762477 stamp
  archive log entry thread = 1 = recid 61861 46636 = 705765886 stamp = sequence
  archive log entry thread = 1 = recid 61862 46637 = 705767598 stamp = sequence
  archive log entry thread = 1 sequence = 61863 recid = stamp 46638 = 705769235
  archive log entry thread = 1 sequence = 61864 recid = 46639 stamp = 705769236
  archive log entry thread = 1 = recid 61865 46640 = 705773535 stamp = sequence
  channel t1: starting piece 1 to 17 December 09
  channel t2: from archive newspaper backupset
  channel t2: specification of archive log backup set
  archive log entry thread = 1 sequence 61866 recid = 46641 = 705774395 stamp =
  archive log entry thread = 1 = recid 61867 46642 = 705775744 stamp = sequence
  archive log entry thread = 1 = recid 61868 46643 = 705776075 stamp = sequence
  archive log entry thread = 1 = recid 61869 46644 = 705783627 stamp = sequence
  archive log entry thread = 1 = recid 61870 46645 = 705783628 stamp = sequence
  archive log entry thread = 1 = recid 61871 46646 = 705787215 stamp = sequence
  archive log entry thread = 1 sequence = recid 61872 stamp 46647-= 705787215 =
  archive log entry thread = 1 = recid 61873 46648 = 705804999 stamp = sequence
  archive log entry thread = 1 sequence = 61874 recid = stamp 46649 = 705834020
  channel t2: from room 1 to 17 December 09
  RMAN-03009: failure of the backup command on channel t2 at 2009-12-17 09:01:38
  «"ORA-19506: failed to create the batch file, name ="7bl14b16_1_1", parms ="»
  ORA-27028: skgfqcre: sbtbackup returned the error
  ORA-19511: error received from layer media manager, error text:
  VxBSACreateObject: Failed with the error:
  Server status: could not allocate new media for backup, storage unit has no available
  T2 channel disabled, job failed on it will run on another channel
  output channel: t1
  output channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on channel t1 at 2009-12-17 09:02:43
  «"ORA-19506: failed to create the batch file, name ="7al14b16_1_1", parms ="»
  ORA-27028: skgfqcre: sbtbackup returned the error
  ORA-19511: error received from layer media manager, error text:
  VxBSACreateObject: Failed with the error:
  Server status: could not allocate new media for backup, storage unit has no available
  
  RMAN >
  
  Complete recovery manager.

  It's all about media layer. You may need to ask Veritas netbackup admin to fix the problem and resubmit the backup after that.

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to the/tmp file

  Hi, I'm under RapidWiz 12.2.0.50 to make a R12.2 installation on a platform for x 86-64 Oracle Linux 7.1.

  I get the error message

  RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to /tmp/11061511/lab3_DEMO1_db.xml file

  However I've looked at what my directory/tmp is completely open (wise authorization), as well as the subdirectory 11061511 under

  lab3-nms: / > ls - al

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22 tmp

  lab3-nms: / tmp > ls - al

  Total 16

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22.

  drwxrwxrwx. 19 root root 4096 Nov 6 14:19...

  drwxrwxrwx 2 root root 25 Nov 15:11 6 11061511

  drwxrwxrwx. 2 root root 19 6 Nov 14:18 .esd-0

  drwxrwxrwx. 2 root root 6-9 Oct 23:16 current unix

  drwxrwxrwx. 2 root root 17 6 Nov 15:11 hsperfdata_root

  drwxrwxrwx. 2 root root 14:18 Nov 94 6. ICE-unix

  drwxrwxrwx 2 root root 23 6 Nov 14:18 ssh-KQeDztQLkQHj

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-OgJMdJ

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-S5pkDq

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-x5Iry2

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. Test-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 0-lock

  drwxrwxrwx. 2 root root 24 6 Nov 14:18. X 11-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 1-lock

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. XIM-unix

  lab3-nms: / tmp/11061511 > ls - al

  Total 16

  drwxrwxrwx 2 root root 25 Nov 15:11 6.

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22...

  -rwxrwxrwx 1 root root 8529 6 Nov 15:22 11061511.log

  any ideas what the permission problem?

  Thank you

  Jim

  Found the problem and it's nothing to do with users, groups, and permissions of files (tmp or anything else besides!)

  The problem was that I had not put the sysconfig according the upgrade installation Notes & R12.2 for Linux x 86-64 ( note 1330701.1 )

  I guess the bum steer, which gives install them quick - is indicating that the question is a problem of permission of the files in / tmp, when it is not really!

  The only thing I can think is that it uses sysconfig content to add the name of host or domain, the file name, he tries to put in / tmp.

  hope this helps

  Jim

• Error: The database file location: [INS-32012] failed to create the directory.

  Hello

  I have a problem with the installation of database 11 g 2 on OL5.

  Error:

  Location of the database file: [INS-32012] failed to create the directory.

  Although

  drwxr-xr-x 2 root oinstall 4096 Apr 9 17:56 oradata

  drwxr-xr-x 3 755 oinstall 4096 Apr 9 16:27 products

  U01/app/oracle/a 755 permission

  Thank you

  Abhishek

  chmod-r 755/U01

  chown R oracle: oinstall/U01

  the second command change the user and the group owner Of/U01 (including all subdirectories and files) for oracle and oinstall respectively.

  HTH

  Tobi

  Tobi & #39; Oracle DBA s & amp; Blog of UNIX

• Error 5: Access is denied: failed to create the installation directory...

  I am installing an "Advanced System Care" program I get an error message, Setup failed to create the directory 'C:\users\arthur\appdata\local\temp\is-rukl.temp '.

  error 5 access is denied

  I realized today that I think I got this error on several things, I tried to install recently.  I thought it was a problem with the actual program installer.

  I have no idea where to start even.  Thanks for any help you can give me

  The problem is with the security permissions on the temp of your profile folder. To correct it access %Temp% or C:\Users\[Username]\AppData\Local and right click the Temp folder and choose Properties, then click the Security tab, and click Advanced.

  On the permissions tab, you should see the permissions that are there. There are 3 that are:

  'SYSTEM' with a total control that applies to "this folder, subfolders and files.

  "Administrators" with full control that applies to "this folder, subfolders and files.

  "Your username" in the full control that applies to "this folder, subfolders and files.

  and all 3 must be inherited from the folder C:\Users\[Username]\.

  If you have the option "Include the permissions that can be inherited from the parent to this object" checked, then check it and click on continue if there are problems, then remove the permissions that are not inherited.

  Once you click on 'Apply' and click 'OK', you must have the permissions to write to the directory and you won't get the error messages more.

  Hope this has solved your problem

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• Failed to create the fast refresh on the materialized view

  Hi, I am creating a materialized on the tables with fast refresh view on commit but I get an error message.

  I have created the following logs:

  Bonus CREATE MATERIALIZED VIEW LOG ON
  Users TABLESPACE
  WITH THE PRIMARY KEY
  INCLUDING THE NEW VALUES

  Used to CREATE MATERIALIZED VIEW LOG ON
  Users TABLESPACE
  WITH THE PRIMARY KEY
  INCLUDING THE NEW VALUES

  I then try to create the following:

  Test.BAM CREATE MATERIALIZED VIEW

  IMMEDIATE CONSTRUCTION
  COOL OFF QUICKLY ON COMMIT
  AS
  SELECT a.dept_no, SUM (a.salary)
  EMPLOYEE a, b bonus
  WHERE a.employee_id = b.employee_id
  GROUP BY dept_no

  When I do that, I get the following error:

  . ORA-12032: cannot use column rowid of materialized

  view log on 'test '. "" BONUS ".

  If I change to a full refresh, it works pretty well. If I create a MV with a fast refresh on a query just within the limits of the table bonus it also works very well, for example ' select * bonus where employee_id = 2'

  What I am doing wrong? Also when looking at the notes for MV connects in some places, he said using the primary key and others, he says to the sequence of use and row_id. Which is correct and what difference does it make?

  11.2 aix.

  Thank you very much

  I suggest that investigate you the reason why your MV is not quickly updatable with the following method:

  (1) create MV_CAPABILITIES_TABLE with @?/rdbms/admin/utlxmv.sql

  (2) exec ('BAM') dbms_mview.explain_mview

  3)

  column format a100 msgtxt

  column related_text format a20

  SELECT the possible, capability_name, related_text,

  msgtxt

  OF mv_capabilities_table;

  That should tell you the reason why he isn't yet quickly updatable.

  There was a popular quote on men and fishing, but I don't remember it for now :-)

  Kind regards

  Uwe Hesse

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Failed to create the object: VcFolder

  When you try to use the following line:

  var myVcFolder = new VcFolder();

  I get the error message: failed to create the object: VcFolder: com.vmware.vmo.plugin.vi4.model.VimFolder

  I'm new script in orchestrator.  I guess I'm just an import or missing something.

  Any help would be greatly appreciated!

  Records as VirtualMachines and others are objects managed - they live on the vCenter and what you work with is a proxy. You can instantiate the VcFolder object in the script, but will not create an object in the vCenter. The right way is to get a proxy to an instance of file and call the method "createFolder". By default, you have a rootFolder object named "Data centers" and you create your hierarchy below.